
Rubber & FoamSKU IP-TPEF-150X130X2-BLACK
Hollow TPE Delta D Fender – 150mm x 130mm – Pack of 2 x 5m
Price shown updates with the option you pick.
This hollow TPE delta D fender, 150mm x 130mm, is a heavy-duty triangular-section fender for quay walls, large vessels, commercial berths and loading bays, sold as a pack of two 5m lengths (10m in total) in black or grey. The wide flat back fixes against the structure while the hollow peak flexes on impact and spreads the load into the base.
At a glance
- Delta D fender profile: 150mm across the flat back, 130mm deep from back to peak
- Hollow core gives a softer, more forgiving bump than a solid fender of the same size
- Thermoplastic elastomer (TPE), 68 Shore A, non-marking on boat hulls and painted vehicles
- Good UV, weather, abrasion and tear resistance for permanent outdoor fitting
- Works from -40°C to +90°C
- Black or grey, two 5m lengths per pack for easier handling, 100% recyclable
Typical uses
- Fendering on quay walls, jetties and commercial pontoons
- Heavy rubbing strip on large workboats and commercial vessels
- Impact strip on lorry loading bays and dock edges
- Bumper strip on commercial vehicle bodies and yard walls
Which one do I need?
| Delta D fender size | Best for |
|---|---|
| 60mm x 52mm | Small boats, tenders and light-duty fingers |
| 80mm x 70mm | General marina pontoons, medium workboats and loading bay edges |
| 110mm x 95mm | Larger vessels, busy berths and heavier dock impacts |
| 150mm x 130mm (this product) | Large sea craft, commercial berths, quay walls and heavy loading bay protection |
Technical drawing
Specification
| Profile | Hollow delta D (triangular) fender with flat fixing back |
| Size | 150mm wide x 130mm deep |
| Material | Thermoplastic elastomer (TPE) |
| Hardness | 68 Shore A |
| Density | 1.09 g/cm³ |
| Tensile strength | 7.8 MPa |
| Elongation at break | 700% |
| Operating temperature | -40°C to +90°C |
| Tolerance | ISO 3302-1 E2 / L2 |
| Colours | Black, grey |
| Unit of sale | One pack of two 5m lengths (10m) |
How much do I need?
Measure every edge you want to protect and add about 5% for trimming at the ends and corners. Example: a 14m berth face needs 14m, plus 5% = 14.7m, so order two packs (20m) of the 150mm x 130mm fender.
Fitting tips
- Fix through the wide flat back with stainless screws and penny washers at roughly 300mm centres, closer at the ends.
- Pre-drill the fixing holes so the profile does not distort as screws are tightened.
- Cut cleanly with a sharp knife or fine saw; mitre the ends at corners for a neat finish.
Complete your project
- Hollow TPE Delta D Fender – 80mm x 70mm – 10m Coil
- TPE Delta D Fender – 110mm x 95mm – 2 x 5m Pack
- TPE B Fender – Solid 80mm x 40mm – 25m Coil
Questions
What is a delta D fender?
It is a fender with a triangular, D-like cross-section: a wide flat back that fixes to the structure and a narrower peak that takes the knocks.
Will the 150mm x 130mm fender mark my boat?
No. The TPE compound is non-marking, so it will not leave black streaks on gelcoat or paintwork.
Should I choose 150mm x 130mm or 110mm x 95mm?
Choose 150mm x 130mm for large sea craft, commercial berths and heavy dock impacts, where the deep hollow absorbs the most energy. The 110mm x 95mm size suits larger leisure boats and busy pontoons.
Why is it supplied as two 5m lengths?
A large-section fender is heavy and stiff in a single coil, so two 5m lengths are easier to carry, store and fit.
Need help choosing a fender? Contact our team and we will be glad to help.
Product details
| SKU | IP-TPEF-150X130X2-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Hollow TPE Delta D Fender – 150mm x 130mm – Pack of 2 x 5m