
Rubber & FoamSKU IP-NSBS-25X23-10M
Neoprene Sponge Bonnet Seal – 25mm x 23mm – 10m to 50m Lengths
Price shown updates with the option you pick.
This neoprene sponge bonnet seal 25mm x 23mm is a soft, closed-cell sealing profile with a domed top and a slotted base, used to close the gap between a hinged lid, bonnet or access panel and its frame. It is sold as one continuous strip in your chosen length from 10m to 49m, or as a full 50m coil.
At a glance
- 25mm wide x 23mm high domed sponge profile with a central 3mm slot in the base
- Expanded neoprene sponge, 40 Shore OO - compresses easily under a closing lid
- Seals out water, dust, draughts and rattle between panel and frame
- Rated -40°C to +115°C, with good weathering and ageing resistance
- Approx. 340g per metre; cuts cleanly with a sharp knife
- Supplied as one continuous length - no joins within the strip
Typical uses
- Bonnet, engine cover and hatch seals on vehicles, plant and generators
- Lid seals on electrical cabinets, control boxes and equipment housings
- Door and access-panel seals on machinery guards and enclosures
- Weather seals on trailer, horsebox and kiosk lids
- Anti-rattle and vibration-damping strip between metal panels
Technical drawing
Specification
| Profile | Domed sponge section with slotted base |
| Overall size | 25mm wide x 23mm high |
| Base legs | 9mm and 8mm wide, either side of a 3mm slot |
| Material | Expanded neoprene (polychloroprene) sponge |
| Hardness | 40 Shore OO |
| Colour | Black |
| Weight | Approx. 340g per metre |
| Temperature range | -40°C to +115°C |
| Lengths | 10m to 49m in 1m steps, or a full 50m coil |
How much do I need?
Measure the full perimeter that needs sealing and add about 2% for trimming. Example: an equipment lid 1.2m x 0.8m has a perimeter of 4m, so ten identical lids need about 41m - choose the 41m length. If you need more than about 38m, the full 50m coil is the better buy, as it costs less than the longest cut lengths.
Fitting tips
- Clean the mating face with a solvent wipe so it is dry and free of oil before fitting.
- Lay the flat base of the profile against the frame and let the domed top meet the closing lid.
- Butt the ends together at a straight run rather than in a corner, and cut square with a sharp trimming knife.
- Do not stretch the sponge as you fit it - stretched sponge shrinks back and leaves gaps at the ends.
- Check that the lid closes onto the dome with light, even compression all round.
Complete your project
Questions
Is the strip supplied in one piece?
Yes. Whatever length you choose, it is cut as one continuous strip with no joins.
Why is the 50m coil cheaper than a 45m length?
The full coil leaves the factory uncut, so there is no cutting or handling cost. If you need more than about 38m, the 50m coil is the better value.
How hard is the sponge?
It is a soft 40 Shore OO expanded neoprene, so it compresses under light closing pressure and recovers when the lid is opened.
Can it be used outdoors?
Yes. Neoprene sponge has good weathering and ageing resistance and works from -40°C to +115°C.
How do I fix it in place?
Fix the flat base to a clean frame with a suitable contact adhesive, or locate it on a matching flange. Keep the domed face towards the closing lid.
Need help choosing the right profile? Contact our team for advice.
Product details
| SKU | IP-NSBS-25X23-10M |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Neoprene Sponge Bonnet Seal – 25mm x 23mm – 10m to 50m Lengths