Rubber & FoamSKU IP-STSP-4.5X8.5-BLACK
Silicone T Seal Profile – 4.5mm x 8.5mm, 70° Shore A – 25m Coil
This silicone T seal profile 4.5mm x 8.5mm has a 4.5mm wide head on a 2.7mm stem with an 8.5mm overall height, made to press into narrow slots and joints and finish them with a neat, flush cap. It is moulded from 70° Shore A silicone, food-contact and WRAS rated, and sold as a 25m coil in a choice of seven colours.
At a glance
- Silicone T section: 4.5mm head, 2.7mm stem, 8.5mm overall height
- Firm 70° Shore A compound that holds its shape in the slot
- FDA 21 CFR 177.2600 and EC 1935/2004 food-contact compliant
- WRAS approved for drinking water applications
- Works from -50°C to +180°C and resists UV, ozone and weathering
- Black, white, translucent, red, green, blue or yellow
- Supplied as one continuous 25m coil, cut to length on site
Typical uses
- Filling expansion slots and panel joints on food processing lines
- Sealing narrow gaps on stainless catering and brewery equipment
- Joint seal for HVAC ducting and oven or dryer panels
- Colour-coded gap seal for hygiene zones
Which one do I need?
| Profile | Best for |
|---|---|
| 3mm x 6.5mm, 50° Shore A | Very fine slots where a softer, smaller cap is enough |
| 4.5mm x 8.5mm, 70° Shore A (this item) | Narrow slots where a firm, compact 4.5mm cap is needed |
| 9mm x 8mm, barbed leg | Wider slots where the barbed leg grips without adhesive |
| 10mm x 10mm | Larger joints that need a wider head to cover the gap |
Technical drawing
Specification
| Profile | Solid silicone T section |
| Head width | 4.5mm |
| Stem / head thickness | 2.7mm |
| Overall height | 8.5mm |
| Hardness | 70° Shore A |
| Density | 1.18 g/cm³ |
| Tensile strength | 11.3 N/mm² |
| Elongation at break | 530% |
| Tear strength | 31 N/mm |
| Temperature range | -50°C to +180°C |
| Compliance | FDA 21 CFR 177.2600, EC 1935/2004, WRAS |
| Free from | TSE/BSE by-products and phthalates |
| Unit of sale | 25m coil, one colour per coil |
How much do I need?
Add up the length of every slot to be filled and allow about 5% for trimming. For example, a run of eight panel joints each 2.4m long needs 8 x 2.4m = 19.2m, plus 1m for waste, so one 25m coil covers the job with a little spare.
Fitting tips
- Clean and dry the slot first; grease or swarf stops the stem seating fully.
- Start at one end and press the stem in with your thumb, working along a short section at a time.
- Do not stretch the profile as you fit it, or it will shrink back and leave a gap at the ends.
- Use a silicone adhesive in the slot where the joint moves or sees washdown.
Complete your project
- Silicone T Seal Profile – 3mm x 6.5mm, 50° Shore A – 25m Coil
- Silicone T Seal Profile – 9mm x 8mm, Barbed Push-In Leg – 25m Coil
- Silicone T-Section Seal – 10mm x 10mm – 25m Roll
Questions
What slot width does the 4.5mm x 8.5mm T seal suit?
The stem is 2.7mm thick, so choose a slot just under that width for a light interference fit, or bond it in a slightly wider slot with silicone adhesive.
Is this silicone T seal suitable for food contact?
Yes. The compound meets FDA 21 CFR 177.2600 and EC 1935/2004, so it can be used on food processing equipment.
Can I order mixed colours?
Each 25m coil is one colour. Order one coil per colour if you want to colour-code different areas.
Will it cope with hot washdown and ovens?
It is rated from -50°C to +180°C, which covers hot washdown, proving ovens and most dryer panels.
Need help choosing? Contact our team for advice.
Product details
| SKU | IP-STSP-4.5X8.5-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone T Seal Profile – 4.5mm x 8.5mm, 70° Shore A – 25m Coil