
Rubber & FoamSKU IP-RCP-178X30-BLACK
Rubber Cable Protector – 178mm x 30mm, 3 x 23mm Channels – 4.5m Length
Price shown updates with the option you pick.
This rubber cable protector 178mm x 30mm covers up to three cables or hoses of up to 23mm diameter across warehouse floors, site walkways and machine shop aisles where forklifts and other vehicles cross. It is sold as one 4.5m length in black or grey.
At a glance
- Industrial cable cover 178mm wide and only 30mm high, with gently tapered edges
- Three 23mm diameter channels for power cables, air lines or hoses
- Snap-fit base: open the slot, press the cable in, no threading
- Toughened natural rubber / SBR blend, 75° ±5° Shore A
- Fire tested to BS 476 Part 7 Class 3, halogen free, low smoke and fume
- UV stable for outdoor use; black or grey to suit the floor
Typical uses
- Temporary power runs across forklift routes in warehouses and distribution centres
- Feeding power and air lines to machines across busy machine shop aisles
- Construction site cable and hose crossings for site vehicles and pedestrians
- A low floor cable ramp at doorways where wheelchairs and trolleys must pass
- Protecting hoses and pipework from crushing on loading bays and yards
Which one do I need?
| Floor cable protector | Channels | Best for |
|---|---|---|
| 127mm x 28mm | 1 x 23mm | A single cable or hose |
| 156mm x 30mm hi-vis | 2 x 23mm | Two cables where the crossing must stand out |
| 178mm x 30mm black or grey (this item) | 3 x 23mm | Three cables or hoses where a discreet colour suits the floor |
| 178mm x 30mm hi-vis | 3 x 23mm | The same size with yellow edges for high-risk crossings |
| 180mm x 36mm | 1 x 30mm | Thicker cables or larger hoses |
Technical drawing
Specification
| Unit of sale | One 4.5m length |
| Width | 178mm |
| Height | 30mm |
| Channels | 3 x 23mm diameter |
| Material | Natural rubber / SBR blend |
| Hardness | 75° ±5° Shore A |
| Colour | Black or grey |
| Fire performance | Surface spread of flame tested to BS 476 Part 7 Class 3 |
| Electrical test | Tested to BS 903 Part C5 at 500V |
| Halogens | None |
| Outdoor use | UV stable |
| Typical settings | Warehouses, construction sites, machine shops |
How much do I need?
Measure the full width of the route the cables cross, divide by 4.5m and round up. Example: a 12m wide warehouse aisle needs 12 ÷ 4.5 = 2.7, so order three lengths (13.5m) and trim the last one to fit. Lengths butt together end to end, so this profile can cover a crossing of any width.
Fitting tips
- Sweep the floor first so grit does not lift the protector or wear the base.
- Lay the length flat and let it relax at room temperature before fitting the cables.
- Open the base slot under one channel at a time and press each cable fully home.
- Butt joined lengths tightly so there is no step for wheels or feet to catch.
- Put one cable or hose of up to 23mm in each channel; never force two into one.
Complete your project
- Hi-Vis Rubber Cable Protector – 178mm x 30mm, 3 x 23mm Channels – 4.5m Length
- Rubber Cable Protector – 127mm x 28mm, 23mm Hole – 4.5m or 9m Length
- Rubber Cable Protector – 180mm x 36mm, 30mm Hole – 4.5m Length
Questions
Can vehicles drive over this cable protector?
Yes. It is the toughened industrial version made for floors with vehicle traffic as well as foot traffic, such as warehouse aisles and site crossings.
Do I have to thread the cables through?
No. Each channel has a snap-open slot in the base, so you push the cable in from underneath and the rubber closes back around it.
What size cables fit?
Each of the three channels takes one cable or hose up to 23mm diameter. For thicker cables, choose the 180mm x 36mm cover with its 30mm hole.
Can wheelchairs and trolleys cross it?
Yes. At 30mm high with tapered sides it forms a low cable ramp that wheelchairs, trolleys and pedestrians cross easily, and it reduces trip hazards.
Is it suitable outdoors?
Yes. The rubber is UV stable, so it can stay out on yards and site walkways.
Not sure which cable cover suits your floor? Contact our team and we will help you choose.
Product details
| SKU | IP-RCP-178X30-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Rubber Cable Protector – 178mm x 30mm, 3 x 23mm Channels – 4.5m Length