
Rubber & FoamSKU IP-CRD-B12E-2
EPDM Sponge Cord – Solid Round 2mm to 40mm – Per Metre
Price shown updates with the option you pick.
This EPDM sponge cord is a soft, solid round cellular rubber cord used as a compressible gasket in grooves, channels and gaps. Choose from 19 diameters between 2mm and 40mm; it is priced per metre with a 5m minimum order, and your quantity is supplied as one continuous length.
At a glance
- Solid round cellular EPDM sponge cord - no hollow centre
- 19 diameters from 2mm to 40mm
- Soft 45 Shore OO sponge that compresses to fill uneven gaps
- Good resistance to UV, ozone, weathering and ageing
- Working range -40°C to +100°C
- Low water absorption (around 5%) for outdoor and marine seals
Typical uses
- Groove gaskets in electrical enclosures, lids and control boxes
- Door, hatch and access-panel seals on machinery and cabinets
- Glazing back-up and draught sealing round frames
- Marine hatches and outdoor equipment housings
- Joined into a ring as a custom sponge O-ring
Which one do I need?
| Gap or groove | Suggested cord |
|---|---|
| Groove 2-5mm wide | 2mm to 6mm cord (slightly larger than the groove) |
| Groove 6-12mm wide | 8mm to 15mm cord |
| Gap 12-20mm | 16mm to 25mm cord |
| Large uneven gaps | 25mm or 40mm cord |
Technical drawing
Specification
| Profile | Solid round cord |
| Material | Cellular (sponge) EPDM |
| Diameters | 2mm to 40mm (19 sizes) |
| Hardness | 45 Shore OO |
| Colour | Black |
| Temperature range | -40°C to +100°C |
| Water absorption | 5% |
| Elongation at break | 388% |
| Compression set | 24% (22 hours at 23°C) |
| Unit of sale | Per metre, minimum order 5m |
How much do I need?
Measure the full length of the groove or the perimeter of the opening and round up to the next whole metre. Example: an enclosure lid 600mm x 400mm has a 2m perimeter, so three lids need 6m - enter 6 in the quantity box and you receive one continuous 6m length. The minimum order is 5m per diameter.
Fitting tips
- Choose a cord slightly larger than the groove width so it is held by compression.
- Clean the groove so it is dry and free of oil before pressing the cord in.
- Press the cord in without stretching it - stretched sponge shrinks back and opens a gap at the joint.
- For a ring, cut the ends square and bond them with a cyanoacrylate adhesive.
- Check that the lid closes with light, even compression all round.
Complete your project
- EPDM Sponge Half Round Cord
- Neoprene Sponge Bonnet Seal 25mm x 23mm
- EPDM Sponge Door Seal 21mm x 25.5mm
Questions
Is the sponge cord solid or hollow?
It is a solid round cord of cellular EPDM sponge, with no hole through the centre.
Is my order cut into metre pieces?
No. The quantity you enter is supplied as one continuous length of the diameter you choose.
Why is there a 5m minimum?
The cord is cut from long coils, so 5m is the shortest length we supply per diameter.
Can I make an O-ring from it?
Yes. Cut the ends square and bond them with a cyanoacrylate adhesive to make a sponge ring to any size.
Can it be used outdoors?
Yes. EPDM sponge resists UV, ozone and weathering and works from -40°C to +100°C.
Need help choosing the right profile? Contact our team for advice.
Product details
| SKU | IP-CRD-B12E-2 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Sponge Cord – Solid Round 2mm to 40mm – Per Metre