Rubber & FoamSKU IP-STSP-4X6.5-BLACK
Silicone T Seal Profile – 4mm x 6.5mm, 60° Shore A – 25m Coil
This 4mm x 6.5mm silicone T seal profile is designed to press into narrow channels and tracking, creating a flush, airtight and moisture-proof barrier. Supplied as a 25m coil, it is manufactured from a premium 60° Shore A silicone compound that remains highly flexible and resists compression set, making it ideal for precision joint protection in demanding industrial environments.
At a glance
- 4mm wide x 6.5mm high T-shaped profile
- 60° Shore A hardness for reliable compression
- FDA 21 CFR 177.2600 and EC1935/2004 compliant for food contact
- WRAS approved for public water supply and drinking water
- Operating temperature range of -50°C to +180°C
- Excellent resistance to UV, ozone and weathering
- Available in 7 distinct colours for colour-coding or aesthetics
Typical uses
- Food processing lines, catering units and brewery pipework
- Temperature-sensitive HVAC ducting and commercial heating enclosures
- Weatherproof hatch boundaries and marine structural joints
- Automotive door trims and custom engine bay seals
Technical drawing
Specification
| Material | Silicone (100% free from TSE/BSE bi-products and Phthalates) |
| Profile Width | 4mm |
| Profile Height | 6.5mm |
| Base Thickness | 2mm |
| Hardness | 60° Shore A |
| Density | 1.15 g/cm³ |
| Tensile Strength | 11 N/mm² |
| Elongation at Break | 550% |
| Compression Set | 31% (22 hours at 175°C) |
| Tear Strength | 26 N/mm |
| Rebound Resilience | 59% |
| Operating Temperature | -50°C to +180°C |
Installation and care
Ensure the target slot or channel is thoroughly cleaned before installation. Measure the required length and mark your cutting coordinates with a non-permanent marker. Cut the silicone profile cleanly using heavy-duty shears or a utility knife. If the application demands it, apply a suitable high-retention silicone adhesive into the channel. Press the vertical leg of the T seal firmly into the gap, smoothing the upper wings flat against the mounting edge for a uniform, flush finish.
Fitting tips
- Always clean out dirt and debris from the mounting slot to ensure a secure fit.
- Use a sharp blade for clean cuts to maintain the integrity of the seal ends.
- When using adhesive, ensure it is compatible with silicone rubber.
- Do not stretch the profile during installation, as it may shrink back over time.
Complete your project
- Silicone T Seal Profile – 3mm x 6.5mm, 50° Shore A – 25m Coil
- Silicone T Seal Profile – 9mm x 8mm, Barbed Push-In Leg – 60 Shore A – 25m Coil
- EPDM Round U Channel – 9mm x 9mm – Fits 1.6mm Panel – Cut Length or 30m Coil
Data sheet
Download the technical data sheet (PDF)
Questions
Is this seal suitable for outdoor use?
Yes, the silicone material provides excellent resistance to UV rays, ozone, and outdoor weathering, preventing cracking and rotting over time.
Can it be used in food preparation areas?
Yes, it is fully compliant with FDA 21 CFR 177.2600 and EC1935/2004 food-grade requirements.
Is it safe for drinking water applications?
Yes, the material is WRAS approved and certified safe for public water supply and drinking water.
How do I fix it in place?
The T-leg is designed to push into a matching channel. For a permanent fix, you can use a standard silicone adhesive within the slot.
Need help choosing the right profile? Contact our team for advice.
Product details
| SKU | IP-STSP-4X6.5-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone T Seal Profile – 4mm x 6.5mm, 60° Shore A – 25m Coil