
Rubber & FoamSKU IP-TPEUC-46X43-STD
TPE Square U Channel – 46mm x 43mm – 25m Coil
This TPE square U channel 46mm x 43mm is a large, heavy-duty edge protector for 40mm thick panels, boards and worktops: its inward-sloping legs spring open as you push it on and then clamp the edge, so it holds without adhesive. It is sold as one continuous 25m coil.
At a glance
- Square U profile, 46mm wide x 43mm high
- Made to fit 40mm thick edges
- Tapered legs clamp the edge with no glue
- Flexible TPE, 60 Shore A, 3mm wall
- Weather, UV and chemical resistant, -40°C to +90°C
- 225g per metre; 25m coil, removable and reusable
Typical uses
- Edge protector for 40mm worktops, benches and board edges
- Capping thick timber, MDF or composite panels on shopfitting and display work
- Bump strip on 40mm guarding, partitions and machine bases
- Protective edging on steps, platforms and running boards
- Temporary edge protection during site work, removed afterwards
Which one do I need?
Choose by the thickness of the edge you are capping:
| Profile | Suits |
|---|---|
| Beige TPE U 20mm x 31mm | 7mm to 8mm panels |
| TPE square U 22mm x 12mm | 8mm to 10mm panels |
| TPE square U 46mm x 43mm (this item) | 40mm boards, worktops and thick panels |
Technical drawing
Specification
| Material | TPE (thermoplastic elastomer) |
| Colour | Black |
| External size | 46mm wide x 43mm high |
| To fit panel | 40mm only |
| Wall thickness | 3mm |
| Hardness | 60 Shore A |
| Tensile strength | 9 MPa |
| Temperature range | -40°C to +90°C |
| Weight | 225g per metre |
| Unit of sale | 25m coil |
How much do I need?
Add up the edges to be capped and allow a little for trimming. Example: ten 40mm worktop fronts each 1.8m long need 18m, so one 25m coil covers them with 7m spare. For a 2.4m x 1.2m board edged on all four sides, one perimeter is 7.2m, so a coil does three boards.
Fitting tips
- Check the edge really is 40mm thick: the clamp is designed for that size and will not grip thinner material securely.
- Start at one end and press the channel down progressively along the edge until it is fully seated.
- Cut with sharp shears or a fine-toothed saw for a square end; mitre the ends at corners for a neat finish.
- It can be pulled off and refitted, which makes it handy for temporary protection during works.
Complete your project
- TPE Square U Channel Edge Trim – 22mm x 12mm for 8–10mm Panels – 25m Coil
- TPE U Channel – Beige – 20mm x 31mm – For 7mm to 8mm Panels
- TPE Edge Protector – 33mm x 45mm Black/Yellow – Pack of 10
Questions
Do I need adhesive?
No. The inward-sloping legs clamp a 40mm edge firmly, so it can be fitted, removed and reused.
Will it fit a 30mm or 36mm board?
It is designed for 40mm only; on thinner material it will not grip securely.
Can it be used outdoors?
Yes, the TPE resists weather, UV and many chemicals, and stays flexible from -40°C to +90°C.
Is the material recyclable?
Yes, TPE is fully recyclable.
Need help choosing? Contact our technical team with your panel thickness or application and we will point you to the right profile.
Product details
| SKU | IP-TPEUC-46X43-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Square U Channel – 46mm x 43mm – 25m Coil