
Rubber & FoamSKU IP-BFES-44X19-BLACK
Neoprene B Fender End Stop – 44mm x 19mm Profile
This neoprene B fender end stop 44mm x 19mm caps the cut end of a 44mm x 19mm B fender strip, giving a neat rounded finish that will not snag clothing, ropes or trolleys and protecting the exposed end of the run. Sold individually, pre-punched, in black or grey.
At a glance
- Moulded to suit 44mm x 19mm B fender profiles
- Rounded, snag-free termination for the end of a fender run
- 70° Shore A neoprene rubber – tough but forgiving on impact
- Pre-punched fixing holes, ready to screw in place
- Overall depth 64mm
- Black or grey to match the fender strip
Typical uses
- Finishing rubber rubbing strips on pontoons, jetties and boat sides
- Ends of bumper strips on ambulance and commercial vehicle bodies
- Loading bay edges and factory wall protection rails
- Shopfitting and commercial interiors where a buffer strip stops short
Which one do I need?
| End stop | Matches B fender profile | Typical job |
|---|---|---|
| 51mm x 25mm end stop | 51mm x 25mm | Larger boats and van bodies |
| 44mm x 19mm end stop (this item) | 44mm x 19mm | Small craft, vehicle bodies, wall rails |
| 60mm x 32mm end stop | 60mm x 32mm | Heavier pontoon and dock edges |
Technical drawing
Specification
| Material | Neoprene rubber compound |
| Hardness | 70° Shore A |
| Fits profile | 44mm x 19mm B fender |
| Overall depth | 64mm |
| Colours | Black, grey |
| Preparation | Pre-punched fixing holes |
| Unit of sale | Each |
Installation and care
Butt the end stop tightly against the square-cut end of the 44mm x 19mm fender strip so the profiles line up, then fix through the pre-punched holes into the mounting surface. Wipe clean with mild soapy water; no other maintenance is needed.
Fitting tips
- Cut the fender strip square before fitting so the joint closes up neatly.
- Use stainless steel or other corrosion-resistant screws outdoors and near salt water.
- Do not overtighten – crushing the neoprene distorts the rounded end.
- Order one end stop for each open end of every fender run.
Complete your project
- EPDM Rubber B Fender – 44mm x 19mm – 30m Roll
- Neoprene B Fender End Stop – 60mm x 32mm – Pre-Punched
- Neoprene B Fender End Stop – 51mm x 25mm – Pre-Punched
Questions
Is this end stop supplied with fixings?
No. It comes pre-punched; choose screws to suit your mounting surface.
Will it fit other sizes of B fender?
No. It is moulded to match the 44mm x 19mm B fender profile; see the table above for the 51mm x 25mm and 60mm x 32mm end stops.
Can it be used outdoors?
Yes. Neoprene copes well with weather and is suitable for interior and exterior fendering.
How many do I need?
One for each exposed end. A straight run open at both ends needs two.
Can I get a grey end stop to match a grey fender?
Yes – choose Grey in the colour option.
Need help choosing fendering accessories? Contact our team for advice.
Product details
| SKU | IP-BFES-44X19-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Neoprene B Fender End Stop – 44mm x 19mm Profile