
Rubber & FoamSKU IP-WHS-35X20-STD
Watertight Hatch Seal – Composite NR/SBR – 35mm x 20mm – 10m Roll
This heavy-duty watertight hatch seal is designed to provide secure, weather-resistant closures for marine vessels and industrial access doors. It is supplied as a continuous 10m roll, ready to be cut and fitted to your exact requirements.
At a glance
- Composite construction with a solid outer skin and sponge core
- Outer skin manufactured from a durable Natural Rubber and SBR blend
- Highly compressible open-cell natural rubber sponge core
- Provides excellent resistance to ozone and weathering
- Measures 35mm wide by 20mm thick
- Supplied as a 10m roll for continuous sealing
Typical uses
- Sealing cargo covers and ullage plugs on commercial vessels
- Weatherproofing access doors and skylights on marine craft
- Watertight closures for naval ships, ferries, and cruise liners
- Heavy-duty sealing on oil, gas, and chemical tankers
Technical drawing
Specification
| Profile size | 35mm wide, 20mm thick |
| Outer skin material | Natural Rubber / SBR blend |
| Inner core material | Open-cell Natural Rubber sponge |
| Hardness (Outer skin) | 67° Shore A |
| Operating temperature | -20°C to 120°C |
| Tensile strength | 4MPa (outer skin), 295kPa (sponge) |
| Weight | 0.75kg per metre |
How much do I need?
To calculate the required length, measure the complete perimeter of the hatch or door you intend to seal. For example, a rectangular access hatch measuring 1.5m by 1m has a total perimeter of 5m. A single 10m roll will provide enough material to seal two hatches of this size. Always allow a small amount of extra length to ensure a tight, compression-fit butt joint.
Fitting tips
- Ensure the mounting channel or surface is completely clean, dry, and free from old adhesive or debris before installation.
- Do not stretch the seal during fitting, as it will slowly retract over time and cause gaps at the joints.
- Cut the ends slightly longer than measured to create a tight, compressed butt joint for maximum water resistance.
- Use a suitable marine-grade rubber adhesive if bonding the seal directly to a flat surface.
Complete your project
- Watertight Hatch Seal – Composite NR/SBR – 30mm x 25mm – 10m Roll
- Composite Rubber Watertight Hatch Seal – 38mm x 25mm – 10m Roll
- Watertight Hatch Seal – Composite NR/SBR – 50mm x 25mm – 10m Strip
Questions
What is the advantage of the composite construction?
The open-cell natural rubber sponge core allows the seal to compress easily when the hatch is closed, while the solid NR/SBR outer skin provides robust protection against wear, weathering, and ozone.
Can this seal withstand extreme temperatures?
Yes, the materials are rated to perform in environments ranging from -20°C up to 120°C, making them highly suitable for exposed marine and industrial applications.
How heavy is the seal?
The profile weighs approximately 0.75kg per metre, meaning a full 10m roll weighs around 7.5kg.
Is this suitable for continuous submersion?
While designed to provide a watertight seal against rain, spray, and washdown, the open-cell core means it relies on the solid outer skin and proper compression to maintain a barrier. It is intended for hatches and doors rather than deep underwater submersion.
For further assistance with selecting the correct profile, please contact our team.
Product details
| SKU | IP-WHS-35X20-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Watertight Hatch Seal – Composite NR/SBR – 35mm x 20mm – 10m Roll