
Rubber & FoamSKU IP-EPDMS-10X20-11M
EPDM Sponge Tailgate Seal – 10mm x 20mm, Dual Hardness – Per Metre or 50m Coil
Price shown updates with the option you pick.
A dual-hardness EPDM tailgate seal, 10 mm wide and 20 mm high. A firm solid rubber T-foot (70° Shore A) holds the line straight and bonds flat to the body flange, and a tall, round-topped bulb of soft closed-cell EPDM sponge (40° Shore OO) squeezes up against the closing panel to keep out wind, dust and water. It is an aftermarket reproduction of the MG inner tailgate seal, part no. AHH7833, and works equally well on hatches, lids and access panels.
Cut to your length in one continuous piece from 11 m to 49 m, or buy a full 50 m coil at a lower price per metre. Black. Held in stock.
At a glance
- Size: 10 mm wide × 20 mm high overall
- Solid foot: 10 mm wide × about 4.8 mm tall, 70° Shore A EPDM: stays straight, does not crush
- Sponge bulb: 7 mm wide × 15.2 mm tall, 40° Shore OO: soft, fills uneven gaps
- Weather: EPDM rated excellent for ozone, weather and UV; flexible at -40 °C
- Fixing: plain base, bond in place with rubber-compatible adhesive
- Price: £15.45 per metre inc VAT (11–49 m), £12.36 per metre as a 50 m coil
Technical drawing

Specifications
| Property | Value | Test method / basis |
|---|---|---|
| Profile type | Dual-hardness bulb seal: a solid rubber T-foot carrying a tall, round-topped sponge sealing bulb | Manufacturer's profile drawing |
| Overall width (across the foot) | 10.0 mm | Nominal; tolerance BS 3734 Class E3 |
| Overall height (foot to top of bulb) | 20.0 mm | Nominal; tolerance BS 3734 Class E3 |
| Solid base (foot and neck) | 10 mm wide × about 4.8 mm tall | Manufacturer's product description (the drawing rounds this to 5 mm) |
| Sponge bulb | 7 mm maximum width × 15.2 mm tall | Manufacturer's product description; maximum free size, it compresses into smaller gaps |
| Foot flange thickness / neck width | About 1.8 mm / about 5.2 mm | Scaled from the manufacturer's drawing; not separately stated |
| Fixing | Plain base, no adhesive tape: bond the foot with a rubber-compatible adhesive (cyanoacrylate or contact adhesive) | Manufacturer's drawing shows no tape |
| Material | Solid EPDM base co-extruded with an expanded (sponge) EPDM bulb | Manufacturer datasheet |
| Colour | Black | - |
| Hardness, solid base | 70° Shore A (product page) · 65–75 IRHD (datasheet) | Shore A / IRHD; test standard not stated |
| Hardness, sponge bulb | 40° Shore OO | Shore OO durometer scale (for soft foams); test standard not stated |
| Density, sponge bulb | 0.5 to 0.9 g/cm³ | Manufacturer datasheet; method not stated |
| Weight | 0.14 kg/m: about 7 kg per 50 m coil | Manufacturer product page and datasheet |
| Tensile strength, solid EPDM | 10 MPa | Manufacturer datasheet (solid compound); method not stated |
| Elongation at break, solid EPDM | 500% | Manufacturer datasheet (solid compound) |
| Tear strength, solid EPDM | 50 kN/m | Manufacturer datasheet (solid compound) |
| Compression set, solid EPDM | 21% (22 h at 70 °C) | Manufacturer datasheet (solid compound) |
| Compression set, sponge bulb | 25% maximum (datasheet, 24 h recovery) · 50% (product page, 22 h) | Manufacturer figures; temperature and standard not stated. The two sources differ, so plan on the higher figure |
| Heat ageing, solid EPDM (70 h at 70 °C) | Hardness change 0 IRHD · tensile change +9% · elongation change 0% | Manufacturer datasheet |
| Heat ageing, sponge bulb | ±30% change after 7 days at 70 °C | Manufacturer datasheet; property measured not stated |
| Ozone resistance | No cracks (solid EPDM, 72 h, 40 °C, 22 pphm, extended) · sponge rated excellent | Manufacturer datasheet |
| Water absorption, sponge bulb | 5% maximum | Manufacturer datasheet; method not stated |
| Low-temperature flexibility | Pass at -40 °C | Manufacturer datasheet |
| Weather / UV light resistance | Excellent / excellent | Manufacturer rating |
| Mould growth resistance | Very good | Manufacturer rating |
| Service temperature range | Not stated for this profile. About -40 °C to +100 °C is typical for EPDM sponge, not tested on this profile | Tested points stated: flexible at -40 °C, aged at +70 °C |
| Dimensional tolerance | BS 3734 Class E3 (extruded sponge) | BS 3734 |
| Replaces | Aftermarket reproduction of MG inner tailgate seal, part no. AHH7833 | Manufacturer's product description |
| Supplied length | Any whole length from 11 m to 49 m as one continuous piece, or a full 50 m coil | - |
| Price per metre | £15.45/m inc VAT for 11–49 m; £12.36/m inc VAT as a full 50 m coil (£618.00) | - |
Materials and compliance
Solid EPDM foot co-extruded with a closed-cell expanded EPDM bulb. The manufacturer describes the profile as air and watertight with good UV and weathering resistance, and EPDM as resistant to heat, ozone, steam, ketones and dilute acids and alkalis. Like all EPDM it is not suited to oils, fuels or solvents.
The manufacturer does not state any food-contact (FDA, EC 1935/2004), drinking-water (WRAS), REACH, RoHS or fire-rating approval for this profile, so we do not claim any. If your application needs a certified material, ask us before you order.
How much do I need?
Measure round the opening along the line the seal will follow and add about 5% for trimming and a neat joint. Order that many whole metres. Your length comes as one continuous piece, so there are no joins along the run. If you need 40 m or more, the full 50 m coil (£618.00) costs about the same as 40 m cut to length, so it is usually the better buy.
Fitting
- Remove the old seal and all old adhesive. Clean the flange back to sound paint and wipe it with a solvent cleaner so it is dry and free of grease and wax.
- Dry-fit the seal round the opening, foot down and bulb facing the closing panel. Start at the bottom centre or a hidden corner so the joint is out of the water path.
- Apply adhesive to the foot in short runs (a rubber-compatible cyanoacrylate for small repairs, or a contact adhesive for a full run) and press the foot firmly onto the flange.
- Ease the seal round corners rather than stretching it; stretched sponge shrinks back and opens a gap at the joint.
- Cut the end square with a sharp blade, butt the two ends together and glue the joint faces.
- Close the tailgate gently and check the bulb is squeezed evenly all round before you use it hard.
Frequently asked questions
Will it fit my MG?
It is made as a reproduction of MG inner tailgate seal AHH7833. Check the section against your old seal using the drawing above: 10 mm foot, 20 mm overall height. If in doubt, send us a photo of the old seal's cut end.
What gap does it seal?
Free height is 20 mm, of which 15.2 mm is soft sponge. The sponge does the work, so it suits a closed gap a few millimetres under 20 mm; our fitted illustration shows an example closed gap of about 14 mm. The solid foot does not compress.
Can I use it on things other than cars?
Yes. It suits hatches, access panels, cabinet and enclosure lids, caravan and trailer doors and other closures where a soft bulb meets a flat face. The firm foot gives a straight line on long runs.
Is it self-adhesive?
No. The foot is plain solid EPDM so it can be bonded with the adhesive that suits your surface. A rubber-compatible cyanoacrylate is quick for short lengths; contact adhesive is better for a full run.
What temperatures will it take?
The manufacturer states it stays flexible at -40 °C and gives heat-ageing results at +70 °C. No full service range is stated for this profile; about -40 °C to +100 °C is typical for EPDM sponge, not tested on this profile.
Can it be cut and joined?
Yes. Cut it with a sharp knife or scissors. Butt the ends square and glue the faces with cyanoacrylate. Corner joints can be mitred, but a gentle bend round the corner seals better.
Is it oil and fuel resistant?
No. EPDM is excellent outdoors and in water and steam, but it swells in oils, fuels and solvents. Ask us about nitrile or neoprene profiles for those.
How quickly will it arrive?
It is held in stock and cut to your length, so it goes out with our normal dispatch.
Data sheet
Download the technical data sheet (PDF)
Related seals
- EPDM Sponge Door Seal 10 mm x 15 mm (figure-8, self-adhesive)
- EPDM Sponge D Section 10 mm x 8 mm
- EPDM Dual Hardness Door Seal 16 mm x 17 mm
Need help choosing a profile? Call +44 1282 277786, email sales@industrial-polymers.co.uk or contact our team.
Product details
| SKU | IP-EPDMS-10X20-11M |
|---|---|
| Weight | 3.4 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Sponge Tailgate Seal – 10mm x 20mm, Dual Hardness – Per Metre or 50m Coil