Rubber & FoamSKU IP-SILP-25X10X2.1-BLACK-10
Silicone L Profile – 25mm x 10mm, 2.1mm Wall – 10m or 25m Coil
Price shown updates with the option you pick.
This 25mm x 10mm silicone L profile is a flexible angle extrusion with a 2.1mm wall for capping exposed corners, sealing panel edges and finishing enclosures. Sold by the coil: choose a single 10m or 25m coil in one of seven colours.
At a glance
- L angle: 25mm and 10mm legs
- Uniform 2.1mm wall on both legs
- 60 Shore A silicone, flexible and easy to cut
- Working temperature -50°C to +180°C
- Material meets FDA 21 CFR 177.2600 for food contact; WRAS approved
- Black, blue, green, red, translucent, white or yellow
- Supplied as one continuous 10m or 25m coil
Typical uses
- Edge protection on glass, sheet-metal panels, guards and enclosures
- Sealing and finishing around doors, hatches and machinery
- Food and beverage processing equipment
- Potable water and public water supply installations
- Cleanrooms, laboratories, HVAC and manufacturing enclosures
Which one do I need?
| Profile | Best for |
| 25mm x 10mm, 2.1mm wall (this item) | Wider top face with a short 10mm drop, for panel tops and lids |
| 20mm x 10mm, 1.5-2mm wall | Slightly narrower top face, lighter trim |
| 32mm x 20mm, 2.5mm wall | Bigger edges needing a deeper 20mm drop |
Technical drawing
Specification
| Material | Silicone |
| Profile | L angle, 25mm x 10mm |
| Wall thickness | 2.1mm |
| Hardness | 60 Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Tear strength | 26 N/mm |
| Operating temperature | -50°C to +180°C |
| Food contact | FDA 21 CFR 177.2600 |
| Potable water | WRAS approved |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | One coil, 10m or 25m |
How much do I need?
Add up the length of every edge you want to cover, then allow about 5% for trimming and mitred corners. Example: a cabinet door of 600mm x 400mm has a perimeter of 2 x (600 + 400) = 2,000mm. Four doors need 8m, plus 5% = 8.4m, so one 10m coil covers the job. Twelve doors need about 25.2m: order a 25m coil plus a 10m coil.
Fitting tips
- Clean and dry the edge, removing grease, before fitting.
- Cut square with a sharp knife or snips; mitre ends at 45° for neat corners.
- For light edge capping the profile can be press-fitted; for a permanent or watertight joint bond it with a silicone sealant or compatible adhesive.
- Lay the profile without stretching so it does not shrink back from the corners.
Complete your project
- Silicone L Profile – 20mm x 10mm, 1.5-2mm Wall
- Silicone L Profile – 32mm x 20mm
- Silicone L Profile – 15mm x 11.5mm, 2mm Wall
- Self-Grip EPDM Top Seal – 6mm x 15mm
Data sheet
Download the technical data sheet (PDF)
Questions
Is the material food safe?
Yes. The silicone meets FDA 21 CFR 177.2600 for food-contact use.
Can it be used with drinking water?
Yes. The material is WRAS approved for potable water applications.
Can it be used outdoors?
Yes. Silicone resists UV, ozone and weathering.
Does it need adhesive?
It can often be press-fitted over an edge; for a permanent or watertight fit, bond it with a compatible silicone adhesive.
Can I order a length other than 10m or 25m?
It is sold in full 10m or 25m coils only; combine coils for longer runs.
Need help choosing a profile? Contact our team and we will advise.
Product details
| SKU | IP-SILP-25X10X2.1-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 25mm x 10mm, 2.1mm Wall – 10m or 25m Coil