
Rubber & FoamSKU IP-SGTS-9X18.3-8M
Self-Grip EPDM Top Seal – 9mm x 18.3mm – Sponge Bulb, Fits 1-2mm Panels – 8m to 25m
Price shown updates with the option you pick.
A push-on edge seal for 1 mm to 2 mm panels: a solid EPDM rubber clip with a steel carrier inside, topped by a soft, hollow sponge EPDM bulb. The clip grips the edge with no glue. When a door, hatch, lid or window closes onto the bulb, the bulb squashes and makes a watertight, draught-proof line. The section is 9 mm wide and 18.3 mm high, with a 9.2 mm deep grip and an 8.1 mm wide bulb. Choose one continuous length from 8 m to 24 m, or a full 25 m coil. It is in stock in the UK for same-day dispatch.
At a glance
- Fits: sheet, panel and flange edges 1 mm to 2 mm thick, at least 9.2 mm deep
- Size: 9 mm wide × 18.3 mm high; 8.1 mm bulb; 9.2 mm grip depth; 4 mm mouth
- Construction: solid EPDM grip (80 ± 5° Shore A) over a U-shaped steel carrier, with twin gripping barbs inside and a closed-cell sponge EPDM bulb on top
- Seals best when the closed gap squeezes the bulb by 30–40 %
- Working temperature: −40 °C to +80 °C; ozone-tested EPDM for outdoor use
- Price: £20.76 per metre inc VAT for 8 m to 24 m. The full 25 m coil is £16.62 per metre (£415.50), so it costs less than any cut length from 21 m up.
Technical drawing

How it fits

- Clean the edge and file off any burrs.
- Start at one end and press the seal onto the edge with your thumbs. Tap it fully home with a rubber or plastic mallet, working along the run.
- Ease it round corners rather than stretching it. Stretched rubber shrinks back later and leaves gaps.
- Cut it to length with heavy-duty scissors or snips and butt the two ends tightly together.
Typical uses
- Window, side-glass and roof-panel edges on cars, vans, buses and trains
- Doors, hatches and inspection covers on machinery, trailers and enclosures
- Marine lockers, hatches and equipment covers
- Interior side panels, cabinet doors and furniture edges
Specifications
| Property | Value | Test method |
|---|---|---|
| Dimensions and supply | ||
| Overall width (base) | 9 mm | Nominal |
| Overall height | 18.3 mm | Nominal |
| Bulb width | 8.1 mm | Nominal |
| Grip depth (inside channel) | 9.2 mm | Nominal |
| Mouth opening | 4 mm | Nominal |
| Panel thickness it fits | 1 mm to 2 mm | - |
| Dimensional tolerance | Not stated by the manufacturer; ask us before ordering for a tight fit | - |
| Colour | Black | - |
| Lengths | 8 m to 24 m in one piece (1 m steps), or a full 25 m coil | - |
| Whole profile | ||
| Construction | Solid EPDM grip, closed-cell sponge EPDM bulb, steel carrier | - |
| Hardness range quoted for the profile | 67–82° Shore A | - |
| Operating temperature | −40 °C to +80 °C | - |
| Recommended bulb compression | 30–40 %; 40 % maximum in normal service (never above 50 %) | - |
| Compression set (7 days at 70 °C) | 50 % max | ASTM D1056 |
| Migration stain on painted finishes | Satisfactory | ASTM D925 |
| Contact stain on painted finishes | Satisfactory | ASTM D925 |
| Colour fastness | Satisfactory | ASTM D750 |
| Solid EPDM grip section | ||
| Hardness | 80 ± 5° Shore A | ASTM D2240 |
| Tensile strength | 80 kg/cm² min (about 7.8 MPa) | ASTM D412 |
| Tear resistance | 3 kg/mm min (about 29 kN/m) | ASTM D624 |
| Brittle point | −40 °C | ASTM D746 |
| Compression set | 40 % max | ASTM D395 Type B |
| After air ageing 70 h at 70 °C: hardness change | +2° Shore A | - |
| After air ageing 70 h at 70 °C: tensile change | +15 % | - |
| Ozone resistance (70 h at 50 °C, 50 pphm, 20 % stretch) | No cracks | ASTM D1149 |
| Elongation at break | Not stated by the manufacturer | - |
| Sponge EPDM sealing bulb | ||
| Cell type | Closed cell | - |
| Density (indicative) | 550–600 kg/m³ (0.55–0.60 g/cm³)* | - |
| Tensile strength | 7–10 kg/cm² (about 0.7–1.0 MPa) | ASTM D412 |
| Tear resistance | 0.6–0.8 kg/mm (about 5.9–7.8 kN/m) | ASTM D624 |
| Water absorption (22 h at 23 °C) | 1.2 % max | ASTM D1056 |
| Brittle point | −40 °C | ASTM D746 |
| Ozone resistance (70 h at 40 °C, 50 pphm, 50 % stretch) | No cracks | ASTM D1149 |
| Steel carrier | ||
| Grade | Fe 50 to UNI 5961-67 | - |
| Hardness | 80–90 HRB (Rockwell B) | - |
| Tensile strength | 50 kg/mm² min (about 490 MPa) | - |
All values are from the manufacturer's data for this profile. Metric conversions in brackets are ours. *The manufacturer's sheet prints the sponge density unit as g/cm³; 550–600 can only be kg/m³ for a sponge, so we show it that way. The product data gives 40 % as the maximum compression and the data sheet gives 50 %; we show both so you can design to the safer figure.
Materials and compliance
The grip is solid EPDM rubber and the bulb is closed-cell sponge EPDM, extruded together over a U-shaped Fe 50 steel carrier. EPDM is chosen for outdoor seals because it shrugs off sunlight, ozone, rain and frost. Both rubber parts of this profile have passed the ASTM D1149 ozone test with no cracking, and the profile passes the ASTM D925 staining tests, both rated satisfactory, so it is suited to painted panels.
The manufacturer states no food-contact, fire-rating, WRAS, REACH or other approvals for this profile, so we do not claim any. If you need a certified material, call or email us and we will suggest a seal that has it.
How much do I need?
Measure the full length of edge to be sealed and add 5–10 % for corners and trimming. Each length is supplied as one continuous piece, so a whole door or hatch can be sealed with only one joint. If you need 21 m or more, the 25 m coil is the cheaper choice. For runs longer than 25 m, order more than one coil or length.
Frequently asked questions
Do I need glue or clips to fit it?
No. The steel carrier and the twin gripping barbs inside the channel clamp both faces of the edge, so it stays on by grip alone. On edges that see heavy vibration, a few dots of contact adhesive in the channel add extra hold.
What panel thickness does it fit?
Any edge from 1 mm to 2 mm thick, which covers most sheet steel, aluminium and GRP panels. The edge needs to be at least 9.2 mm deep so the channel can seat fully. For thicker edges, ask us for a matching profile.
How big a gap should the bulb seal?
The bulb is 8.1 mm wide and stands about 7 mm above the base. Size the gap so the closed door or lid squeezes it by 30–40 %, roughly 2–3 mm of squash. Squeezing it more than 40 % in service makes the sponge take a permanent set and stop springing back, and it must never go past 50 %.
Will it go round corners?
Yes. The steel carrier lets it bend round curves and corners by hand. Ease it round tight corners rather than pulling it, and on very tight 90° corners cut a small V out of the grip section (not the bulb) so it lies flat.
How do I cut and join it?
Cut it with heavy-duty scissors, tin snips or a sharp knife and side cutters for the steel. Cut square and butt the two ends tightly together. A drop of rubber-compatible instant adhesive on the end faces makes the joint neater and keeps water out.
Can it be used outdoors and in the cold?
Yes. The EPDM is rated from −40 °C to +80 °C and has passed the ozone test with no cracks, so it suits vehicles, boats, trailers and outdoor enclosures all year round. It is not for hot engine-bay parts above 80 °C.
Is it oil or fuel resistant?
No. EPDM is excellent with water, steam and weather but swells in oils and fuels. For oily areas ask us for a nitrile or neoprene profile.
Is it in stock?
Yes. All lengths and the 25 m coil are held in stock in the UK and go out the same day on orders placed before the cut-off.
Complete your project
- Self-Grip EPDM Top Seal – 6mm x 15mm – for 1.6mm panels
- EPDM Self-Grip Top Seal – 9.5mm x 18mm
- EPDM Self-Grip Top Seal – 10mm x 25mm – for 1.6mm to 3mm panels
Not sure it is the right profile? Call +44 1282 277786 or email sales@industrial-polymers.co.uk with your edge thickness and gap, and we will check it for you.
Product details
| SKU | IP-SGTS-9X18.3-8M |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Self-Grip EPDM Top Seal – 9mm x 18.3mm – Sponge Bulb, Fits 1-2mm Panels – 8m to 25m