Rubber & FoamSKU IP-SSS-8MM-8W-PLAIN
Silicone Sponge Rubber Strip – 8mm Thick, White – 25m Roll
Price shown updates with the option you pick.
This white silicone sponge strip 8mm thick is a soft, skinned sealing strip for enclosures, light fittings and hot equipment, sold as a continuous 25m roll in a choice of five widths, plain or self-adhesive.
At a glance
- 8mm thick medium-density silicone sponge, 250 kg/m³, in white
- Extruded with a smooth skin on all four faces, so cut edges never expose open cells along the length
- Five widths: 8mm, 10mm, 15mm, 20mm and 25mm
- Plain back for channels and your own adhesive, or self-adhesive for peel-and-stick fitting
- Works from -60°C to +230°C, with short peaks to +250°C
- WRAS approved for potable water up to 85°C and flame retardant to FAR 25 and FMVSS302
Typical uses
- Door gaskets on electrical enclosures and control cabinets, helping seal to IP65
- Weather seals behind exterior light fittings and housings
- Compression gaskets on oven, dryer and heat-treatment equipment doors
- Soft gap filler and anti-vibration pad under covers and panels
Which one do I need?
| Choice | Pick it when |
|---|---|
| 8mm or 10mm wide | Narrow door returns and enclosure flanges where the strip forms a near-square section |
| 15mm or 20mm wide | Wider flanges and lids that need more bearing area for an even seal |
| 25mm wide | Broad faces, gap filling and anti-vibration pads |
| Plain back | Fitting into a retaining channel, or bonding with a silicone adhesive for hot service |
| Self-adhesive back | Fast peel-and-stick fitting to clean, flat metal or painted surfaces |
| Thinner strip | Small gaps: see our 5mm and 6mm strips |
| Thicker strip | Larger or uneven gaps: see our 10mm strip |
Technical drawing
Specification
| Material | Silicone sponge, extruded with skin on all sides |
| Colour | White |
| Thickness | 8mm |
| Widths | 8mm, 10mm, 15mm, 20mm, 25mm |
| Backing | Plain or self-adhesive |
| Unit of sale | One continuous 25m roll |
| Density | 250 kg/m³ |
| Hardness | 47 Shore OO (about 5 Shore A) |
| Temperature range | -60°C to +230°C, +250°C intermittent |
| Tensile strength | 0.6 MPa |
| Elongation at break | 150% |
| Water absorption | 0.2% |
| Approvals | WRAS (potable water to 85°C), FAR 25 and FMVSS302 flame retardancy |
How much do I need?
Measure the perimeter of each door or lid and add about 20mm per joint for a tight butt. A 600mm x 400mm enclosure door needs about 2.0m, so one 25m roll gaskets around twelve doors of that size, with spare for corners.
Fitting tips
- Clean and degrease the surface before fitting the self-adhesive version, and press it down firmly along the whole length.
- Design for around 30% compression (about 2.4mm on 8mm) for the best long-term recovery; do not exceed 50%.
- Cut square with a sharp blade and butt the ends tightly rather than stretching the strip round corners.
- For hot service above the adhesive's limit, use the plain version in a channel or with a silicone adhesive.
Complete your project
- Silicone Sponge Rubber Strip – 10mm Thick – 25m Roll
- Silicone Sponge Rubber Strip – 6mm Thick, White – 25m Roll
- Silicone Self-Grip Edge Trim – 8.9mm x 12.4mm
Questions
Can this silicone sponge strip be used outdoors?
Yes. Silicone resists UV, ozone and weathering, and the skinned strip helps enclosures seal to IP65.
Is it suitable for drinking water equipment?
Yes, the material is WRAS approved for potable water up to 85°C.
How hot can the 8mm sponge strip get?
It works continuously up to +230°C and copes with short peaks to +250°C without hardening or melting.
What does extruded with a skin mean?
The strip is made to size with a smooth closed surface on every face, unlike strip slit from sheet, so it resists dust and moisture better.
Need help choosing the right width or backing? Contact our team.
Product details
| SKU | IP-SSS-8MM-8W-PLAIN |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone Sponge Rubber Strip – 8mm Thick, White – 25m Roll