
Rubber & FoamSKU IP-ERBF-22X14-STD
EPDM Rubber B Fender – 22mm x 14mm – 36m Roll
This EPDM rubber B fender 22mm x 14mm is our smallest B-profile fender: a solid black EPDM strip with twin rounded faces and a central fixing slot, made to absorb knocks on small craft, vehicles and walls. It is sold as one continuous 36-metre roll.
At a glance
- Compact 22mm wide x 14mm high B profile
- Solid EPDM rubber, 70° Shore A, approx. 0.39kg per metre
- Excellent resistance to UV, ozone and weathering – indoor or outdoor
- Central slot hides the fixings below the impact face
- Flexible enough to follow gentle curves on hulls and walls
- One 36m roll in black
Typical uses
- Rubbing strake and gunwale protection on dinghies, tenders and small boats
- Light pontoon and jetty edge protection
- Wall and column guards in car parks and service areas
- Bumper strips on vans, trailers and commercial vehicle bodies
Which one do I need?
Pick the B fender by how heavy the impacts are and how much face height you have to fix to.
| Size | Best for |
|---|---|
| 22mm x 14mm EPDM (this product) | Smallest craft, trailers and light wall guarding where a slim, neat strip is wanted |
| 38mm x 13mm neoprene | Wider, low-profile strake for dinghies and small workboats |
| 45mm x 25mm TPE | Deeper fender for heavier knocks on boats and loading areas |
| 60mm x 14mm neoprene | Broad, flat strake covering a taller hull edge |
Technical drawing
Specification
| Profile | B fender, 22mm x 14mm |
| Material | EPDM rubber |
| Hardness | 70° Shore A |
| Weight | Approx. 0.39kg per metre |
| Tensile strength | 7.2 MPa |
| Elongation at break | 305% |
| Density | 1.28 g/cm³ |
| Colour | Black |
| Unit of sale | One 36m roll |
How much do I need?
Measure every edge you want to protect and add a little for mitres. Example: both sides of a 4.5m dinghy plus the transom need about 2 x 4.6m + 1.6m = 10.8m, so one 36m roll covers three similar boats.
Fitting tips
- Fix through the base of the central slot with stainless steel screws so the heads sit below the rounded faces.
- Space fixings about 200-300mm apart, closer at ends and on curves.
- Mitre-cut the strip at sharp corners rather than forcing a tight bend.
- Cut with a sharp blade or fine-tooth saw and let the rubber reach room temperature before fitting.
Complete your project
- Neoprene Rubber B Fender – 38mm x 13mm – 36.57m Coil
- TPE B Fender – 45mm x 25mm – 25m Coil
- Neoprene B Fender – 60mm x 14mm – 30.48m Coil
Questions
Can this B fender be used outdoors?
Yes. EPDM resists UV light, ozone and weathering, so it suits boats, jetties and outdoor walls.
How do I fix it?
Screw or bolt through the central slot into the mounting surface, using stainless fixings outdoors or near water.
Is it big enough for a large boat?
No. At 22mm x 14mm it is a light rubbing strip for small craft, vehicles and walls, not a mooring fender for heavy vessels.
Will it go round curves?
It follows gentle curves on a hull or wall. For sharp corners, mitre-cut and butt the ends.
Not sure which size or material is right for your job? Contact our team with your panel thickness or gap size and we will help you choose.
Product details
| SKU | IP-ERBF-22X14-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Rubber B Fender – 22mm x 14mm – 36m Roll