
Rubber & FoamSKU IP-CPR-84X19-9M
3-Channel Rubber Cable Protector – 84mm x 19mm – 9m Roll
This 3-channel rubber cable protector 84mm x 19mm keeps power, data and AV leads apart and safely covered where they cross offices, event spaces and light workshops. Yellow bars on both sloped edges make the run easy to see, and it is supplied as one continuous 9m roll that you cut to length.
At a glance
- 84mm wide x 19mm high multi-channel floor cable cover
- Three channels: one 23mm x 11mm centre, two 18mm x 10mm outer
- Yellow high-visibility bars along both sloped edges
- Pre-split base so leads push up into each channel without threading
- 85° Shore A black elastomer with a ribbed, grippy underside
- Supplied as a 9m roll; cut square with a sharp knife
Typical uses
- Separating power and network leads across desk clusters and IT rooms
- Stage, exhibition and conference set-ups with mixed AV cables
- Light workshop and warehouse walkways crossed by trolleys
- School halls, lecture rooms and retail corridors
Which one do I need?
| Cable protector | Channels | Best for |
|---|---|---|
| 74mm x 18mm single channel | 1 x 19 x 6mm | One lead across an office or classroom |
| 84mm x 19mm (this cable protector) | 3 (23 x 11, 2 x 18 x 10mm) | Keeping two or three leads separate in a low, visible cover |
| 127mm x 28mm industrial | 1 x 23mm round | One thicker cable in busier workshops |
| 178mm x 30mm hi-vis | 3 x 23mm | Heavier cables and site or warehouse traffic |
Technical drawing
Specification
| Product | 3-channel rubber cable protector |
| Material | Elastomer, 85° Shore A |
| Colour | Black with yellow edge bars |
| Overall width | 84mm |
| Overall height | 19mm |
| Centre channel | 23mm x 11mm |
| Outer channels | 18mm x 10mm (two) |
| Tensile strength | 15.1 MPa |
| Elongation at break | 258% |
| Working temperature | -15°C to +55°C |
| Unit of sale | One 9m roll |
How much do I need?
Add up the width of every walkway the cables cross and allow about 100mm extra at each end. Two 3m aisle crossings and one 1.5m doorway need 7.5m plus 0.6m of overrun, so 8.1m: one 9m roll covers it.
Fitting tips
- Let the roll lie flat at room temperature before fitting so it loses its coil set.
- Put the thickest lead in the 23mm x 11mm centre channel and smaller leads in the outer channels.
- Open each base split, push the lead up into its channel and let the base close.
- Lay the cover square across the walkway so the yellow bars face approaching traffic.
Complete your project
- Rubber Cable Protector – Single Channel 74mm x 18mm – 9m Roll
- Rubber Cable Protector – 127mm x 28mm, 23mm Hole – 4.5m or 9m Length
- Hi-Vis Rubber Cable Protector – 178mm x 30mm, 3 x 23mm Channels – 4.5m Length
Questions
What size cables fit each channel?
The centre channel is 23mm x 11mm and the two outer channels are 18mm x 10mm each, which suits standard power leads, network cables and AV leads.
Can I cut the roll into several cable covers?
Yes. Cut it square with a sharp utility knife; each piece works on its own.
Will the multi-channel cable protector slide on carpet?
The ribbed rubber base grips carpet, vinyl, timber and concrete. On polished floors add double-sided tape under the edges if needed.
Can trolleys roll over it?
Yes, the sloped sides let people, office chairs and light trolleys cross. It is not rated for vehicles.
Need help choosing? Contact our team and we will recommend the right cable cover.
Product details
| SKU | IP-CPR-84X19-9M |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:3-Channel Rubber Cable Protector – 84mm x 19mm – 9m Roll