
Rubber & FoamSKU IP-TPEU-9X16X5-STD
TPE Square U Channel – 9mm x 16mm for 5mm Panels – 25m Coil
A tall, slim black TPE square U channel that pushes over the edge of 5mm panels. Its 14mm-deep slot grips well down each face, so it holds by friction on sheet metal guards, glass, acrylic and board without needing adhesive in most jobs. Flat 9mm top, square 2mm walls, sold as one continuous 25m coil and dispatched from UK stock.
At a glance
- Fits panels and sheets 5mm thick
- 9.0mm wide x 16.0mm high overall, taller than it is wide
- 5.0mm slot, 14.0mm deep: a long grip on both faces
- Uniform 2.0mm walls and 2.0mm base for even stiffness
- Thermoplastic elastomer (TPE), 60 Shore A, black
- 70 g per metre; one 25m coil weighs about 1.75kg
- Recyclable TPE; cuts cleanly with a sharp knife
- £17.76 per metre inc VAT when bought as a 25m coil
Typical uses
- Covering cut edges on 5mm steel and aluminium machine guards and enclosures
- Edge protection for 5mm glass, acrylic and polycarbonate panels
- Finishing shopfitting panels, display boards and furniture edges
- Vending machine and kiosk panel edges
- Step, stair-nosing and running-board edges
Technical drawing

Which size do I need?
| Profile | Fits panel | Slot depth | Choose it when |
|---|---|---|---|
| 8 x 12mm | 4mm | 10mm | Your sheet is 4mm thick |
| 9 x 16mm (this item) | 5mm | 14mm | 5mm sheet, and you want a deep grip with a slim 9mm face |
| 9 x 11.5mm | 6mm | see listing | 6mm sheet with a low, slim trim |
| 12 x 14mm | 6mm | see listing | 6mm sheet with heavier walls |
Specification
| Property | Value | Test method / source |
|---|---|---|
| Profile | Square U channel (edge protector) | Supplier datasheet |
| Overall width | 9.0mm | Datasheet drawing, nominal |
| Overall height | 16.0mm | Datasheet drawing, nominal |
| Slot (channel) width | 5.0mm | Datasheet drawing, nominal |
| Slot depth / gripping arm length | 14.0mm | Supplier product data, nominal |
| Wall thickness (each side) | 2.0mm | Datasheet drawing, nominal |
| Base thickness under slot | 2.0mm | Datasheet drawing, nominal |
| Panel / edge thickness it fits (clamping range) | 5mm to 5mm | Supplier datasheet |
| Material | Thermoplastic elastomer (TPE) | Supplier datasheet |
| Hardness | 60 Shore A | Shore A durometer (supplier datasheet) |
| Colour | Black | Supplier datasheet |
| Use temperature | -25°C to +70°C | Supplier datasheet (the supplier's web page quotes -40°C to +90°C; we list the more cautious datasheet figure) |
| Weight | 70 g/m (about 1.75kg per 25m coil) | Supplier datasheet |
| Dimensional tolerance | ISO 3302-1, class E2 (cross-section) / L2 (length) | ISO 3302-1 |
| Length | 25m continuous coil | - |
| Density, tensile strength, elongation, tear strength, compression set | Not published for this profile | Ask us if your specification needs them |
All dimensions are nominal. Extruded rubber profiles vary within the tolerance class above.
Material and compliance
Made from thermoplastic elastomer (TPE), a rubber-like material that can be re-melted and recycled. The supplier describes it as having good resistance to weathering, UV, ageing and chemicals, good tear and abrasion resistance and good flex-fatigue resistance, so it suits indoor and outdoor use.
Approvals: no food-contact (FDA, EC 1935/2004), WRAS, REACH, RoHS or fire-rating approval is stated for this profile. Do not use it where a certified material is required; contact us and we will suggest an approved alternative.
How much do I need?
Add up the length of every edge to be covered, add about 5% for corners and offcuts, then divide by 25. Example: eight guard panels of 1.0 x 0.6m have 25.6m of perimeter; plus 5% is 26.9m, so order two coils.
Fitting tips
- Measure the panel first: this channel is made for 5mm. A thinner sheet will grip less; a thicker one will splay the arms.
- De-burr the edge and wipe it with a degreaser so the arms bite cleanly.
- Start at one end and press the channel on by hand, or tap it home with a rubber mallet.
- Mitre at sharp corners; it follows gentle curves without cutting.
- For heavy vibration, run a thin bead of contact adhesive in the slot.
Questions
What panel thickness does it fit?
5mm. The slot is 5.0mm wide and 14.0mm deep. For 4mm sheet choose the 8 x 12mm channel; for 6mm sheet choose the 9 x 11.5mm or 12 x 14mm.
How do I fit it?
Clean and de-burr the edge, then push the channel on by hand from one end, or tap it home with a rubber mallet. The 14mm arms hold by friction, so no tools or fixings are needed.
Do I need adhesive?
Usually not. The deep slot gives a strong grip. Add a thin bead of contact adhesive only where there is heavy vibration or frequent knocks.
How do I cut and join it?
Cut square or mitred with a sharp trimming knife, shears or a fine-toothed saw. At corners, mitre two ends at 45° and butt them together, or cut a V-notch in the arms and bend the channel round.
What temperatures can it take?
The datasheet rates it from -25°C to +70°C. Keep it away from hot surfaces above that.
Can it be used outdoors?
Yes. TPE resists weathering, UV and ageing, so it suits outdoor guards, panels and steps.
Is it food-safe or approved for drinking water?
No approvals are stated for this profile, so do not use it where FDA, EC 1935/2004 or WRAS approval is needed.
What is the difference between square and round U channel?
A square U channel has flat sides and a flat top, giving a crisp, squared-off edge finish. A round U channel has a curved back for a softer look.
Not sure which size suits your panel? Contact us with the panel thickness, or call +44 1282 277786.
Product details
| SKU | IP-TPEU-9X16X5-STD |
|---|---|
| Weight | 4.41 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Square U Channel – 9mm x 16mm for 5mm Panels – 25m Coil