For Help or to Order over the Phone

+44 1282 277786

Free Shipping On All UK Orders

sales@industrial-polymers.co.uk

Polyethylene

75 products

Showing 1 - 24 of 75 products

This page covers the polyethylene family — HDPE, HMWPE and UHMWPE. As a family they are tough, chemically resistant and food-safe, spanning general-purpose HDPE through to extreme-abrasion UHMWPE. If you already know the grade you need, jump straight to it below; if you are choosing between them, our technical team will match the grade to your application.

Covers the polyethylene family — HDPE, HMWPE and UHMWPE
Cut to size on every sheet, rod and tube line
Food-safe and certified grades available
Same-day despatch on stock items ordered before 2pm

Related: HDPE UHMWPE HMWPE Polyethylene

Cut-to-size and bulk pricing available on every line. Ordered before 2pm on a working day, UK stock items ship same day. Need a size that isn't listed? Contact our technical team and we will quote it.

Showing 1 - 24 of 75 products

Four steel 205-litre drums stored on a yellow polyethylene 4 drum spill containment pallet with black mesh grille deck and forklift access pockets, shown in a warehouse

4 Drum Spill Containment Pallet – Bunded Spill Pallet for 205L Drums

£583.00 inc VAT

Grey-gloved hands supporting a long black HDPE rod against a pale wall, brushed end face to the right

Matt black HDPE rod resting diagonally on a white studio ground, flat sawn end at the lower left

Black HDPE Rod 10–300mm | Impact-Resistant Polyethylene

From £10.28 inc VAT

Black HDPE sheet lifted in two gloved hands over a green workbench, matt face and square edge in view

Black HDPE sheet corner on a white studio backdrop, satin face shading to a crisp square-cut edge

Black HDPE Sheet PE300 1–60mm | Cut to Size, UV Stable

From £12.99 inc VAT

Gloved hands supporting a black UHMWPE rod tapering into the distance, grainy end face nearest camera

Short black UHMWPE rod on a pale grey studio surface, matt round end face towards the left

Black UHMWPE Rod 20–200mm | Ultra Wear-Resistant Plastic

From £12.28 inc VAT

Grey knit gloves tilting a large black UHMWPE panel in a bare workshop, fine brushed grain across the face

Black UHMWPE sheet squared up on a pale grey studio ground, matt face above a clean square-cut edge

Black UHMWPE Sheet 5–80mm | Ultra Wear-Resistant Plastic

From £21.12 inc VAT

Gloved hands lifting a blue PE500 HMWPE sheet over timber bearers, showing the planed face and square-cut edge

Blue PE500 HMWPE sheet panel angled on white, planed satin face and square-cut edge showing its thickness

Blue PE500 Sheet (HMWPE) 10–25mm | Cut to Size, Food Safe

From £1.00 inc VAT

Deep burgundy-brown PE500 slab angled on white, matt face and a thick square-sawn edge

Burgundy PE500 polyethylene sheet on a timber workbench with a router-cut wear strip and burgundy swarf beside it

Burgundy PE500 Sheet 12–25mm | Hard-Wearing Polyethylene

From £27.20 inc VAT

Blue closed-cell foam sheet resting on a white board, fine cell texture along the cut edge

Blue foam insert cut to hold a steel edge finder inside an aluminium flight case

Expanded Polyethylene Foam Sheets 10mm | Self-Adhesive Closed-Cell XLPE

From £13.00 inc VAT

Black gloves tilting a green PE500 panel in a workshop, matt face and thin square edge, blue racking behind

Green PE500 slab angled on white, fine brushed grain across the face and a thick square-cut edge

Green PE500 Sheet 10–25mm | Hard-Wearing Polyethylene

From £24.32 inc VAT

Charcoal-black HDPE rod angled towards the camera, sawn end face lit against a mottled stone-beige backdrop

Black HDPE rod on a workshop bench beside folded drawings, callipers and a tool board

HDPE Black Plastic Rod - 10mm To 225mm Dia.

From £13.70 inc VAT

Natural HDPE round rod in white, close-up of the smooth cut end on white background

Natural white HDPE rod lit by a bench lamp, with callipers and engineering drawings alongside

HDPE Natural Plastic Rod - 10mm To 225mm Dia.

From £15.48 inc VAT

Natural white HDPE rod at an angle on a white background, smooth cut end facing the camera

White HDPE rod resting on a steel bench over engineering drawings, callipers alongside and a lathe behind

HDPE Natural Plastic Rod - 120mm Dia.

From £69.03 inc VAT

Natural white HDPE rod photographed at an angle, cut face catching the light against a pale backdrop

White HDPE rod under a bench lamp on a worn steel bench, callipers, pencil and drawings beside it

HDPE Natural Plastic Rod - 12mm Dia.

From £14.57 inc VAT

Length of natural white HDPE rod on a plain background, angled to show the flat sawn end

White HDPE rod on a scratched steel bench with vernier callipers and a dimensioned drawing beneath

HDPE Natural Plastic Rod - 60mm Dia.

From £41.61 inc VAT

Corner of a natural white HDPE sheet on a grey surface, square-cut edge showing the sheet thickness

White HDPE sheet on a workbench with a tape measure across it, pliers, saw and knife to one side

HDPE Natural Plastic Sheet – 1mm to 5mm | PE300 Grade | Food Safe, Low Friction & Chemical Resistant

From £17.60 inc VAT

Save £0.32 inc VAT

Thick white HDPE board on a stainless steel table in a commercial kitchen, mixer and bowls behind

Cream HDPE liner lining the V of a rusted steel hopper, bolted frame and discharge chute below

HDPE Natural Sheet Food Grade 1mm to 30mm Thickness in 10 Sizes

From £10.99 inc VAT £11.31 inc VAT

Large-diameter natural white HDPE rod billet held in two gloved hands, broad flat end face forward

Cream, black and white HDPE rods laid side by side on white, round cut ends angled to the viewer

HDPE Rod from 100mm to 180mm Diameter for Machining & Fabrication

From £244.44 inc VAT

Gloved hands holding a natural white HDPE PE300 sheet in a workshop, square-cut edge visible

Chef in whites slicing peppers and cucumber on a thick white HDPE board in a stainless steel kitchen

HDPE Sheet High Density Polyethylene PE300 Food Safe in Multiple Sizes

From £6.42 inc VAT

Save £69.22 inc VAT

Fanned stack of white HDPE sheets on a workshop bench with a tape measure and craft knife

Stack of white HDPE sheets fanned on a bench in a bright factory, assembly line and staff behind

HDPE Sheet PE300 Natural & Black 2mm to 8mm for Food & Industrial Use

From £112.99 inc VAT £182.21 inc VAT

Glossy black HDPE rod set diagonally on white, its round cut face angled towards the viewer

Matt black HDPE rod standing at a shallow angle on white, dull circular sawn end at the lower left

High Density Polyethylene Black Rod for Food Industry Applications 10mm to 225mm diameter

From £3.16 inc VAT

Heavy black HDPE billet lying across a white background, matt end face filling the left of frame

Matt black HDPE billet alone on a white sweep, round sawn face towards the lower left

High Density Polyethylene Black Rod for Food Industry Use 250mm to 300mm diameter

From £249.74 inc VAT

Black polyethylene slab angled on white, matt face and thick square-sawn edge

Thick black HDPE slab on a workshop bench with a machined black guide block cut from it, milling machine behind

High Density Polyethylene Black Sheet for Food Industry Applications 15mm to 60mm thick

From £36.24 inc VAT

Thin square black polyethylene sheet on white, soft highlight across the matt face

Thin black HDPE sheets fanned on a workbench with a cut strip and a steel rule under a strip light

High Density Polyethylene Black Sheet for Food Industry Applications 1mm to 12mm thick

From £2.96 inc VAT

Three HDPE rods side by side on white in cream, black and slim white, stepped diameters, cut ends forward

Heavy milky-white HDPE billet held in grey gloves, racked bar stock stacked out of focus behind

High Density Polyethylene Natural (milky-white) / Black Rod 100mm to 180mm dia for Containers & gears

From £244.44 inc VAT

Page 1 / 4Next

Over 1,000 products

Plastics, seals, matting & more

Trade & bulk orders

Volume quotes available on request

Easy returns

See our returns policy for details

All major cards accepted

Credit & debit cards welcome