
Rubber & FoamSKU IP-TPE-6X5.5-STD
TPE Sponge Protective D Profile – 6mm x 5.5mm – 100m Coil
A small self-adhesive D profile for closing thin gaps of 3.5mm to 5.5mm and for light bump protection where a bigger seal would be clumsy. A hollow TPE foam bulb (15 Shore A) sits on a solid 1.5mm TPE base, and the base comes with adhesive tape already applied, so you cut it, peel the liner and press it on. Supplied as one continuous 100m coil in black.
At a glance
- Size: 6.0mm wide x 5.5mm high, 0.8mm foam wall, 1.5mm solid base
- Fills gaps of: 3.5mm to 5.5mm (the bulb is designed for about 25% working compression)
- Two hardnesses in one extrusion: soft foam bulb for sealing and cushioning, firmer solid base for a flat, stable bonding face
- Self-adhesive: tape pre-applied to the base, no separate glue needed
- Temperature: -50°C to +75°C
- Outdoor use: good UV and weather resistance, non-marking
- Weight: 17g per metre, so the full 100m coil is about 1.7kg
Technical drawing

Nominal dimensions in mm. Manufacturing tolerances to ISO 3302-1, extrusion classes E2 (cross-section) and L2 (length).
Specifications
| Property | Value | Standard / basis |
|---|---|---|
| Profile type | Hollow D (bulb) on a flat solid base, self-adhesive | Manufacturer drawing |
| Overall width | 6.0 mm | Nominal, ISO 3302-1 E2 |
| Overall height (base to top of bulb) | 5.5 mm | Nominal, ISO 3302-1 E2 |
| D (bulb) wall thickness | 0.8 mm | Nominal, ISO 3302-1 E2 |
| Solid base thickness | 1.5 mm | Nominal, ISO 3302-1 E2 |
| Gap it fills (clearance) | 3.5 mm to 5.5 mm | Manufacturer datasheet |
| Working compression of bulb | About 25% | Manufacturer stated |
| Bulb material | TPE foam (thermoplastic elastomer sponge) | Manufacturer datasheet |
| Base material | Solid TPE (thermoplastic elastomer) | Manufacturer datasheet |
| Bulb hardness | 15 Shore A | Shore durometer, as stated by the manufacturer |
| Base hardness | 30° (product page states Shore A, datasheet states Shore D) | Shore durometer, as stated by the manufacturer. Ask us if the base hardness is critical |
| Fixing | Pre-applied adhesive tape with release liner on the base | Adhesive grade and tape thickness not stated |
| Service temperature | -50 °C to +75 °C | Manufacturer datasheet |
| Weight | 17 g/m (about 1.7 kg per 100 m coil) | Manufacturer datasheet |
| Colour | Black | - |
| Supplied length | 100 m continuous coil | ISO 3302-1 L2 length tolerance |
| Manufacturing tolerance | ISO 3302-1, class E2 (cross-section), L2 (length) | ISO 3302-1 |
Materials and compliance
The bulb is a closed TPE foam and the base is solid TPE, both thermoplastic elastomers. The manufacturer states the profile has good UV and weather resistance, is non-marking and is made from 100% recyclable material.
The manufacturer does not state any food-contact (FDA, EC 1935/2004), drinking-water (WRAS), REACH, RoHS or fire-rating approval for this profile, so we do not claim any. If your application needs a certified material, ask us before you order.
Where it is used
- Light-duty door and hatch seals on cabinets, enclosures, panels and lids
- Window, frame and cupboard draught strips where the gap is only 3.5mm to 5.5mm
- Soft bump stops and surface protection on edges, shelves and equipment
- Vehicle, caravan and trailer trim, interior and exterior
- Small machinery guards and industrial housings
How to fit it
- Measure the gap with the door or lid closed. It needs to be between 3.5mm and 5.5mm for this size.
- Clean the mounting surface with a degreaser such as isopropyl alcohol and let it dry. The bond is only as good as the surface.
- Cut the strip to length with a sharp knife or heavy scissors before you remove the liner.
- Peel the liner back a little at a time and press the base down firmly along its length. Do not stretch the strip as you go.
- Fit above about 10°C if you can, and give the adhesive time to build strength before heavy use.

Frequently asked questions
What size gap does it seal?
Gaps from 3.5mm to 5.5mm. Measure with the door closed. If your gap is bigger, choose a larger profile such as our 10mm x 8mm TPE sponge D profile.
How do I fit it?
Clean and dry the surface, cut to length, peel the liner and press the base firmly in place. The adhesive is already on the strip, so no glue is needed.
Can I cut and join it?
Yes. It cuts cleanly with a sharp knife or heavy scissors. For corners you can mitre-cut the ends or simply butt two lengths together. For a continuous loop, butt the ends tightly; a dab of cyanoacrylate (superglue) on the base can help hold the joint.
Will it work outdoors?
Yes. The manufacturer states good UV and weather resistance, and it is suitable for interior and exterior use.
What temperatures can it take?
-50°C to +75°C. Above 75°C, look at our silicone seals instead.
What is it made of?
A thermoplastic elastomer (TPE): soft TPE foam for the D bulb and solid TPE for the base. TPE is rubber-like but can be recycled.
Is it food safe or WRAS approved?
No approvals are stated for this profile, so we do not offer it for food-contact or drinking-water use.
Can I buy a shorter length?
This listing is for the full 100m coil. For smaller quantities or cut lengths, contact us and we will quote.
Related profiles
- TPE Sponge D Profile 10mm x 8mm, adhesive backed, 100m coil
- TPE Sponge D Profile 25mm x 14mm, adhesive backed, 25m coil
Need help choosing a size? Call +44 1282 277786 or email sales@industrial-polymers.co.uk.
Product details
| SKU | IP-TPE-6X5.5-STD |
|---|---|
| Weight | 3.75 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Sponge Protective D Profile – 6mm x 5.5mm – 100m Coil