Rubber & FoamSKU IP-SILP-11X6-BLACK
Silicone L Profile – 11mm x 6mm – 25m Coil
This silicone L profile 11mm x 6mm is a low, compact angle trim that sits over exposed corners and panel edges to seal, cushion and protect them, with an 11mm base, 6mm height and walls from 2mm to 5mm. It is sold per 25m coil in a choice of seven colours.
At a glance
- Silicone L profile 11mm wide x 6mm high
- 2mm base wall with a stout 5mm upright
- 60° Shore A silicone rubber angle trim
- Food-contact (FDA, EC 1935/2004) and WRAS approved compound
- Works from -50°C to +180°C and resists UV, ozone and weather
- Seven colours for colour-coded edge protectors and corner seals
Typical uses
- Low-profile rubber angle trim on glass, sheet metal and panel edges
- Corner seals on doors, inspection hatches and enclosures
- Edge protector on food and drink processing equipment
- Seals in potable water equipment
- Colour-coded edging in laboratories and cleanrooms
Which one do I need?
| Profile | Best for |
| 10mm x 5mm | Slightly smaller, lower edge |
| 11mm x 6mm (this one) | Low corners needing a wider 11mm base face |
| 10mm x 7mm | A little more height on a 10mm base |
| 12mm x 10mm thin wall | Taller corners where a lighter wall is fine |
Technical drawing
Specification
| Material | Silicone rubber |
| Profile | L section (angle) |
| Width (base) | 11mm |
| Height | 6mm |
| Wall thickness | 2mm base, 5mm upright |
| Hardness | 60° Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Operating temperature | -50°C to +180°C |
| Approvals | FDA 21 CFR 177.2600, EC 1935/2004, WRAS |
| Colours | 7 colour options |
| Unit of sale | 25m coil |
Installation and care
Cut the coil to length with a sharp knife or shears. On many edges the profile can simply be pressed into place; for a permanent or watertight fit, bond it with a compatible silicone or polyurethane sealant. Wipe clean with warm soapy water; silicone needs no other maintenance.
Fitting tips
- Clean and degrease the edge before fitting so any sealant bonds fully.
- Decide which face takes the 5mm upright before cutting.
- Cut a few millimetres long and push the ends together to avoid gaps.
- Do not stretch the profile as you lay it, or it will pull back at the ends.
Complete your project
- Silicone L Profile – 10mm x 5mm – 25m Coil
- Silicone L Profile – 10mm x 7mm – 25m Coil
- Neoprene U Channel – 6.5mm x 10.5mm – Cut Length
Questions
Is this silicone L profile 11mm x 6mm suitable for food areas?
Yes. The compound meets FDA 21 CFR 177.2600 and EC 1935/2004 for food contact.
Can this rubber angle trim be used outdoors?
Yes. Silicone resists UV, ozone and weathering, so the profile keeps its shape and colour outside.
Can it be used with drinking water?
Yes, the material is WRAS approved for potable water applications.
How hot can it get?
The profile works continuously from -50°C to +180°C.
How do I cut it?
A sharp utility knife or shears gives a clean square cut.
Need help choosing an edge protector or corner seal? Contact our team.
Product details
| SKU | IP-SILP-11X6-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 11mm x 6mm – 25m Coil