
Rubber & FoamSKU IP-HSEA-38X25-STD
Composite Rubber Watertight Hatch Seal – 38mm x 25mm – 10m Roll
This composite rubber watertight hatch seal is designed to provide a secure, watertight closure for doors, hatches and covers on marine vessels. It features a highly compressible natural rubber sponge core encased in a tough, solid NR/SBR rubber skin. It is supplied as a 10m roll.
At a glance
- Solid NR/SBR rubber outer skin for strength and protection
- Compressible natural rubber open-cell sponge core
- Chamfered corners to prevent catching and seal damage
- Good resistance to ozone and weathering
- Operating temperature range from -20°C to 120°C
- 38mm wide by 25mm thick
Typical uses
- Cargo covers and access doors on marine vessels
- Skylights and ullage plugs
- Naval ships, cruise ships and ferry lines
- Oil, gas and chemical tankers
Technical drawing
Specification
| Material (outer skin) | Natural rubber / SBR |
| Material (inner core) | Natural rubber open-cell sponge |
| Size | 38mm x 25mm |
| Length | 10m |
| Colour | Black |
| Hardness (Shore A) | 67° |
| Tensile strength | 4MPa (outer skin), 295kPa (sponge) |
| Compression set | 15% – 22 hours @ 70°C (outer skin) |
| Compression deflection | 25% – 5-9PSI (sponge) |
| Elongation at break | 200% (outer skin), 140% (sponge) |
| Minimum temperature | -20°C |
| Maximum temperature | 120°C |
| Weight | 0.9kg per metre |
Installation and care
The chamfered edges of this seal are designed to assist with installation and prevent the seal from catching in openings, helping to preserve its lifespan. Ensure the mounting surface is clean, dry and free from grease or debris before fitting. The seal can be bonded into place using a suitable marine-grade contact adhesive.
Fitting tips
- Clean the channel or mounting surface thoroughly before applying adhesive.
- Do not stretch the seal during installation, as it will shrink back over time.
- Cut the ends slightly long and compress them together for a tight butt joint.
- Ensure the chamfered edge faces the correct way to clear the closing hatch.
Complete your project
- Watertight Hatch Seal – Composite NR/SBR – 50mm x 25mm – 10m Strip
- Watertight Hatch Seal – Composite NR/SBR – 35mm x 20mm – 10m Roll
- Watertight Hatch Seal – Composite NR/SBR – 30mm x 25mm – 10m Roll
Questions
Is this seal suitable for continuous submersion?
It is designed as a watertight seal for hatches and doors against weather and spray, rather than for continuous deep-water submersion.
Can I cut this seal to size?
Yes, the composite rubber can be cut using a sharp utility knife or heavy-duty shears.
What adhesive should I use?
A high-quality neoprene or contact adhesive suitable for marine environments is recommended.
Does the sponge core absorb water?
The core is an open-cell sponge, which is why it is encased in a solid rubber skin to provide the waterproofing while maintaining high compressibility.
Need help choosing the right profile? Contact our team for advice.
Product details
| SKU | IP-HSEA-38X25-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Composite Rubber Watertight Hatch Seal – 38mm x 25mm – 10m Roll