
Rubber & FoamSKU IP-WHS-38X30-STD
Watertight Hatch Seal – 38mm x 30mm – 10m Length
This watertight hatch seal 38mm x 30mm is a composite marine seal with a soft open cell natural rubber sponge core inside a tough solid NR/SBR skin, made for cargo covers, access doors and skylight hatches. It is sold as one 10m length.
At a glance
- 38mm wide x 30mm high rectangular section with chamfered top edges
- Open cell sponge core for easy compression and low closing force
- Solid NR/SBR outer skin protects the core and resists wear
- 60–70° Shore A skin, 4MPa tensile strength
- Compression set 15% maximum
- Weighs 1.1kg per metre – supplied as a 10m length
Typical uses
- Cargo hatch covers and deck access hatches
- Watertight and weathertight doors on vessels
- Skylights and ullage plugs
- Hatches on ferries, workboats and tankers
- Heavy covers on industrial tanks and enclosures
Which one do I need?
| Hatch seal | Best for |
|---|---|
| 35mm x 25mm | Narrower channels, choice of lengths |
| 40mm x 20mm | Wide, shallow channels |
| 38mm x 30mm (this product) | Standard 38mm channels needing a deeper seal |
| 38mm x 38mm | The same width with a square, taller section |
| 50mm x 25mm | Wide channels on larger hatches |
Technical drawing
Specification
| Section | 38mm x 30mm, chamfered top edges |
| Outer skin | Solid natural rubber / SBR blend |
| Core | Open cell natural rubber sponge |
| Hardness | 60–70° Shore A |
| Tensile strength | 4MPa |
| Compression set | 15% maximum |
| Colour | Black |
| Weight | 1.1kg per metre |
| Unit of sale | One 10m length |
How much do I need?
Measure the full perimeter of the hatch channel. Example: a 2m x 1.5m hatch has a 7m perimeter (2 + 2 + 1.5 + 1.5), so one 10m length seals it with 3m to spare. Two hatches of this size need two lengths.
Fitting tips
- Clean old adhesive and debris out of the channel before fitting.
- Seat the seal with the chamfered edges facing the lid so it does not catch as the hatch closes.
- Do not stretch the strip into the channel – it will shrink back and open the joints.
- Cut ends square with a sharp blade and butt them tightly, ideally at the middle of a straight side.
Complete your project
- Watertight Hatch Seal – 38mm x 38mm – 10m Length
- Watertight Hatch Seal – 35mm x 25mm – 10m to 25m Lengths
- Watertight Hatch Seal – Composite NR/SBR – 50mm x 25mm – 10m Strip
Questions
What is this hatch seal made of?
A solid NR/SBR rubber skin around an open cell natural rubber sponge core.
Why an open cell core?
Open cell sponge compresses more easily, so the hatch closes with less force. A closed cell core gives slightly better water resistance on its own, which is why the solid skin is there to protect it.
Can it be used outdoors and at sea?
Yes. It is made for exposed marine hatches, cargo covers and skylights.
Does it need adhesive?
That depends on the channel. Many channels hold the seal by friction; use a marine-grade contact adhesive where it must stay put.
How is it supplied?
As one continuous 10m length, cut to fit on site.
Not sure which size or grade suits your application? Contact our team and we will help you choose.
Product details
| SKU | IP-WHS-38X30-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Watertight Hatch Seal – 38mm x 30mm – 10m Length