
Rubber & FoamSKU IP-TPEUC-18X28-STD
TPE U Channel – 18mm x 28mm Heavy-Duty Edge Protector for 6.5mm Panels – 25m Coil
This black TPE U channel 18mm x 28mm is a heavy-duty edge protector made to push onto 6.5mm thick panels, sheets and edges. It is sold as one 25m coil, which you cut to length on site.
At a glance
- Overall size 18mm wide x 28mm high, for 6.5mm edges only
- Tapered inner slot grips tightly, so no adhesive is needed and the trim can be removed and refitted
- Thick rounded bulb, 9mm at its thickest point, spreads knocks away from the edge
- 60° Shore A thermoplastic elastomer: flexible, tear- and abrasion-resistant
- Good resistance to weathering, ageing and chemicals for indoor or outdoor use
- Rubber edge trim that cuts cleanly with a sharp knife; 100% recyclable
Typical uses
- Capping sharp sheet metal edges on machine guards, cabinets and enclosures
- Protecting the edges of 6.5mm glazing and glass contours
- Impact edging for running boards and stair nosings
- Bump protection on vending machines, display units and furniture edges
Which one do I need?
Choose by the thickness of the edge you are covering. This 18mm x 28mm profile has the thickest bulb, for edges that take real knocks.
| Profile | Overall size | Fits panel | Best for |
|---|---|---|---|
| TPE U channel 11.5mm x 21mm | 11.5 x 21mm | 5mm to 5.5mm | Lighter panels and cabinet doors |
| TPE U channel 16mm x 21mm | 16 x 21mm | 5mm to 8mm | General guarding with a range of panel sizes |
| TPE U channel 18mm x 28mm | 18 x 28mm | 6.5mm only | Heavy knocks: running boards, stairs, vending machines |
| TPE square U channel 16mm x 18mm | 16 x 18mm | 10mm | Thicker boards with a squarer finish |
Technical drawing
Specification
| Material | Thermoplastic elastomer (TPE) |
| Colour | Black |
| Overall size | 18mm wide x 28mm high |
| To fit panel | 6.5mm only |
| Bulb thickness | 9mm at the thickest point |
| Hardness | 60° Shore A |
| Working temperature | -25°C to +70°C |
| Tolerance class | ISO 3302-1 E2 – L2 |
| Unit of sale | One 25m coil |
How much do I need?
Measure every edge you want to cover and add about 5% for trimming at corners and ends. Example: a guard with four 1.2m top rails and two 2m side panels needs 4 x 1.2m + 2 x 2m = 8.8m, plus 5% = about 9.3m, so one 25m coil is plenty.
Fitting tips
- Deburr and clean the 6.5mm edge first so the slot seats fully and grips evenly.
- Start at one end and press the channel on with your thumbs, working along the length; a rubber mallet helps on long runs.
- On outside corners, cut a small V-notch out of the slot side so the bulb bends round without kinking.
- Cut square with a sharp knife or fine-toothed saw and butt joints tightly for a neat finish.
Complete your project
- TPE U Channel – 16mm x 21mm for 5mm to 8mm Panels
- TPE U Channel – 12mm x 17mm for 3mm to 5mm Panels
- TPE Square U Channel – 16mm x 18mm for 10mm Panels
Questions
Do I need adhesive to fit this U channel?
No. The tapered slot grips a 6.5mm edge tightly enough for most jobs, and leaving out adhesive means the edge protector can be taken off and reused.
Will it fit a 5mm or 8mm panel?
It is made for 6.5mm edges only. On thinner panels it will be loose, and thicker ones will not seat. For 5mm to 8mm edges choose our 16mm x 21mm TPE U channel.
Can this rubber edge trim be used outdoors?
Yes. TPE resists weathering, ageing and many chemicals, so it suits outdoor running boards, stairs and machinery.
How do I cut it?
Use a sharp utility knife or fine-toothed saw. Cut square and butt the ends together for a tidy joint.
Not sure which size fits your panel? Contact our team with the panel thickness and we will point you to the right profile.
Product details
| SKU | IP-TPEUC-18X28-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE U Channel – 18mm x 28mm Heavy-Duty Edge Protector for 6.5mm Panels – 25m Coil