Rubber & FoamSKU IP-SILS40-10X1
Solid Silicone Rubber Strip – Soft 40° Shore A – 5m or 10m Roll
Price shown updates with the option you pick.
This silicone rubber strip in soft 40 Shore A is a translucent, solid rectangular strip for food-safe gaskets, door seals and high-temperature packing. Choose any width from 10mm to 50mm and any thickness from 1mm to 12mm; it is sold by the roll – 10m for 1mm to 6mm thick and 5m for 8mm to 12mm thick.
At a glance
- Soft 40° Shore A solid silicone strip
- 110 sizes: 10 widths (10–50mm) × 11 thicknesses (1–12mm)
- Translucent, unfilled silicone compliant with FDA 177.2600 and EC 1935/2004 for food contact
- Working range -60°C to 230°C, intermittent to 250°C
- Good shape memory: compression set 25% after 24 hours at 150°C
Typical uses
- Lid and door gaskets on food processing equipment, hoppers and containers
- Oven, dryer and heat-sealer door seals where rubber would harden
- Soft packing and anti-vibration pads under panels and guards
- Flange and inspection-hatch seals cut to length on site
Which one do I need?
| Thickness | Roll | Best for |
|---|---|---|
| 1mm – 2mm | 10m | Thin flat gaskets, shims and lining between close-fitting metal faces |
| 2.5mm – 4mm | 10m | General lid, door and hatch gaskets with modest gaps |
| 5mm – 6mm | 10m | Uneven or slightly warped faces needing more compression travel |
| 8mm – 12mm | 5m | Large gaps, heavy cushioning and anti-vibration packing |
Technical drawing
Specification
| Material | Solid silicone rubber |
| Colour | Translucent |
| Hardness | 40° Shore A |
| Widths | 10, 12, 15, 20, 25, 30, 35, 40, 45, 50mm |
| Thicknesses | 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12mm |
| Unit of sale | One roll: 10m (1–6mm thick) or 5m (8–12mm thick) |
| Working temperature | -60°C to 230°C (intermittent to 250°C) |
| Tensile strength | 9 MPa |
| Elongation at break | 525% |
| Compression set | 25% (24 hours at 150°C) |
| Food contact | FDA 177.2600, EC 1935/2004 |
How much do I need?
Add up the perimeter of every face you are sealing and allow about 5% for trimming. Example: a 600mm × 400mm oven door needs (600 + 400) × 2 = 2,000mm, so 2.1m with allowance. One 10m roll of 3mm strip covers four such doors; in 8mm (5m rolls) you would need two rolls.
Fitting tips
- Cut with a sharp knife against a steel rule for a square end; scissors pinch soft 40 Shore silicone.
- Clean and degrease the seating face; ordinary contact adhesives do not bond silicone, so use a silicone adhesive or primer if it must be bonded.
- Lay the strip without stretching it – stretched silicone shrinks back and opens gaps at the corners.
Complete your project
- Silicone L Profile – 60° Shore A – 10mm x 5mm – 25m Coil
- Silicone Round U Channel – 10mm x 10mm – 25m Coil
- Silicone Round U Channel – 6.1mm x 6.3mm – 25m Roll
Questions
Is this silicone rubber strip food safe?
Yes. The compound complies with FDA 177.2600 and EC 1935/2004 for food contact.
What is the difference between 40 and 60 Shore A silicone strip?
40 Shore A is softer: it compresses with less force and conforms to uneven surfaces, which suits light lids and doors. 60 Shore A is firmer and holds its shape better under high clamping loads.
Why are the thicker sizes supplied on shorter rolls?
The 8mm, 10mm and 12mm strips are supplied as 5m rolls because of their bulk; 1mm to 6mm comes on 10m rolls.
Will it take oven temperatures?
Yes. It works continuously up to 230°C and copes with short peaks to 250°C, and stays flexible down to -60°C.
Not sure which width or thickness suits your gasket? Contact our team with your dimensions and we will help.
Product details
| SKU | IP-SILS40-10X1 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Solid Silicone Rubber Strip – Soft 40° Shore A – 5m or 10m Roll