
Rubber & FoamSKU IP-TPEU-12X17X3-WHITE
TPE U Channel – 12mm x 17mm for 3mm to 5mm Panels – 25m Coil
Price shown updates with the option you pick.
A push-on TPE U channel edge protector, 12mm wide x 17mm high, for sheet metal, glass and fabricated panels 3mm to 5mm thick. Two pairs of angled gripping fins hold it on without adhesive, and a solid 4mm rounded crown takes knocks and covers sharp edges. Sold as one 25m coil in black or white, held in stock for fast dispatch.
At a glance
- 12.0mm x 17.0mm U channel for 3mm to 5mm edges
- Solid 4mm crown at the thickest point for impact protection
- Tapered body, widest at the crown, with inward fins that bite on both faces of the panel
- Measured grip: 19N (3mm), 24N (4mm) and 31N (5mm) per 10cm at 20°C
- Thermoplastic elastomer: flexes without fatiguing, good tear, abrasion and chemical resistance, recyclable
- Working range -25°C to +70°C
- Removable and reusable; cuts with a sharp knife or shears
Technical drawing


Specifications
| Property | Value | Source / test method |
|---|---|---|
| Overall width (at crown) | 12.0 mm | Manufacturer's profile drawing |
| Overall height | 17.0 mm | Manufacturer's profile drawing |
| Crown thickness (thickest point) | 4.0 mm | Manufacturer's profile drawing |
| Width across lips | approx. 6.5 mm | Scaled from the drawing, not a stated dimension |
| Clamping range (panel / edge thickness) | 3 mm to 5 mm | Manufacturer's datasheet |
| Grip on a 3 mm edge | 19 N per 100 mm length | Manufacturer's pull-off test at 20 °C |
| Grip on a 4 mm edge | 24 N per 100 mm length | Manufacturer's pull-off test at 20 °C |
| Grip on a 5 mm edge | 31 N per 100 mm length | Manufacturer's pull-off test at 20 °C |
| Material | Thermoplastic elastomer (TPE) | Manufacturer's datasheet |
| Hardness | 60 Shore A | Shore A durometer, manufacturer's datasheet (note: the manufacturer's web page lists 90°; we quote the datasheet) |
| Working temperature | -25 °C to +70 °C | Manufacturer's datasheet |
| Weight | 110 g per metre (approx. 2.75 kg per 25 m coil) | Manufacturer's datasheet |
| Bending radius guide | 200 mm and 600 mm bends shown | Manufacturer's bending diagram; do not bend tighter than 200 mm without notching |
| Dimensional tolerance | ISO 3302-1, class E2 / L2 | ISO 3302-1 (extruded rubber tolerances) |
| Density, tensile strength, elongation, tear strength, compression set | Not published for this profile | Ask us and we will request the compound data |
| Colours | Black, white | - |
| Supplied as | One continuous 25 m coil | - |
Materials and compliance
Made from a thermoplastic elastomer (TPE), a rubber-like plastic that returns to shape after long periods of compression and flexing, so the fins keep their grip. The manufacturer states it is 100% recyclable and that profile dimensions are held to ISO 3302-1 class E2/L2.
No food-contact, WRAS, REACH, RoHS or fire-rating approvals are stated for this exact profile, so we do not claim any. If you need a certified grade, contact us before ordering.
Typical uses
- Machine guards, enclosures and cabinet panels in 3mm to 5mm sheet
- Glass and glazing panel edges
- Running boards, step plates and stair edges
- Vending machines, display units, shop fittings and furniture
- Covering sharp edges in factories, workshops and vehicles as a health and safety measure
Which size do I need?
| Panel thickness | Profile | Notes |
|---|---|---|
| 1mm to 2.5mm | TPE U channel 9mm x 13mm | Light trim for thin sheet |
| 2.5mm | TPE U channel 10mm x 21mm | Deep 16mm grip |
| 3mm to 5mm | TPE U channel 12mm x 17mm (this item) | Chunky 4mm crown, widest clamping range |
| 4mm | TPE square U channel 12mm x 16mm | Flat-sided look, 50m coil |
| 5mm | TPE U channel 12mm x 18mm | Similar width, 50m coil |
| 6mm | TPE U channel 14mm x 25mm | For thicker panels |
How much do I need?
Add up every edge you want to cover and allow a little for trimming at corners. Example: eight guard panels, each with a 1.2m top edge and two 0.8m sides, need 8 x 2.8m = 22.4m, so one 25m coil does the job with 2.6m spare. At 110g per metre a full coil weighs about 2.75kg.
Fitting
- Deburr the edge and wipe off oil or grease so the fins grip evenly.
- Start at one end and press the slot onto the edge by hand, working along the run.
- On 5mm sheet, tap it home with a rubber mallet.
- Cut to length with a sharp knife, shears or a fine-toothed saw for a square end.
Frequently asked questions
Will it fit my 4mm panel?
Yes. The clamping range is 3mm to 5mm, so 4mm sits in the middle; the manufacturer measured 24N of grip per 10cm on a 4mm edge.
Do I need glue?
No. The fins hold it on by themselves, so it can be removed and refitted. On vibrating equipment or very smooth glass, a few spots of a flexible adhesive add security.
How do I measure what size I need?
Measure the panel thickness with a caliper, including any paint or coating. If it is 3mm to 5mm, this profile fits. Thinner or thicker edges need a different size from the table above.
How do I go round corners?
It follows gentle curves; the manufacturer's bend guide shows 200mm and 600mm radii. For a sharp 90° outside corner, cut a small V-notch out of the legs so the crown bends cleanly, or cut and butt two lengths.
Can I cut and join it?
Cut it with a sharp knife or fine saw. Lengths are normally butted together tightly; TPE can be heat-welded with suitable equipment, or bonded with a cyanoacrylate made for elastomers.
Can it be used outdoors or in the cold?
Yes, within -25°C to +70°C. TPE handles weathering well. Above 70°C it can soften, so choose a silicone or EPDM trim near heat sources.
Is TPE the same as rubber?
TPE behaves like rubber, flexible and springy, but is processed like a plastic, which makes it recyclable and keeps the fins springy for longer than many low-cost PVC trims.
Black or white?
Black hides marks on industrial machinery; white suits light-coloured cabinets, displays and clean areas. White is not certified for food contact.
Need help choosing edge protection? Contact our team on +44 1282 277786 or sales@industrial-polymers.co.uk.
Product details
| SKU | IP-TPEU-12X17X3-WHITE |
|---|---|
| Weight | 6.61 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE U Channel – 12mm x 17mm for 3mm to 5mm Panels – 25m Coil