Rubber & FoamSKU IP-SLP-19X13X1-BLACK-10
Silicone L Profile – 19mm x 13mm, 1mm Wall – 10m or 25m Coil
Price shown updates with the option you pick.
This silicone L profile 19mm x 13mm is a slim, thin-walled rubber angle with a 1mm wall, made to sit neatly over panel edges and corners where a light, low-bulk edge trim or corner seal is wanted. It is sold per coil, 10m or 25m long, in seven colours.
At a glance
- Unequal angle: 19mm leg x 13mm leg
- Thin 1mm wall for a neat, low-profile finish
- 70 Shore A silicone - firmer than standard 60 Shore A trims
- Food-contact compliant (FDA 21 CFR 177.2600, EC 1935/2004) and WRAS approved
- Works from -50°C to +180°C; resists UV, ozone and weathering
- Black, blue, green, red, translucent, white or yellow; 10m or 25m coils
Typical uses
- Light rubber angle trim on sheet-metal, glass and acrylic panel edges
- Corner seal on enclosures, doors and HVAC housings
- Hygienic edge trim on food and drink processing equipment
- Colour-coded corner guards in cleanrooms and laboratories
- Seal strip in potable water equipment
Which one do I need?
| Profile | Best for |
|---|---|
| 17mm x 13mm, 3mm to 12mm wall | Heavy, cushioned corner protection |
| 19mm x 13mm, 1mm wall (this one) | Slim, lightweight trim over thin panel edges |
| 20mm x 13.2mm | Similar size with a sturdier wall |
| 20mm x 25mm, 1mm wall | Thin wall with a taller 25mm leg |
Technical drawing
Specification
| Profile | Unequal L / angle |
| Overall size | 19mm x 13mm |
| Wall thickness | 1mm |
| Material | Silicone rubber |
| Hardness | 70 Shore A |
| Density | 1.18 g/cm³ |
| Tensile strength | 11.3 N/mm² |
| Elongation at break | 530% |
| Tear strength | 31 N/mm |
| Operating temperature | -50°C to +180°C |
| Compliance | FDA 21 CFR 177.2600, EC 1935/2004, WRAS approved |
| Unit of sale | Coil, 10m or 25m |
How much do I need?
Add up every edge you want to trim and allow about 5% for cutting. The front and side top edges of a 1000mm x 600mm enclosure need 1.0 + 0.6 + 0.6 = 2.2m, so a 10m coil covers four enclosures and a 25m coil about eleven.
Fitting tips
- Clean and degrease the edge before fitting so the thin wall lies flat
- Cut with a sharp knife and keep cuts square for tight butt joints
- Do not stretch the trim while fitting - it will creep back and open gaps
- For a permanent or watertight fit, bond it with a silicone adhesive along both legs
Complete your project
- Silicone L Profile – 20mm x 25mm – 10m or 25m Coil
- Silicone L Profile – 20mm x 13.2mm – 10m or 25m Coil
- Silicone L Profile – 20mm x 11mm, 3.7mm to 4mm Wall – 10m or 25m Coil
Questions
Is a 1mm wall strong enough for edge protection?
It suits light knocks and finishing over sharp sheet edges. For heavy impacts choose a thicker-walled profile such as the 17mm x 13mm.
Is this rubber angle trim food safe?
Yes. The silicone meets FDA 21 CFR 177.2600 and EC 1935/2004 for food contact and is WRAS approved for drinking water.
Can it be used outdoors or in hot areas?
Yes. It resists UV, ozone and weathering and works from -50°C to +180°C.
How do I fix it?
Push it over the edge for a friction fit, or bond it with a compatible silicone adhesive for a permanent seal.
Need help choosing a profile or colour? Contact our team and we will help you pick the right size.
Product details
| SKU | IP-SLP-19X13X1-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 19mm x 13mm, 1mm Wall – 10m or 25m Coil