
Rubber & FoamSKU IP-TPED-10X8-STD
TPE Sponge D Profile – 10mm x 8mm Adhesive Backed – 100m Coil
This TPE sponge D profile 10mm x 8mm is a self-adhesive hollow D seal for closing 6mm to 8mm gaps on doors, hatches, panels and equipment enclosures. It is sold as one continuous 100m coil, with a solid TPE base carrying the adhesive and a soft TPE foam bulb that compresses to make the seal.
At a glance
- Hollow D section, 10mm wide x 8mm high
- Dual hardness: solid 30° Shore A base, soft 15° Shore A foam bulb
- Seals gaps from 6mm to 8mm at about 25% compression
- Factory-applied self-adhesive backing, no glue or fixings needed
- Working temperature -50°C to +75°C
- Weather and UV resistant thermoplastic rubber (TPE), fully recyclable
- Supplied as a 100m coil, about 31g per metre
Typical uses
- Weather seal on industrial door and window frames
- Closing gaps around electrical enclosure and control cabinet doors
- Draught and dust seal on access hatches and inspection panels
- Soft buffer strip on machine guards and equipment lids
- Marine and vehicle hatch sealing where a low-profile seal is needed
Which one do I need?
| Profile | Size (W x H) | Gap it seals | Supplied as |
|---|---|---|---|
| TPE sponge D profile (this item) | 10mm x 8mm | 6mm to 8mm | 100m coil |
| TPE sponge D profile, larger | 25mm x 14mm | 7.5mm to 13mm | 25m coil |
| TPE sponge seal, square-backed | 14mm x 20mm | wider, deeper gaps | 50m coil |
Technical drawing
Specification
| Profile | Hollow D, self-adhesive |
| Size | 10mm wide x 8mm high |
| Base | Solid TPE, 30° Shore A |
| Bulb | TPE foam, 15° Shore A |
| Gap range | 6mm to 8mm (about 25% compression) |
| Colour | Black |
| Temperature range | -50°C to +75°C |
| Weight | 31g per metre |
| Tolerance | ISO 3302-1 E2 / L2 |
| Unit of sale | 100m coil |
How much do I need?
Measure the full perimeter of every opening you are sealing and add about 5% for corners and trimming. Example: a 900mm x 2000mm door frame sealed on three sides needs 0.9 + 2.0 + 2.0 = 4.9m, so one 100m coil covers around 20 doors of that size, or about 50 enclosure doors of 600mm x 800mm sealed on all four sides.
Fitting tips
- Clean and degrease the frame with solvent wipe and let it dry fully before peeling the liner.
- Fit indoors at room temperature where possible for the best adhesive bond.
- Peel the liner a little at a time and press the solid base down firmly along its full length.
- At corners, cut a 45° notch in the base rather than stretching the seal round the bend.
- Check the door closes with the bulb squashed by about 2mm; more than that can stop latches engaging.
Complete your project
- TPE Sponge D Profile – 25mm x 14mm Adhesive Backed – 25m Coil
- TPE Sponge Seal – 14mm x 20mm with Adhesive Backing – 50m Coil
- Neoprene Sponge Strip – 10 x 10mm, Self-Adhesive – 10m Coil
Questions
What gap does the 10mm x 8mm D profile seal?
It is designed for gaps of 6mm to 8mm, compressing by about a quarter of its height when the door or lid is closed.
Is it suitable for outdoor use?
Yes. TPE resists weathering and UV and stays flexible from -50°C to +75°C.
Do I need glue or screws?
No. The solid base carries a factory-applied adhesive; on a clean, dry surface it needs only firm hand pressure.
Can I cut it to length?
Yes, a sharp knife or heavy scissors gives a clean square cut. It is sold as a 100m coil that you cut to the lengths you need.
Is it recyclable?
Both the solid base and the foam bulb are thermoplastic elastomer, which can be recycled at end of life.
Not sure which size you need? Contact our team and we will help you choose.
Product details
| SKU | IP-TPED-10X8-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Sponge D Profile – 10mm x 8mm Adhesive Backed – 100m Coil