Rubber & FoamSKU IP-SILP-20X4X2-BLACK-10
Silicone L Profile – 20mm x 4mm, 2mm to 4mm Wall – 10m or 25m Coil
Price shown updates with the option you pick.
This silicone L profile, 20mm x 4mm, is a low-profile stepped angle that covers a 20mm-wide face while standing only 4mm proud, ideal for sealing and protecting flat panel edges where a tall upstand would get in the way. It is sold as one continuous coil of 10m or 25m in black, blue, green, red, translucent, white or yellow.
At a glance
- Low-profile angle: 20mm wide and only 4mm high, with a 2mm-thick base and a raised 4mm section
- Firm 70 Shore A silicone that holds its shape on flat edges and resists compression set
- FDA 21 CFR 177.2600 and EC 1935/2004 compliant material for food-contact use
- WRAS approved material for potable water applications
- Works from -50°C to +180°C and resists UV, ozone and weathering
Typical uses
- Low edge seal and finishing strip on sheet metal, glass and panels
- Thin stop or seal around enclosure doors, hatches and HVAC panels
- Hygienic, easy-clean edging on food and beverage equipment
- Edge finish in cleanrooms and laboratories
Which one do I need?
| Silicone L profile | Best for |
|---|---|
| 15.9mm x 6.3mm, 1.5mm wall | Narrower face, slightly taller return |
| 20mm x 4mm (this product) | 20mm face where the trim must stay very low, just 4mm high |
| 20mm x 9mm, 6mm to 8mm wall | Same width with a taller, chunkier 9mm return |
| 20mm x 10mm, 1.5-2mm wall | Thin-wall angle with a 10mm return leg |
| 25mm x 10mm, 2.1mm wall | Wider 25mm face |
Technical drawing
Specification
| Size | 20mm wide x 4mm high |
| Thickness | 2mm base, 4mm at the raised section |
| Material | Silicone rubber |
| Hardness | 70 Shore A |
| Density | 1.18 g/cm³ |
| Tensile strength | 11.3 N/mm² |
| Elongation at break | 530% |
| Compression set (22h at 175°C) | 40% |
| Operating temperature | -50°C to +180°C |
| Approvals | FDA 21 CFR 177.2600, EC 1935/2004, WRAS approved material |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | One 10m or 25m coil |
How much do I need?
Add up the length of every edge to be trimmed and allow about 5% for trimming and mitres. Example: twelve 900mm cabinet shelves edged along the front need 10.8m, plus 5% = 11.3m, so order one 25m coil (or a 10m coil if you can shorten the run).
Fitting tips
- Clean and degrease the edge first; silicone grips best on a dry surface.
- Cut with a sharp knife against a straight edge for a square end; mitre the corners at 45 degrees for a neat return.
- Bed the 20mm face on a thin bead of compatible silicone sealant where a watertight edge is needed.
Complete your project
- Silicone L Profile – 20mm x 9mm, 6mm to 8mm Wall
- Silicone L Profile – 20mm x 10mm, 1.5-2mm Wall
- Silicone L Profile – 15.9mm x 6.3mm, 1.5mm Wall
Questions
What does 20mm x 4mm mean on this silicone L profile?
The profile is 20mm across its wide face and stands only 4mm high, so it gives a slim, low edge rather than a tall angle.
Is the 20mm x 4mm silicone profile food safe?
Yes. The silicone complies with FDA 21 CFR 177.2600 and EC 1935/2004 for food contact, and the material is WRAS approved for potable water.
Does it need adhesive?
For light edge protection it can be positioned without glue. For a secure or watertight fit, bond it with a compatible silicone or polyurethane sealant.
Which colours are available?
Black, blue, green, red, translucent, white and yellow, each in 10m or 25m coils.
Need help choosing a size? Contact our team.
Product details
| SKU | IP-SILP-20X4X2-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 20mm x 4mm, 2mm to 4mm Wall – 10m or 25m Coil