Rubber & FoamSKU IP-SILT-10X13-BLACK
T Seal Profile, Silicone, 10mm X 13mm, 25m Coil, FDA And WRAS Approved
This 10mm x 13mm silicone T profile provides a reliable, flush barrier for narrow structural gaps and tracking. Supplied as a 25m coil, it is manufactured from high-purity, food-grade silicone that remains flexible across extreme temperatures. It is widely used in food processing, marine applications, and industrial environments where standard rubber or PVC would degrade.
At a glance
- 10mm head width x 13mm total height
- Supplied as a continuous 25m coil
- FDA 21 CFR 177.2600 and EC1935/2004 compliant
- WRAS approved for drinking water applications
- Operating temperature range of -50°C to +180°C
- Available in 7 colours
Typical uses
- Food processing lines and catering units
- Temperature-sensitive HVAC ducting and furnaces
- Marine hatch boundaries and structural joints
- Automotive ECU bays and dashboard trim
Technical drawing
Specification
| Material | Silicone |
| Width | 10mm |
| Height | 13mm |
| Base Thickness | 5mm |
| Hardness (Shore A) | 60° |
| Density | 1.15 g/cm³ |
| Tensile Strength | 11 N/mm² |
| Elongation at Break | 550% |
| Operating Temperature | -50°C to +180°C |
Installation and care
Ensure the target slot is clean before installation. Measure and mark the required length, then cut cleanly using a utility knife or industrial shears. If required, apply a suitable silicone adhesive into the channel. Press the leg of the T seal firmly into the gap and smooth the upper wings flat against the mounting edge for uniform contact.
Fitting tips
- Clean the channel thoroughly to ensure good adhesion and a tight fit.
- Use a non-permanent marker to trace cut coordinates.
- Ensure the upper wings sit completely flat against the surface.
Complete your project
- Silicone T Seal Profile – 10mm x 14mm – 25m Coil
- Silicone T Profile – 11mm x 11.4mm – 25m Coil
- Silicone T Profile – 12mm x 8mm Head – 25m Coil
Data sheet
Download the technical data sheet (PDF)
Questions
Is this profile suitable for food contact?
Yes, it fully complies with FDA 21 CFR 177.2600 and EC1935/2004 food-grade requirements.
Can it be used outdoors?
Yes, it provides excellent resistance to UV rays, ozone, and outdoor weathering.
What temperatures can it withstand?
It functions effectively in extreme temperatures ranging from -50°C up to +180°C.
Is it suitable for drinking water applications?
Yes, the material is WRAS approved and certified safe for public water supply and drinking water applications.
Need help choosing the right profile? Contact our team for advice.
Product details
| SKU | IP-SILT-10X13-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:T Seal Profile, Silicone, 10mm X 13mm, 25m Coil, FDA And WRAS Approved