
Rubber & FoamSKU IP-WHS-35X25-10
Watertight Hatch Seal – 35mm x 25mm – 10m to 25m Lengths
Price shown updates with the option you pick.
This black hatch seal 35mm x 25mm is a composite EPDM marine seal with a closed-cell sponge core inside a solid rubber skin, sold in 10m, 15m or 25m strip lengths. It sits in the rim channel of hatches, access doors and cargo covers, where the soft core compresses under the closing lid to make a watertight seal.
At a glance
- Watertight hatch seal: 35mm wide x 25mm high, rectangular section
- Solid EPDM outer skin, 67 Shore A, protects the soft core from wear
- Closed-cell EPDM sponge core: water cannot travel through it
- Chamfered top corners help it seat in the channel without snagging
- EPDM resists ozone, sea air and weathering
- Black, cut to 10m, 15m or 25m lengths
Typical uses
- Cargo hatch covers and ullage plugs
- Watertight access doors and deck hatches
- Skylight and companionway seals
- Inspection covers on tankers, ferries and workboats
Which one do I need?
| Hatch seal size | Best for |
|---|---|
| 30mm x 25mm | Narrower channels with the same depth |
| 35mm x 20mm | 35mm channels that are shallower |
| 35mm x 25mm (this product) | 35mm wide channels about 20mm deep |
| 38mm x 25mm | Slightly wider 38mm channels |
| 38mm x 38mm | Deep channels and heavy covers |
Technical drawing
Specification
| Profile | Rectangular with chamfered top corners |
| Size | 35mm wide x 25mm high |
| Outer skin | Solid EPDM rubber |
| Core | Closed-cell EPDM sponge |
| Hardness (skin) | 67 Shore A |
| Tensile strength | 7.72 MPa skin, 2.8 MPa sponge |
| Compression set (skin) | 25.1% |
| Compression deflection (sponge) | 12.1 kPa |
| Colour | Black |
| Unit of sale | One strip of 10m, 15m or 25m |
How much do I need?
Measure round the centre of the hatch channel and add about 5% for trimming the joint. Example: a hatch 1.5m x 2m has a 7m perimeter, plus 5% = 7.4m, so one 10m length of the 35mm x 25mm hatch seal fits it; two such hatches need 14.7m, so choose 15m.
Fitting tips
- Clean old adhesive and rust from the channel before fitting the new seal.
- Press the seal in without stretching it, or it will shrink back and open a gap at the joint.
- Put the joint away from the hinges and cut both ends square for a tight butt.
- Bond the joint and the channel base with a suitable rubber adhesive for a watertight result.
Complete your project
- Composite Rubber Watertight Hatch Seal – 38mm x 25mm – 10m Roll
- Watertight Hatch Seal – Composite NR/SBR – 35mm x 20mm – 10m Roll
- Watertight Hatch Seal – 38mm x 38mm – 10m Length
Questions
What is the 35mm x 25mm hatch seal made of?
A solid EPDM rubber skin around a closed-cell EPDM sponge core. The skin gives strength and wear resistance; the sponge gives easy compression.
Why a closed-cell sponge core?
The cells are sealed from each other, so water cannot soak along the core even when the seal is compressed.
Will it fit my hatch channel?
It suits channels about 35mm wide. Measure the channel width and depth; for a 38mm channel choose the 38mm x 25mm seal.
Can I join the ends?
Yes. Cut both ends square, butt them tightly and bond with a rubber adhesive, placing the joint away from the hinges.
Not sure which size you need? Contact our team and we will be glad to help.
Product details
| SKU | IP-WHS-35X25-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Watertight Hatch Seal – 35mm x 25mm – 10m to 25m Lengths