For Help or to Order over the Phone

+44 1282 277786

Free Shipping On All UK Orders

sales@industrial-polymers.co.uk

Machining & Fabrication

263 products

Showing 169 - 192 of 263 products

Our machining & fabrication range is selected for real working conditions, not catalogue filler. Everything on this page is held in UK stock and despatched from our own warehouse.

Held in UK stock for immediate despatch
Trade and volume pricing available
Technical advice from people who use this material daily
Same-day despatch on orders before 2pm

Cut-to-size and bulk pricing available on every line. Ordered before 2pm on a working day, UK stock items ship same day. Need a size that isn't listed? Contact our technical team and we will quote it.

Showing 169 - 192 of 263 products

Four white PETP billets on white, shown from different angles including one short disc stood upright

Two stout cream PETP rods laid together on white, rounded ends angled to the lower left

PETP Natural (White) Rod 90mm to 160mm dia for Gears & bushes

From £372.72 inc VAT

Thick off-white PET slab on white, deep square-cut edge along the near sides

Flat bright white PETP panel angled on a white studio ground, shallow square-sawn edge along the near side

PETP Natural (White) Sheet 10mm to 80mm thick for Wear pads & conveyor parts

From £329.26 inc VAT

Pale ivory PETP billet held in grey and black gloves, broad flat sawn face towards the camera

Three creamy white PETP rods of stepped diameter grouped on white, cut ends angled forward

PETP Rod 60mm to 80mm for Machining & Fabrication

From £166.16 inc VAT

Five pale tan phenolic rods in stepped diameters on white, grainy cut ends facing the camera

Three flecked tan phenolic bars in graded sizes on white, close-woven grain in the round ends

Phenolic Cotton Brown Rod 16mm to 50mm dia for Bearings & laminates

From £331.66 inc VAT

Four slim cream phenolic laminate bars stacked on white, close-woven grain across each cut end

Three narrow khaki-gold phenolic bars on white, thickest nearest, cut faces angled to the left

Phenolic Cotton Brown Rod 6mm to 12mm dia for Cams & bushes

From £167.04 inc VAT

Three brown phenolic cotton rods stacked at an angle on white, sawn ends showing the fabric grain

Three khaki phenolic cotton rods fanned largest to smallest on white, circular sawn ends to the left

Phenolic Cotton Brown Rod 6mm to 12mm dia for Rollers & circuit boards

From £176.02 inc VAT

Stacked tan-brown phenolic laminate sheets on white with a round disc and a cut strip

Orange-brown phenolic cotton laminate slab angled on white, matt sanded face above a paler sawn edge

Phenolic Cotton Brown Sheet 0.8mm to 1mm thick for Gears & bearings

From £571.00 inc VAT

Three square orange-brown phenolic laminate slabs stacked on white, a round disc of the same material on top

Tan phenolic cotton laminate panel angled on a white ground, smooth matt face with a pale sawn edge

Phenolic Cotton Brown Sheet 1.6mm to 4mm thick for Insulation & structural parts

From £1,044.88 inc VAT

Orange-brown laminate squares in two stacks on white beside a fan of round discs

Thin square light tan phenolic cotton laminate panel angled on white, matt face and a narrow pale edge

Phenolic Cotton Brown Sheet 1mm to 5mm thick for Wear pads & insulation

From £414.24 inc VAT

Five thick brown laminate blocks fanned on white, pale layered edges showing the build-up

Tan-brown phenolic cotton laminate slab angled on white, layered fabric plies banding the thick cut edge

Phenolic Cotton Brown Sheet 6mm thick for Laminates & insulators

£2,173.00 inc VAT

Three sandy phenolic laminate bars of differing sizes on white, woven grain in the round ends

Three speckled yellow-tan phenolic bars of stepped size on white, grainy ends towards the front

Phenolic Cotton Laminate Brown Rod 16mm to 50mm dia for Electrical components & mechanical parts

From £278.04 inc VAT

Four honey-gold phenolic bars fanned on white, smallest at the front and round ends to the right

Three mustard phenolic laminate bars stepped by size on white, dull round ends to the front

Phenolic Cotton Laminate Brown Rod 60mm to 70mm dia for Cams & bushes

From £2,350.54 inc VAT

Corner of a pale olive-green phenolic laminate sheet on white, layered fabric edge visible

Pale green laminate panel on a worn timber bench with snips, tape measure and a snap-off knife

Phenolic Laminate 10G/40 Plastic Sheet - 1.6mm To 3mm Thick

From £89.67 inc VAT

Pale tan phenolic rod gripped in a lathe chuck with a coolant nozzle, workshop machines behind

Streaky olive-tan Whale phenolic bar cropped close on white, woven layers in its round end

Phenolic Laminate Rod SRBF Cotton Fabric High Strength Insulation Bar

From £546.58 inc VAT

Grey gloves holding a thin tan laminate sheet face-on, switchgear behind and more sheets stacked below

Tan phenolic laminate slab angled on white, sanded matt face and a deep pale-edged side

Phenolic Laminate Sheet 0.8mm to 1mm Thick for Engineering

From £571.00 inc VAT

Thin orange-tan laminate sheet held in grey gloves before a control panel of busbars and fuse holders

Tan laminate panel angled on a white ground, smooth matt face with a pale sawn edge along the front

Phenolic Laminate Sheet 1.6mm to 5mm Thick for Engineering Applications

From £1,044.88 inc VAT

Clear polycarbonate sheet lying flat on a white background, thin square-cut edges catching the light

Gloved hands holding a thin clear polycarbonate sheet over a steel table in a workshop

Polycarbonate 2050mm x 1250mm Sheet 0.75mm to 1.5mm thick for Signage & glazing

From £85.18 inc VAT

Silver polycarbonate mirror screw-fixed to a plain wall, reflecting a lit corridor with pale timber doors and strip lights

Polycarbonate Mirror Sheet Silver 3mm & 6mm - 2440mm x 1220mm

From £1,080.00 inc VAT

Translucent clear polycarbonate rod held in grey gloves, frosted circular cut face towards the camera

Three translucent polycarbonate rods of different diameters on white, frosted round cut faces forward

Polycarbonate Rod 10mm to 200mm Diameter for Engineering Applications

From £14.40 inc VAT

Beige PEEK rod filling the frame at an angle on white, satin cut end face at the left

Long beige PEEK rod held in black gloves across a scratched steel bench, round cut face forward

Polyetheretherketone PEEK Rod for Aerospace & Medical Applications 5mm to 100mm diameter

From £5.48 inc VAT

Single beige square sheet angled on white, matt face and clean square edges

Square tan PEEK slab angled on a pale grey ground, matt face and a thick square-cut edge

Polyetheretherketone PEEK Sheet for Aerospace and Medical Applications 5mm to 50mm thick

From £316.48 inc VAT

Natural white polyethylene rod held in grey gloves in a machine shop, flat end face facing forward

Polyethylene rods in natural cream, black and white lined up on a white background, ends to the front

Polyethylene Rod 10mm to 50mm Diameter for Machining & Fabrication

From £12.00 inc VAT

Large milky-white polyethylene billet held in blue and grey gloves, flat sawn face angled forward

Thick off-white polyethylene billet with a black rod and a slim white rod, studio shot on white

Polyethylene Rod 200mm to 350mm Diameter for Machining & Fabrication

From £988.90 inc VAT

Thick natural white polyethylene rod gripped in blue and grey gloves, wide end face angled forward

Two black and one white polyethylene rod lengths on a white background, circular cut ends to the right

Polyethylene Rod 55mm to 90mm Diameter for Machining & Fabrication

From £145.00 inc VAT

Previous Page 8 / 11Next

Over 1,000 products

Plastics, seals, matting & more

Trade & bulk orders

Volume quotes available on request

Easy returns

See our returns policy for details

All major cards accepted

Credit & debit cards welcome