
Rubber & FoamSKU IP-TPEU-12X16X4-STD
TPE Square U Channel – 12mm x 16mm for 4mm Panels – 50m Coil
A heavy-duty, square-section U channel for capping the edges of 4mm sheet, glass and board. The profile measures 12mm wide by 16mm high, and every wall is a full 4mm thick: two 4mm side arms either side of a 4mm slot, on a 4mm solid base. That much rubber around a thin panel turns a sharp edge into a firm, cushioned bumper that soaks up knocks and spreads the load on fragile panels such as glass. The slot runs about 12mm deep, so the trim holds a wide band of each face. It is extruded from black 60 Shore A thermoplastic elastomer (TPE), supplied as one continuous 50m coil and held in stock.

At a glance
- Fits sheet, glass and panel edges 4mm thick
- 12mm wide x 16mm high, 4mm parallel slot about 12mm deep
- Extra-thick 4mm walls and base: as much rubber on each side as the panel is thick
- Deep arms grip a wide band of each face, so adhesive is rarely needed
- 60 Shore A TPE: resists UV, weathering, chemicals and repeated flexing
- 146g per metre; cuts cleanly with a knife; fully recyclable thermoplastic
- Black, 50m coil, about £13.64 per metre inc VAT
Typical uses
- Bumper edging on 4mm sheet-metal guards, doors and fabrications
- Cushioned edge on 4mm glass, mirror, acrylic and polycarbonate panels
- Vending machine, kiosk and display cabinet panels
- Running boards, step and stair-edge panels
- Furniture, shelving and shopfitting panels that take knocks
- Protecting panel edges in storage, handling and transport

Which size do I need?
Measure the thickness of the edge and match it to the slot. A square U channel should fit snugly: on a thinner panel it sits loose, on a thicker one it splays the arms. Several of our trims fit 4mm sheet; they differ in face size and how much rubber protects the edge.
| Profile | Fits panel | Choose it when |
| 8mm x 11mm | 4mm | you want a slim, light edge finish |
| 8mm x 12mm | 4mm | you want a slim edge in a shorter 25m coil |
| 8.5mm x 25mm | 4mm | you need a very deep grip on each face |
| 12mm x 16mm (this item) | 4mm | the edge takes heavy knocks or the panel is fragile: thick 4mm walls |
| 12mm x 18mm | 5mm | the panel is 5mm thick |
| 9mm x 20mm | 3mm | the panel is 3mm thick |
Specification
| Property | Value | Standard / source |
| Profile | Square U channel (parallel-sided slot, flat top and sides) | Supplier drawing |
| Overall width | 12.0 mm | Supplier drawing |
| Overall height | 16.0 mm | Supplier drawing |
| Slot width | 4.0 mm | Supplier drawing |
| Slot depth (gripping arm length) | About 12 mm (scaled from the supplier drawing; not dimensioned by the supplier) | Supplier drawing, scaled |
| Wall thickness | 4.0 mm each side | Supplier technical data and drawing |
| Base thickness (above slot) | About 4 mm (16 mm height less 12 mm slot) | Supplier drawing, scaled |
| Panel / edge thickness it fits | 4 mm (clamping range 4 mm to 4 mm) | Supplier page and datasheet |
| Material | Thermoplastic elastomer (TPE) | Supplier datasheet |
| Colour | Black | Supplier datasheet |
| Hardness | 60 Shore A | Shore A durometer (supplier datasheet) |
| Weight | 146 g per metre (about 7.3 kg per 50m coil) | Supplier datasheet |
| Use temperature | -25°C to +70°C (datasheet); the supplier's product page quotes -40°C to +90°C | Supplier datasheet / page |
| Minimum bend radius | 100, 200 or 300 mm depending on bend direction | Supplier datasheet diagram |
| Dimensional tolerance | ISO 3302-1, class E2 (cross-section) / L2 (length); datasheet: ISO 3302-1 quality level 2 | ISO 3302-1 |
| Coil length | 50 m, one continuous length | Supplier page |
| Density, tensile strength, elongation, tear, compression set | Not published for this profile | – |
Material and compliance
Thermoplastic elastomer combines the flexibility of rubber with the processing of a plastic. It springs back after being stretched or squeezed, so the arms keep their grip on the panel over time and the trim can be removed and refitted. It has good resistance to weathering, UV, chemicals, flex fatigue, tear and abrasion, and is 100% recyclable.
No food-contact, fire or other approvals (FDA, EC 1935/2004, WRAS, UL 94, REACH or RoHS) are stated for this profile, so we do not claim any. Ask us before using it where a certificate is required.

How much do I need?
Add up the length of every edge you want to cover, add about 5% for corners and offcuts, then divide by 50. For example, twenty 4mm panels each 1.2m x 0.8m have 80m of edge; with 5% added that is 84m, so two 50m coils.
Fitting tips
- Check the panel is a true 4mm: this profile relies on a snug fit to grip.
- Wipe the edge with a degreaser and de-burr it so the trim slides on and grips evenly.
- Start at one end and push the channel on by hand; tap it home with a rubber mallet if needed.
- Cut 1 to 2mm over length and push the ends together so no gap opens.
- The thick walls do not like tight bends: mitre square corners at 45° or cut a V-notch in the base.
Questions
What panel thickness does it fit?
4mm only. The supplier's datasheet gives a clamping range of 4mm to 4mm. On 3mm it will sit loose and on 5mm it will splay; choose the 9mm x 20mm (3mm) or 12mm x 18mm (5mm) channel instead.
Do I need adhesive?
Usually not. The roughly 12mm deep arms grip each face firmly. A thin bead of adhesive is only worth adding on vibrating machinery or where the trim could be pulled off.
Will it go round corners and curves?
It follows gentle curves; the datasheet gives minimum radii of 100mm, 200mm or 300mm depending on the direction of the bend. For square corners, mitre-cut the trim at 45° or cut a V-notch in the base.
How do I cut and join it?
Cut with a sharp knife, shears or a fine-toothed saw for a square end. Butt the ends together tightly; a drop of cyanoacrylate (superglue) makes a neat permanent joint.
Can it be used outdoors, and what temperatures can it take?
Yes, TPE resists UV light, weathering and many chemicals. For long-term use keep it within the datasheet range of -25°C to +70°C (the supplier's page quotes a wider -40°C to +90°C).
Why choose the 12mm x 16mm over a slimmer 4mm trim?
The 4mm walls put far more rubber between the panel edge and whatever hits it. It is the better choice for glass and other fragile panels, and for edges that take regular knocks from trolleys, people or tools.
What is TPE and how does it differ from rubber?
TPE is a thermoplastic elastomer: it behaves like a soft rubber in use but can be melted and recycled. At 60 Shore A it is firm enough to hold its square shape and soft enough to cushion knocks.
Is it suitable for glass?
Yes. It is widely used to cover the edges of 4mm glass, mirror, acrylic and polycarbonate panels, protecting both the panel and the people handling it.
How quickly will it arrive?
This trim is held in stock and ships from our UK warehouse; see the dispatch message above the basket button for today's cut-off.
Not sure which profile suits your panel? Contact our team with the panel thickness, or call +44 1282 277786, and we will point you to the right channel.
Product details
| SKU | IP-TPEU-12X16X4-STD |
|---|---|
| Weight | 16.53 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Square U Channel – 12mm x 16mm for 4mm Panels – 50m Coil