
Rubber & FoamSKU IP-EPDML-50X50-STD
Black EPDM Rubber L Profile – 50mm x 50mm Angle Trim – 4m Length
This black EPDM rubber L profile 50mm x 50mm is an equal-leg angle trim with 5.5mm thick legs, used to protect and seal corners on frames, platforms, cabinets and vehicle bodies. It is sold as one continuous 4m length.
At a glance
- Equal-leg rubber angle trim: 50mm x 50mm
- 5.5mm leg thickness for robust impact and corner protection
- Solid EPDM, 70 Shore A, 0.66kg per metre
- Resists weathering, UV, ozone and ageing for indoor or outdoor use
- Working temperature -40°C to 120°C
- Supplied as a single 4m length, easy to cut to size
Typical uses
- Corner protector on steel frames, racking ends and platforms
- Edge protection for panels, enclosures and structures
- Sealing gaps around doors, hatches and window frames
- Finishing trim on caravans, commercial vehicles and rail interiors
- Covering stepped edges to reduce trip and knock damage
Which one do I need?
| Profile | Best for |
| 20mm x 10mm, 2mm wall | Light trim on thin sheet and panel edges |
| 35mm x 10mm | Wide flat leg with a low upstand for ledges and step nosings |
| 50mm x 50mm x 5.5mm (this item) | General-purpose corner protection and sealing on frames and cabinets |
| 60mm x 60mm x 10mm | Heavy-duty corner guards that take repeated knocks |
| 100mm x 50mm x 7mm | Wide unequal angle for dock edges and large platforms |
Technical drawing
Specification
| Material | EPDM rubber (ethylene propylene diene monomer) |
| Colour | Black |
| Profile | Equal-leg L section (angle trim) |
| Leg sizes | 50mm x 50mm |
| Leg thickness | 5.5mm |
| Hardness | 70 Shore A |
| Weight | 0.66kg per metre |
| Temperature range | -40°C to 120°C |
| Tensile strength | 9 MPa |
| Elongation at break | 275% |
| Compression set | 22.5% (22 h at 70°C) |
| Unit of sale | One 4m length |
How much do I need?
Add up every corner or edge you want to cover and allow about 5% for mitres and trimming, then divide by 4 and round up. For example, protecting the four 1.8m upright corners of two steel cabinets needs 8 x 1.8m = 14.4m, plus 5% = about 15.1m, so order four 4m lengths.
Fitting tips
- Clean and degrease the corner before fitting or bonding.
- Cut with a sharp knife or fine-toothed saw for a clean, square end.
- For a permanent fix, run polyurethane or silicone sealant along both inner faces of the angle.
- Mitre the ends at 45° where two lengths meet at a corner.
- Let the sealant cure fully before the corner takes knocks.
Complete your project
- Black EPDM Rubber L Profile – 60mm x 60mm x 10mm – 3m Length
- Black EPDM Rubber L Profile – 100mm x 50mm x 7mm – 4m Length
- Black EPDM Rubber L Profile – 35mm x 10mm – Roll
Questions
Can this rubber angle trim be used outdoors?
Yes. EPDM resists weathering, UV and ozone, so it stays flexible outside.
How do I cut the 4m length?
The 5.5mm rubber cuts cleanly with a sharp utility knife, heavy-duty shears or a fine-toothed saw.
Does the corner protector need to be glued?
For a permanent fix or a seal, bond it with polyurethane or silicone sealant. On some corners it will sit in place without adhesive.
Is it one continuous piece?
Yes, each item is a single 4m length that you cut to the sizes you need.
Is it suitable for vehicle bodies?
Yes, EPDM angle trim is widely used as a seal or edge trim on caravans, trailers and commercial vehicles.
Need help choosing a profile? Contact our team.
Product details
| SKU | IP-EPDML-50X50-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Black EPDM Rubber L Profile – 50mm x 50mm Angle Trim – 4m Length