
Rubber & FoamSKU IP-HATCH-30X25-STD
Watertight Hatch Seal – Composite NR/SBR – 30mm x 25mm – 10m Roll
This 30mm x 25mm watertight hatch seal is designed to provide a secure, compressible barrier for marine doors, cargo covers and access hatches. Supplied as a 10m roll, it features a dual-material construction that balances flexibility with durability for demanding maritime environments.
At a glance
- 30mm wide by 25mm thick profile
- Supplied as a continuous 10m roll
- Natural rubber sponge core for high compressibility
- Solid NR/SBR outer skin for strength and protection
- Operating temperature range of -20°C to 120°C
- Provides a watertight seal against the elements
Typical uses
- Sealing cargo covers and access doors on commercial vessels
- Weatherproofing skylights and ullage plugs
- Maintenance on naval ships, cruise liners and ferries
- Sealing hatches on oil, gas and chemical tankers
Technical drawing
Specification
| Profile size | 30mm x 25mm |
| Roll length | 10m |
| Outer skin material | Natural rubber / SBR blend |
| Inner core material | Natural rubber sponge |
| Colour | Black |
| Hardness (Shore A) | 67° |
| Tensile strength | 4MPa (outer skin), 295kPa (sponge) |
| Elongation at break | 200% (outer skin), 140% (sponge) |
| Compression set | 15% – 22 hours @ 70°C (outer skin) |
| Compression deflection | 25% – 5-9PSI (sponge) |
| Minimum temperature | -20°C |
| Maximum temperature | 120°C |
| Weight | 0.7kg per metre |
Installation and care
Ensure the mounting surface is clean, dry and free from grease or old adhesive before fitting. The seal should be seated firmly into the channel or against the mating surface, taking care not to stretch the rubber during installation, as this can cause it to pull back over time.
Fitting tips
- Cut the seal slightly longer than required to allow for natural shrinkage.
- Use a suitable marine-grade adhesive if the seal is not being fitted into a retaining channel.
- Avoid sharp bends that could kink the solid outer skin and compromise the watertight seal.
- Check the compression when the hatch is closed; the sponge core should compress without crushing the solid skin.
Complete your project
- Watertight Hatch Seal – Composite NR/SBR – 35mm x 20mm – 10m Roll
- Composite Rubber Watertight Hatch Seal – 38mm x 25mm – 10m Roll
- Watertight Hatch Seal – Composite NR/SBR – 50mm x 25mm – 10m Strip
Questions
Is this seal suitable for continuous submersion?
It is designed as a watertight hatch seal to protect against weather and washdown, rather than for continuous deep-water submersion.
Can I cut the 10m roll to size?
Yes, the composite NR/SBR material can be cut to your required lengths using heavy-duty shears or a sharp utility knife.
Why does it have a sponge core?
The natural rubber sponge core allows the seal to compress easily when a heavy hatch is dogged down, while the solid outer skin protects the core from damage and weathering.
What is the maximum temperature this seal can handle?
The seal is rated for use in temperatures up to 120°C.
If you need further advice on selecting the right marine seal for your vessel, please contact our team.
Product details
| SKU | IP-HATCH-30X25-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Watertight Hatch Seal – Composite NR/SBR – 30mm x 25mm – 10m Roll