Rubber & FoamSKU IP-SILT-25X25-BLACK
Silicone T Seal Profile – 25mm x 25mm, Food Grade, 7 Colours – 25m Roll
This silicone T seal profile is the largest in the range: a 25mm wide flat flange on a 25mm deep stem, for bridging wide joints and anchoring deep in slots on food, HVAC and marine equipment. It is food grade, comes in seven colours and is sold as one continuous 25m roll.
At a glance
- Silicone T section: 25mm flange, 25mm overall height
- 3mm thick flange and 3mm stem, 60 Shore A
- Food grade: FDA 21 CFR 177.2600 and EC 1935/2004, plus WRAS approval
- Stays flexible from -50°C to +180°C
- Good resistance to UV, ozone and weathering
- Black, white, translucent, red, green, blue or yellow
Typical uses
- Covering wide joints on food and beverage processing equipment
- Deep slot seals on HVAC ducting and hot enclosures
- Weatherproof joints on marine hatches, windows and panels
- Colour-coded seals for food zones and hygiene areas
- Engine bay and transit enclosure trims
Which one do I need?
| Silicone T profile | Flange width | Best for |
|---|---|---|
| 12mm x 15mm | 12mm | Narrow joints, deep slot |
| 14.5mm x 8mm | 14.5mm | Medium joints, shallow slot |
| 25mm x 25mm (this item) | 25mm | Wide joints up to about 20mm with a deep 22mm stem |
Technical drawing
Specification
| Material | Silicone, FDA 21 CFR 177.2600, EC 1935/2004 and WRAS approved |
| Flange width | 25mm |
| Overall height | 25mm |
| Flange thickness | 3mm |
| Stem thickness | 3mm |
| Hardness | 60° Shore A |
| Operating temperature | -50°C to +180°C |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Tear strength | 26 N/mm |
| Colours | Black, white, translucent, red, green, blue, yellow |
| Unit of sale | One 25m roll |
How much do I need?
Add up the length of every joint to be covered. A walk-in chiller with four 2.4m vertical panel joints and two 3m ceiling joints needs 9.6m + 6m = 15.6m, so one 25m roll covers it with about 9m left for a second job or repairs.
Fitting tips
- Clean and dry the slot so the 3mm stem can be pushed fully home.
- Press the stem in along the length, then press the 25mm flange flat over both sides of the joint.
- Cut with a sharp knife or shears for square butt joints.
- For a permanent fix, add a high-temperature silicone adhesive in the slot and let it cure before use.
Complete your project
- Silicone T Seal Profile – 12mm x 15mm, Food Grade – 25m Roll
- Silicone T Seal Profile – 14.5mm x 8mm – 25m Roll
- Silicone T Profile – 12.3mm x 11.4mm – 25m Roll
Questions
Is this silicone T seal food safe?
Yes. It complies with FDA 21 CFR 177.2600 and EC 1935/2004 for food contact and carries WRAS approval.
What joint width does the 25mm flange cover?
With a few millimetres of overlap on each side, the flange comfortably covers joints up to about 20mm wide.
What slot does the stem need?
The stem is 3mm thick and 22mm deep below the flange, so the slot should be about 3mm wide and at least 22mm deep, or the stem can be trimmed shorter.
Can it be used outdoors and on hot equipment?
Yes. Silicone resists UV, ozone and weathering and stays flexible from -50°C to +180°C.
Need help choosing the right seal? Contact our team.
Product details
| SKU | IP-SILT-25X25-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone T Seal Profile – 25mm x 25mm, Food Grade, 7 Colours – 25m Roll