
Rubber & FoamSKU IP-TPEL-20X20X3.5-25
TPE L Profile – 20mm x 20mm x 3.5mm Black Angle Trim – 25m or 50m Roll
Price shown updates with the option you pick.
This TPE L profile 20mm x 20mm is a flexible black angle trim with 3.5mm thick legs, used to protect, seal and neatly finish square edges on cabinets, panels, glazing, vehicle bodies and machinery. It is sold by the roll in 25m or 50m lengths, ready to cut to the lengths you need.
At a glance
- Equal-leg L section, 20mm x 20mm
- 3.5mm leg thickness for a firm, protective edge
- 67° Shore A thermoplastic elastomer (TPE), 100% recyclable
- Working temperature -40°C to +90°C
- Weather, UV and chemical resistant for indoor or outdoor use
- About 154g per metre
- Supplied as a 25m or 50m roll
Typical uses
- Edge protection on steel cabinets, enclosures and machine guards
- Neat trim finish on panel corners and sheet edges
- Sealing gaps around door and window frames
- Covering sharp exposed edges to reduce knocks and snagging
- Edge trim in vehicle, caravan and rail body building
Which one do I need?
| Need | Choose |
|---|---|
| Firm protective trim on 90° edges up to about 16mm thick | TPE L profile 20mm x 20mm x 3.5mm (this item) |
| Heat-resistant or food-area angle trim | A silicone L profile of a similar size |
| Thinner, lighter edge finish on small panels | A small silicone L profile such as 9mm x 11mm |
| Shorter run, under 25m | 25m roll |
| Long runs or several jobs | 50m roll |
Technical drawing
Specification
| Profile | Equal-leg L (angle) |
| Size | 20mm x 20mm |
| Leg thickness | 3.5mm |
| Material | Thermoplastic elastomer (TPE) |
| Hardness | 67° Shore A |
| Colour | Black |
| Temperature range | -40°C to +90°C |
| Tensile strength | 7 MPa |
| Elongation at break | 750% |
| Compression set, 22h at 23°C / 70°C / 100°C | 15% / 29% / 54% |
| Weight | 154g per metre |
| Tolerance | ISO 3302-1 E2 / L2 |
| Unit of sale | 25m or 50m roll |
How much do I need?
Add up every edge you want to cover and allow about 5% for trimming. Example: a run of ten 1000mm wide steel cabinets with the top front edge and both top side edges (500mm deep) trimmed needs 10 x (1.0 + 0.5 + 0.5) = 20m, plus 5% = 21m, so one 25m roll is enough; trimming all four vertical corners of the same cabinets at 1.8m high would add 72m, making a 50m roll plus a 25m roll the better buy.
Fitting tips
- Clean and degrease the edge first; the trim can be press-fitted or bonded in place.
- For a bonded fit use a polyurethane or silicone sealant adhesive and let it cure fully before use.
- Cut slightly oversize and push the ends together rather than stretching the trim along the edge.
- Mitre the trim at 45° where two edges meet for a neat corner.
- Cut with sharp shears, a utility knife or a fine-toothed saw for a square end.
Complete your project
- Silicone L Profile – 10mm x 30mm x 5mm – 10m or 25m Roll
- Silicone L Profile – 9mm x 11mm – 25m Coil
- TPE Sponge D Profile – 10mm x 8mm Adhesive Backed – 100m Coil
Questions
Can the 20mm x 20mm TPE L profile be used outdoors?
Yes. TPE resists weathering, UV and many chemicals and works from -40°C to +90°C.
How do I fix it in place?
It can be press-fitted where the edge allows, or bonded with a polyurethane or silicone sealant adhesive on a clean, dry surface.
Will it spring back after being knocked?
Yes. TPE has good flex-fatigue resistance and returns to shape after compression; its compression set is 15% after 22 hours at 23°C.
How do I cut it?
Sharp shears, a utility knife or a fine-toothed saw all give a clean cut.
Is it recyclable?
Yes, the profile is made from 100% recyclable thermoplastic elastomer.
Not sure which size you need? Contact our team and we will help you choose.
Product details
| SKU | IP-TPEL-20X20X3.5-25 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE L Profile – 20mm x 20mm x 3.5mm Black Angle Trim – 25m or 50m Roll