Rubber & FoamSKU IP-SIUC-3.6X6X1.6-30-BLACK
Silicone U Channel – 3.6mm x 6mm for 1.5–1.6mm Panels – 30m Coil
A push-on silicone U channel sized for 1.5mm and 1.6mm sheet: the gauge most often used for machine guards, enclosure panels, splash backs and appliance cladding. The 1.6mm slot is 5mm deep, so it seats well over a raw cut edge and holds by friction on most jobs, while the finished trim is only 3.6mm wide and 6mm tall, which keeps the edge neat and unobtrusive. It is extruded from platinum-cured silicone with a smooth, glossy finish that does not yellow, the compound is approved for food-contact use, and it stays flexible from -40°C to +200°C. Sold as one continuous 30m coil in black, translucent or white.
At a glance
- Made for panels and edges 1.5mm to 1.6mm thick
- 3.6mm wide x 6mm high, 1.6mm slot, 5mm slot depth, 1mm walls and base
- Platinum-cured silicone, 60 Shore A: soft enough to fit by hand, firm enough to grip
- Service range -40°C to +200°C, from freezer doors to oven and heater housings
- Compound approved for food-contact applications
- Glossy, non-yellowing surface with very good weather resistance
- Black, translucent or white, same price in every colour
- 30m coil, about £20.07 per metre
Typical uses
- Capping the top edge of 1.5mm stainless side guards and hoppers on food and packaging lines
- Finishing cut-outs and edges on 16-gauge steel enclosure doors, covers and control panels
- Edging mixer bowls, trays and splash guards in bakeries and commercial kitchens
- Trimming appliance, kiosk and vending machine panels for a clean, safe edge
- Heat-resistant edge trim around oven, heater and lamp housings where PVC would soften
- Protecting hands and cables from sharp edges on fabricated sheet-metal parts
Technical drawing
![]()
Which size do I need?
Measure the thickness of the edge with callipers, then pick the channel whose slot matches it. A slot that is too wide will slide off; one that is too narrow can split.
| Silicone U channel | Fits edge thickness |
|---|---|
| Silicone Round U Channel 3mm x 5mm | 1mm |
| Silicone U Channel 3.2mm x 5mm | 1.0 – 1.2mm |
| Silicone Round U Channel 3.2mm x 7.8mm | approx. 1.2mm |
| Silicone U Channel 3.6mm x 6mm (this one) | 1.5 – 1.6mm |
| Silicone U Channel 7.1mm x 13mm | 4mm |
| Silicone U Channel 9.1mm x 14mm | 5mm |
Specification
| Property | Value | Test method / basis |
|---|---|---|
| Profile and dimensions | ||
| Profile | U channel with rounded base (push-on edge trim) | – |
| Overall width | 3.6 mm | Nominal, from profile drawing |
| Overall height | 6.0 mm | Nominal, from profile drawing |
| Slot (grip) width | 1.6 mm | Nominal, from profile drawing |
| Slot depth | 5.0 mm | Nominal, from profile drawing |
| Wall and base thickness | 1.0 mm | Nominal, from profile drawing |
| Fits panel / edge | 1.5 – 1.6 mm | Manufacturer's fitting range |
| Weight | approx. 14 g per metre, approx. 0.43 kg per 30 m coil | Calculated from section area (about 12.5 mm²) at typical silicone density |
| Material | ||
| Material | Silicone rubber, platinum cured | Manufacturer's specification |
| Hardness | 60 Shore A | Shore A durometer |
| Minimum service temperature | -40 °C | Manufacturer's rating |
| Maximum service temperature | +200 °C | Manufacturer's rating |
| Weathering resistance | Excellent | Manufacturer's rating |
| Oil resistance | Fair (not for continuous oil or fuel immersion) | Manufacturer's rating |
| Surface finish | Smooth, high gloss, non-yellowing | Visual |
| Supply | ||
| Colours | Black, translucent, white | – |
| Unit of sale | One continuous 30 m coil | – |
| Price per metre | approx. £20.07 inc VAT | Coil price ÷ 30 m |
Materials and compliance
- Platinum-cured silicone: the rubber is vulcanised with a platinum catalyst instead of peroxide. That leaves no peroxide by-products in the part, keeps the translucent and white grades from yellowing, and gives the smooth, glossy skin that is easy to wipe down.
- Food-contact approved compound: the manufacturer states the compound is approved for food-contact applications, so it is a sensible choice for trims on food processing, bakery, catering and packaging equipment.
- Stable across temperature: silicone keeps its flexibility from -40°C to +200°C, so it neither cracks in a cold store nor goes soft beside a heater.
The approval relates to the material. Whether a finished assembly complies depends on the application. If you need a declaration of compliance for an audit, contact our team before ordering and we will confirm what paperwork is available for this profile.
How much do I need?
Add together the length of every edge you want to cover and allow about 5% for trimming and joints. Example: twenty conveyor side guards, each with a 1.4m top edge, need 28m, or about 29.4m with allowance, so one 30m coil does the job.
Fitting tips
- Deburr the edge, then wipe it clean and dry
- Start at one end and press the channel on with your thumb, working along the edge
- Cut with a sharp knife or scissors slightly over length and push the ends together for a tight butt joint
- For a permanent or sealed fit, or where there is vibration, run a thin bead of silicone or polyurethane sealant into the slot first
Questions
What thickness of panel does it fit?
It is designed for edges 1.5mm to 1.6mm thick, which covers 16-gauge steel and most 1.5mm stainless and aluminium sheet. For 1.0–1.2mm sheet choose the 3.2mm x 5mm channel instead.
Does it need glue?
Usually not. On a clean 1.5–1.6mm edge the 5mm-deep slot grips by friction. Where the part vibrates, is handled often or must be sealed, bed it in silicone or polyurethane sealant.
Is it suitable for food equipment?
Yes. The manufacturer states the compound is approved for food-contact applications, and the glossy surface wipes clean easily.
What temperatures can it handle?
It is rated from -40°C to +200°C, so it suits ovens, heater panels and lamp housings as well as chillers and freezers.
Will it bend round corners?
It follows gentle curves and bowl rims easily. For a tight 90° corner, cut a small V notch in the base or mitre and butt two lengths together.
Can I use it near oil?
Occasional splashes are fine, but its oil resistance is only fair. For parts that sit in oil or fuel, a nitrile or fluorosilicone profile is the better choice.
Which colour should I choose?
Translucent is milky and blends into stainless steel and glass. White gives a clean opaque edge for white goods and food areas. Black suits painted machinery and enclosures. All three are the same compound, profile and price.
Can I buy less than 30m?
This listing is a full 30m coil. For cut lengths or volume pricing, ask our team for a quote.
Need help choosing an edge trim or seal? Contact our team on +44 1282 277786 or sales@industrial-polymers.co.uk.
Product details
| SKU | IP-SIUC-3.6X6X1.6-30-BLACK |
|---|---|
| Weight | 0.99 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone U Channel – 3.6mm x 6mm for 1.5–1.6mm Panels – 30m Coil