
Rubber & FoamSKU IP-EPDM-9X7-STD
EPDM Sponge Door Seal – 9mm x 7mm White Adhesive Backed – 100m Coil
A low-profile white door seal in soft EPDM sponge, 9 mm wide and 7 mm high, with a peel-and-stick adhesive base. One continuous 100 m coil. A curved lip rises from a flat 2 mm base and leans over an open recess, so a closing door folds the lip down into the recess rather than crushing solid rubber. That gives a light, quiet close and seals small or uneven gaps on interior doors, cabinets and light hatches. White blends in on painted woodwork and the material is non-marking.
At a glance
- Size: 9 mm wide × 7 mm high, 2 mm base, lip reaching 6 to 6.5 mm across from the back edge
- Shape: wrap-over lip on a flat base; the lip folds over as the door closes
- Fixing: factory-applied adhesive backing with a peel-off liner, for wood, plastic, metal or rubber
- Material: expanded (sponge) EPDM, very soft at 40° Shore OO, non-marking
- Durability: rated excellent for ozone, weather and UV; flexible at -40 °C
- Coil: 100 m continuous length, white, about £3.12 per metre inc VAT
- Stock: held in stock in the UK and dispatched from stock
Typical uses
- Interior house doors: draught, light and noise seal on the door stop or frame rebate
- Cupboard, wardrobe and kitchen unit doors where a soft, quiet close is wanted
- Electrical cabinets, enclosures and equipment lids with small closing gaps
- Windows, glazed closures and light access hatches
- Caravan, vehicle and trailer locker doors (interior or sheltered positions)
Technical drawing

Specifications
| Property | Value | Test method / basis |
|---|---|---|
| Profile type | Wrap-over (hook) lip on a flat base, self-adhesive | Manufacturer's profile drawing |
| Overall width (across the base) | 9.0 mm | Nominal; tolerance BS 3734 Class E3 |
| Overall height (base to top of lip) | 7.0 mm | Nominal; tolerance BS 3734 Class E3 |
| Base thickness | 2.0 mm | Manufacturer's profile drawing |
| Lip reach (back edge to lip tip) | 6.5 mm (datasheet) · 6 mm (web drawing) | Manufacturer's drawings; the two differ by 0.5 mm |
| Sizes in general | Approximate: soft sponge, rounded to the nearest mm | Manufacturer statement |
| Fixing | Factory-applied adhesive backing with peel-off liner | Adhesive type and thickness not stated by the manufacturer |
| Material | Expanded (sponge) EPDM | Manufacturer datasheet |
| Colour | White | Manufacturer product page and datasheet |
| Hardness | 40° Shore OO | Shore OO durometer scale (for soft foams); test standard not stated |
| Density | 0.5 to 0.9 g/cm³ | Manufacturer datasheet; method not stated |
| Weight | 10 g/m: about 1.0 kg per 100 m coil | Manufacturer product page and datasheet (0.01 kg/m) |
| Water absorption | 5% maximum | Manufacturer datasheet; method not stated |
| Compression set | 25% maximum (datasheet, 24 h recovery) · 50% (product page, 22 h) | Manufacturer figures; test temperature and standard not stated. The two sources differ, so plan on the higher figure |
| Heat ageing | ±30% change after 7 days at 70 °C | Manufacturer datasheet; property measured not stated |
| Low-temperature flexibility | Pass at -40 °C | Manufacturer datasheet |
| Ozone resistance | Excellent | Manufacturer datasheet (rating) |
| Weather resistance | Excellent | Manufacturer datasheet (rating) |
| UV resistance | Excellent | Manufacturer datasheet (rating) |
| Mould growth resistance | Very good | Manufacturer datasheet (rating) |
| Service temperature | About -40 °C to +100 °C | Typical for EPDM sponge, not tested on this profile |
| Tensile strength · elongation · tear | Not stated | Not published by the manufacturer for this profile |
| Dimensional tolerance | BS 3734 Class E3 | Manufacturer datasheet |
| Supplied as | 100 m continuous coil | - |
Materials and compliance
Made from expanded EPDM (ethylene propylene diene monomer) sponge. EPDM is a synthetic rubber known for standing up to sunlight, ozone, weathering, steam and dilute acids and alkalis; it is not suited to petrol, mineral oils or solvents. The manufacturer describes the material as non-marking and rates it excellent for ozone, weather and UV, with a pass at -40 °C.
The manufacturer does not state any food-contact, WRAS, fire or REACH/RoHS approval for this profile, so we do not claim one. If you need a certified grade, ask us before ordering.
How it fits

- Measure the gap with the door closed. This seal suits closed gaps of roughly 3 to 6 mm; it stands 7 mm tall when free.
- Clean the surface with isopropyl alcohol or a degreaser and let it dry. Fit above about 10 °C for the best bond.
- Stick the base to the door stop or frame, with the lip leaning towards the closing door and the open side facing the way the door travels.
- Peel the liner a short length at a time and press the base down firmly as you go. Do not stretch the sponge.
- Cut corners square or mitre them with a sharp knife, and butt the ends tightly together.
- Give the adhesive 24 hours to reach full strength before heavy use.
Frequently asked questions
What gap does it seal?
It is 7 mm high when free, and the lip folds down into the recess under it. In practice it suits closed gaps of about 3 to 6 mm. For bigger gaps choose a taller profile; for tighter gaps a thinner strip will close more easily.
Which way round does it go?
The flat 9 mm base goes on the frame or door stop. The lip should lean towards the door so that the door pushes it over into the open recess. If it is fitted the other way the lip has nowhere to fold and the door will be stiff to close.
Will it stick to painted wood, uPVC or metal?
Yes. The factory adhesive bonds to clean, dry wood, plastics, metal and rubber. Very fresh paint, waxed, silicone-treated or dusty surfaces will stop it sticking, so clean and let paint cure first.
Can I use it outdoors?
The EPDM sponge is rated excellent for ozone, weather and UV, and stays flexible at -40 °C. The white colour shows dirt more than black, so it is most at home on interior doors, cupboards and sheltered positions.
What temperatures can it take?
The manufacturer confirms flexibility at -40 °C and tests heat ageing at 70 °C. EPDM sponge is typically used up to about +100 °C; that upper figure is typical for the material, not tested on this profile.
How do I cut and join it?
Cut it with a sharp knife or scissors. Butt-join ends and corners tightly; at a corner either mitre both ends or notch the base and bend the strip round. A dab of cyanoacrylate (superglue) on the butt joint will close it if needed.
Will it mark my door?
The manufacturer describes the material as non-marking, and the white colour suits most painted doors and frames.
Can I buy it by the metre?
This listing is the full 100 m coil, about £3.12 per metre. For a shorter length or several coils, contact us for a price.
Size against a millimetre rule

Complete your project
- EPDM Sponge Crown Strip – 14.5mm x 7.5mm – 50m Coil
- EPDM Sponge Crown Strip – 15mm x 4mm Adhesive Backed – 100m Coil
- EPDM Sponge Multipurpose Seal – 10mm x 7mm – 100m Coil
- EPDM Sponge D Section – 8mm x 10mm – 50m Coil
Data sheet
Download the technical data sheet (PDF)
Need help choosing a seal? Call +44 1282 277786 or email sales@industrial-polymers.co.uk.
Product details
| SKU | IP-EPDM-9X7-STD |
|---|---|
| Weight | 2.2 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Sponge Door Seal – 9mm x 7mm White Adhesive Backed – 100m Coil