Rubber & FoamSKU IP-SILP-10.3X5-BLACK
Silicone L Profile – 10.3mm x 5mm, 3mm to 3.5mm Wall – 25m Coil
This silicone L profile 10.3mm x 5mm is a small, low-height angle trim with a 3mm to 3.5mm wall, used to protect and seal fine edges on sheet metal, glass and enclosures. It is sold as one continuous 25m coil in a choice of seven colours.
At a glance
- Compact unequal L angle: 10.3mm wide x 5mm high
- Solid 3mm to 3.5mm wall – a sturdy small rubber corner trim
- 60 Shore A silicone: flexible, with a firm edge
- FDA 21 CFR 177.2600, EC 1935/2004 and WRAS approved compound
- -50°C to +180°C; resists UV, ozone and weathering
- Seven colours for colour-coding or matching equipment
Typical uses
- Capping thin sheet-metal and glass edges where space is tight
- Small corner seals on doors, enclosures and HVAC panels
- Food and drink processing equipment trims
- Potable water fittings needing a WRAS approved silicone angle
- Edge finishing in laboratories, cleanrooms and instrument cases
Which one do I need?
| Profile | Choose it when |
|---|---|
| Silicone L 10mm x 3mm | You need the lowest possible upstand |
| Silicone L 10mm x 5mm | A near-identical size with a slightly narrower base |
| Silicone L 10.3mm x 5mm (this item) | A 10mm face with a solid 3–3.5mm wall and 5mm upstand |
| Silicone L 10mm x 7mm | The return face needs a taller 7mm leg |
Technical drawing
Specification
| Profile | Unequal L (angle) |
| Size | 10.3mm wide x 5mm high |
| Wall thickness | 3mm to 3.5mm |
| Material | Silicone rubber |
| Hardness | 60 Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Operating temperature | -50°C to +180°C |
| Approvals | FDA 21 CFR 177.2600, EC 1935/2004, WRAS |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | One 25m coil |
How much do I need?
Measure each edge to be covered and add about 5% for corners and trimming. Example: ten small inspection hatches, each 400mm x 300mm with all four edges trimmed, need 10 x 1.4m = 14m, or about 14.7m with allowance – one 25m coil covers them with 10m to spare.
Fitting tips
- Clean and degrease the edge first; silicone sealants only bond to dry, oil-free surfaces.
- Press-fit for simple edge protection, or bond with silicone sealant for a permanent or watertight joint.
- Cut slightly over length and trim back once fitted.
- Use a sharp knife; at this small size a mitre box gives the neatest corners.
Complete your project
- Silicone L profile 16mm x 10mm
- Neoprene U channel 6.5mm x 10.5mm
- Silicone L profile 10mm x 10mm, thin wall
Questions
Is this silicone L profile safe for drinking water?
Yes. The compound is WRAS approved for potable water.
Can it be used in food areas?
Yes. It meets FDA 21 CFR 177.2600 and EC 1935/2004 for food contact.
Does it need glue?
It can be press-fitted for light edge protection; use silicone sealant where it must stay put or seal water.
Can I use it outdoors?
Yes. Silicone resists UV, ozone and weathering and stays flexible from -50°C to +180°C.
Is every colour the same price?
Yes, all seven colours cost the same per 25m coil.
Need help choosing a size? Contact our team.
Product details
| SKU | IP-SILP-10.3X5-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 10.3mm x 5mm, 3mm to 3.5mm Wall – 25m Coil