
Rubber & FoamSKU IP-HVCP-127X28-STD
Hi-Vis Cable Protector – 127mm x 28mm, 1 x 23mm Channel – 4.5m Length
This hi-vis cable protector 127mm x 28mm is a heavy-duty rubber floor ramp with a single 23mm channel and bright yellow warning strips, built to shield power cables, hoses and air lines from crushing where vehicles and people cross them. It is sold as one continuous 4.5-metre length.
At a glance
- 127mm wide x 28mm high low-profile ramp
- One central channel for a cable or hose up to 23mm diameter
- Yellow hi-vis strips on both sides for a clear trip-hazard warning
- Tough NR/SBR rubber, 75° Shore A
- Snap-open base: push cables in from underneath instead of threading
- One 4.5m length, cut to size if needed
Typical uses
- Cable and air-line crossings in warehouses and distribution centres
- Temporary power runs across construction site walkways
- Hose and lead protection on machine shop and factory floors
- Event and exhibition cable runs where wheelchair access matters
Which one do I need?
Choose by how many cables you need to cover and how heavy the traffic is.
| Size | Best for |
|---|---|
| 127mm x 28mm, 1 channel (this product) | One cable or hose up to 23mm, single-lead crossings |
| 156mm x 30mm, 2 channels | Two separate cables, e.g. power and data |
| 178mm x 30mm, 3 channels | Three runs side by side in busy aisles |
Technical drawing
Specification
| Width | 127mm |
| Height | 28mm |
| Channel | 1 x 23mm diameter |
| Material | Natural rubber / SBR blend |
| Hardness | 75° ±5° Shore A |
| Colour | Black with yellow strips |
| Fire test | BS 476 Part 7 Class 3 |
| Unit of sale | One 4.5m length |
How much do I need?
Measure the width of the walkway or aisle the cable crosses and add 300mm each side so the ends sit clear of wheels and feet. Example: a 3.6m aisle needs 3.6m + 0.6m = 4.2m, so one 4.5m length covers it.
Fitting tips
- Sweep the floor clear of grit so the base sits flat and does not rock.
- Open the slit in the base and press the cable up into the channel along its length.
- Lay the protector square across the traffic route, not at an angle.
- Let a cold length warm to room temperature before unrolling so it lies flat.
Complete your project
- Hi-Vis Cable Protector – 156mm x 30mm, 2 Channels – 4.5m
- Hi-Vis Rubber Cable Protector – 178mm x 30mm, 3 Channels – 4.5m
- Low Profile Cable Protector – 68mm x 11mm – Per Length
Questions
What size cable will fit?
The single channel takes one cable, hose or air line up to 23mm in diameter.
Do I have to thread the cable through from one end?
No. The base snaps open, so you push the cable up into the channel along its length.
Can wheelchairs and trolleys cross it?
Yes. The low 28mm ramped profile is designed for easy wheelchair and trolley passage.
Is it suitable outdoors?
Yes. The rubber is UV stable for extended outdoor use on sites and external walkways.
Not sure which size or material is right for your job? Contact our team with your panel thickness or gap size and we will help you choose.
Product details
| SKU | IP-HVCP-127X28-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Hi-Vis Cable Protector – 127mm x 28mm, 1 x 23mm Channel – 4.5m Length