
Rubber & FoamSKU IP-TPEU-20X31X7-25M
TPE U Channel – Beige – 20mm x 31mm – 25m Coil – For 7mm to 8mm Panels
A thick, food-area edge protector for 7mm to 8mm panels. This beige TPE U channel is 20mm wide and 31mm tall, with a solid 13.5mm rounded base that takes knocks and covers sharp sheet edges, and long tapered lips that clamp the panel without glue. It comes as one continuous 25m coil (about £44.14 per metre inc VAT) and is held in stock in the UK.
At a glance
- Fits panels and sheet 7mm to 8mm thick: stainless, aluminium, polycarbonate, acrylic, glass
- Push-on fit: tapered lips grip the edge, no adhesive, removable for cleaning
- Beige so food residue and marks show up straight away during cleaning
- Supplier states it is approved for food contact applications
- Soft 40 Shore A TPE with a 13.5mm solid base for impact protection
- -50°C to +90°C service range (see the note in the specification)
- Cuts with a sharp knife; 100% recyclable thermoplastic
Technical drawing

Specification
| Property | Value | Basis / test method |
|---|---|---|
| Profile type | Round-based (teardrop) U channel, solid section, single slot | Supplier drawing |
| Overall width | 20 mm | Supplier drawing; ISO 3302-1 E2 |
| Overall height | 31 mm | Supplier drawing; ISO 3302-1 E2 |
| Slot width at root | 8 mm | Supplier drawing |
| Slot opening at lips | ≈ 5.2 mm (lips close in to grip) | Scaled from supplier drawing, not a stated dimension |
| Slot depth | 17.5 mm (31 mm − 13.5 mm base) | Derived from supplier dimensions |
| Base thickness | 13.5 mm at thickest point | Supplier data |
| Fits panel thickness (clamping range) | 7 mm to 8 mm | Supplier data |
| Material | Thermoplastic elastomer (TPE) | Supplier data |
| Hardness | 40° Shore A | Shore A durometer (method standard not stated by supplier) |
| Colour | Beige | Supplier product page (datasheet lists white) |
| Weight | ≈ 375 g per metre (≈ 9.4 kg per 25 m coil) | Supplier datasheet RC3250 |
| Service temperature | -50°C to +90°C | Supplier product page. The supplier datasheet quotes -25°C to +70°C; design to the narrower range for continuous duty. |
| Dimensional tolerance | ISO 3302-1 class E2 (section) / L2 (cut length) | ISO 3302-1 |
| Density, tensile strength, elongation, tear, compression set | Not published for this profile | Ask us for the compound data sheet |
| Length | 25 m continuous coil | Unit of sale |
Materials and compliance
- Food contact: the manufacturer states this profile is approved for food contact applications. The specific regulation is not named in their written data, so if you need a declaration of compliance to a particular standard for an audit, contact us before ordering.
- Recyclability: stated as 100% recyclable thermoplastic.
- No other approvals are claimed for this product.
Typical uses
- Top and side edges of guards and splash panels on food processing and packing lines
- Thick sheet-metal edges on machinery, enclosures and catering equipment
- Glazing and panel contours, display units and furniture
- Vending machine panels and edges on stairs and platforms where people may knock into them
Which U channel do I need?
| U channel | Fits panels | Best for |
|---|---|---|
| EPDM U channel 12mm x 11mm | About 4.75mm | Thin sheet edges, general trim |
| Solid EPDM U channel 17mm x 17mm | 3mm to 6mm | Medium panels, outdoor use |
| TPE U channel 20mm x 31mm, beige (this one) | 7mm to 8mm | Thick panels in food areas, heavy knocks |
| TPE U channel 20mm x 24mm | 12mm | Thicker boards and sheet |
Fitting
- Measure the panel: it must be 7mm to 8mm thick for a secure grip.
- Deburr the edge and wipe it with a grease remover so the lips bite cleanly.
- Start at one end and press the channel on by hand, working along the edge; tap stubborn sections with a rubber mallet. Do not stretch it.
- Cut a few millimetres over-length with a sharp knife and push the ends together so they butt tightly.
FAQ
What panel thickness does it fit?
Panels 7mm to 8mm thick. The slot is 8mm wide at the root and the lips close to about 5mm at the opening, so they flex apart and clamp the sheet. For 12mm sheet see the 20mm x 24mm TPE U channel; for thinner sheet choose one of the smaller channels above.
Can it be used around food?
The manufacturer states it is approved for food contact applications, and the beige colour makes contamination easy to spot. If your site needs a written declaration to a named regulation, ask us before you order.
Do I need adhesive?
No. The tapered lips hold it on the edge by grip alone, so it can be pulled off for deep cleaning and pushed back on.
What temperatures can it take?
The product page gives -50°C to +90°C; the manufacturer's datasheet gives -25°C to +70°C. For continuous use, for example next to ovens or in blast freezers, plan to the narrower -25°C to +70°C range.
How do I cut and join it?
Cut it square with a sharp knife or blade cutter. Butt the ends tightly; for corners, either mitre-cut at 45° or notch the lips so the channel bends round. It is a thermoplastic, so ends can be heat-welded if you have the equipment, but most users simply butt-join.
What is it made of and how hard is it?
Thermoplastic elastomer (TPE) at 40° Shore A: soft and flexible, so it follows gentle curves and cushions impacts, and resists chemicals, flexing and abrasion.
How much do I get?
One continuous 25m coil, weighing about 9.4kg. That works out at about £44.14 per metre including VAT.
Is it in stock?
Yes. It is held in stock and dispatched as shown on this page.
Complete your project
- TPE U Channel – 20mm x 24mm for 12mm Panels – 25m Coil
- Solid EPDM U Channel – 17mm x 17mm – Fits 3mm to 6mm Panels
- EPDM U Channel – Black – 12mm x 11mm – For 4.75mm Panels
- Silicone Round U Channel – 20.5mm x 20.2mm – Roll
Need help choosing the right profile? Call +44 1282 277786, email sales@industrial-polymers.co.uk or contact our team.
Product details
| SKU | IP-TPEU-20X31X7-25M |
|---|---|
| Weight | 20.72 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE U Channel – Beige – 20mm x 31mm – 25m Coil – For 7mm to 8mm Panels