
Rubber & FoamSKU IP-RCP-156X30-BLACK
Rubber Cable Protector – 156mm x 30mm, 2 x 23mm Channels – 4.5m Length
Price shown updates with the option you pick.
This rubber cable protector 156mm x 30mm is a heavy-duty, low-profile floor cover that shields power cables, hoses and air lines from forklift, pallet-truck and foot traffic. It is sold as one 4.5 metre length in black or grey, with two 23mm channels and a snap-open base for fast cable changes.
At a glance
- Nominal profile 156mm wide x 30mm high, supplied as a single 4.5m length
- Two cable channels, each 23mm diameter
- Natural rubber / SBR blend, 75 ±5 Shore A - tough enough for industrial vehicle traffic
- Snap-fit base membrane: cables drop in from below, no threading
- Low, sloped hump reduces trip risk and allows easy wheelchair passage
- UV stable, halogen free, low smoke and low fume; flame spread tested to BS 476 Part 7 Class 3
- Black for discreet runs or grey to blend with concrete floors
Typical uses
- Protecting power leads and hoses across warehouse aisles and loading areas
- Temporary or permanent cable runs on construction sites
- Covering air lines and extension leads in machine shops and workshops
- Making cable crossings safer on walkways used by staff, trolleys and wheelchairs
- Outdoor yard runs where UV resistance matters
Which one do I need?
| Protector | Channels | Best for |
|---|---|---|
| 127mm x 28mm | 2 × 23mm | Two runs where a narrower, lower footprint is preferred |
| 156mm x 30mm (this product) | 2 × 23mm | Industrial aisles and yards with vehicle traffic; wider base spreads load |
| 178mm x 30mm | 3 × 23mm | Three separate cable or hose runs in one crossing |
Technical drawing
Specification
| Product | Industrial rubber cable protector, low profile |
| Nominal size | 156mm wide x 30mm high |
| Channels | 2, each 23mm diameter |
| Unit of sale | One 4.5m length |
| Material | Natural rubber / SBR blend |
| Hardness | 75 ±5 Shore A |
| Colours | Black, grey |
| Fire | Surface spread of flame tested to BS 476 Part 7, Class 3; low smoke, low fume |
| Halogens | None |
| Outdoor use | UV stable |
How much do I need?
Measure the width of the crossing and divide by 4.5m, rounding up. Example: a 12m warehouse aisle needs 12 ÷ 4.5 = 2.7, so order 3 lengths. Lay them end to end with the channels aligned so the cable runs straight through.
Fitting tips
- Sweep the floor first so the base sits flat and does not rock under wheels.
- Open the base membrane by flexing the protector, press each cable up into its 23mm channel and let the rubber close round it.
- Lay the protector at right angles to traffic so wheels cross the sloped faces squarely.
- Keep cable diameters within the 23mm channels; never force oversized cables in.
- Choose grey on grey concrete for a neat finish, or black where scuffing and dirt will show less.
Complete your project
- Rubber Cable Protector 178mm x 30mm
- Hi-Vis Rubber Cable Protector 156mm x 30mm
- Rubber Cable Protector 127mm x 28mm
Questions
Can forklifts drive over this cable protector?
It is the toughened industrial version of the low-profile range, designed for areas with vehicular traffic such as warehouses and machine shops. Cross it squarely and at a sensible speed.
What size cable fits?
Each of the two channels is 23mm in diameter, so it suits cables and hoses up to that size, one run per channel.
Do I have to thread cables through the end?
No. The base has a snap-open membrane, so cables are pushed in from underneath and held by the rubber's shape memory.
Can it be used outside?
Yes, the rubber is UV stable for extended outdoor use.
Is it wheelchair friendly?
Yes, the low, sloped profile allows easy wheelchair and trolley passage while cutting trip hazards.
Not sure which cable protector you need? Contact our team and we will help you choose.
Product details
| SKU | IP-RCP-156X30-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Rubber Cable Protector – 156mm x 30mm, 2 x 23mm Channels – 4.5m Length