
Rubber & FoamSKU IP-WHS-40X20-5
Watertight Hatch Seal – 40mm x 20mm – 5m to 25m Lengths
Price shown updates with the option you pick.
This watertight hatch seal 40mm x 20mm combines a solid EPDM rubber skin with a closed-cell EPDM sponge core, giving a soft, water-tight compression seal for hatch covers, access doors and skylights on work boats and ships. Choose a 5m, 10m, 15m or 25m strip length.
At a glance
- 40mm wide by 20mm high rectangular section with chamfered edges
- Closed-cell EPDM sponge core that does not soak up water
- Solid EPDM outer skin, 67 Shore A, protects the core from wear
- Chamfers help it seat in the channel and stop it snagging
- Weighs about 0.67kg per metre
- Four strip lengths: 5m, 10m, 15m and 25m
Typical uses
- Cargo hatch covers and deck access hatches
- Watertight doors and bulkhead access panels
- Skylights and ullage plug covers
- Weathertight covers on workboats, ferries and tankers
- Retrofit replacement of worn hatch packing
Which one do I need?
Match the seal to the width of the retaining channel on your hatch and the compression your lid gives.
| Size | Best for |
|---|---|
| 35mm x 25mm | Narrower channels where a deeper, taller seal is needed |
| 40mm x 20mm (this product) | Wider, shallower channels and lighter lids that compress a lower seal |
| 38mm x 38mm | Deep square channels on heavy hatch covers |
Technical drawing
Specification
| Outer skin | Solid EPDM rubber |
| Core | Closed-cell EPDM sponge |
| Size | 40mm x 20mm |
| Hardness (skin) | 67° Shore A |
| Tensile strength | 7.72 MPa skin, 2.8 MPa sponge |
| Compression set (skin) | 25.1% |
| Compression deflection (sponge) | 12.1 kPa |
| Weight | 0.67kg per metre |
| Colour | Black |
| Strip lengths | 5m, 10m, 15m or 25m |
How much do I need?
Measure the full length of the hatch channel and add about 5% for trimming the joint. Example: a 1.5m by 1.2m hatch has a 5.4m perimeter; adding 5% gives 5.7m, so the 10m strip is the right choice and avoids a second joint.
Fitting tips
- Clean old adhesive, rust and paint flakes out of the channel before fitting
- Seat the seal with the chamfered edges facing the lid so it enters the channel cleanly
- Lay it in without stretching and make one tight butt joint, ideally away from the hinge side
- Bond with a marine-grade contact adhesive if the channel does not grip the seal on its own
Complete your project
- Watertight Hatch Seal – 35mm x 25mm
- Watertight Hatch Seal – 38mm x 38mm – 10m Length
- EPDM P Extrusion – 32.5mm x 18mm – Cut to Length
Questions
Why does the sponge core matter?
The core is closed-cell EPDM, so the tiny cells are sealed from each other and water cannot travel through it, while it still compresses easily under the lid.
Which strip length should I buy?
Measure the channel perimeter, add about 5% and choose the next length up so you only need one joint.
Does it need adhesive?
In a tight retaining channel it often holds by friction; use a marine contact adhesive where the channel is worn or open.
Is it suitable outdoors?
Yes. The EPDM skin is designed for exposed marine use on deck.
Not sure which profile suits your application? Contact our team with your gap size and working conditions and we will help you choose.
Product details
| SKU | IP-WHS-40X20-5 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Watertight Hatch Seal – 40mm x 20mm – 5m to 25m Lengths