Rubber & FoamSKU IP-STSP-4X6.5-8050-BLACK
Silicone T Seal Profile – 4mm x 6.5mm, 70° Shore A – 25m Coil
This silicone T seal 4mm x 6.5mm in firm 70° Shore A silicone presses into narrow slots and panel joints to give a tight, flush seal that holds its shape. It is sold as one continuous 25m coil in a choice of seven colours, for food, heating, marine and equipment enclosures.
At a glance
- T section: 4mm wide flange, 6.5mm overall height, 2.2mm stem
- Firm 70° Shore A silicone holds its shape in the slot
- FDA 21 CFR 177.2600 and EC 1935/2004 food-contact compliant
- WRAS approved for drinking water applications
- Working temperature -50°C to +180°C; UV and ozone resistant
- Seven colours for hygiene coding or a discreet finish
Typical uses
- Slot seals on food processing, catering and brewery equipment
- Gap seals on ovens, ducting, furnaces and heating enclosures
- Weatherproof joints on hatches, windows and panels on boats
- Trim and gasket seals in control-unit bays and instrument housings
Which one do I need?
| T seal | Choose it when |
| 4mm x 6.5mm, 70° Shore A (this one) | You want a firm seal that resists being pulled out of the slot and keeps a crisp edge |
| 4mm x 6.5mm, 60° Shore A | Same size, a little softer for easier pressing into tight or curved slots |
| 3mm x 6.5mm, 50° Shore A | A narrower, softer flange for very small gaps |
Technical drawing
Specification
| Material | Silicone rubber |
| Flange width | 4mm |
| Overall height | 6.5mm |
| Stem thickness | 2.2mm |
| Hardness | 70° Shore A |
| Density | 1.18 g/cm³ |
| Tensile strength | 11.3 N/mm² |
| Elongation at break | 530% |
| Compression set (22h at 175°C) | 40% |
| Tear strength | 31 N/mm |
| Rebound resilience | 55% |
| Temperature range | -50°C to +180°C |
| Approvals | FDA 21 CFR 177.2600, EC 1935/2004, WRAS |
| Unit of sale | 25m coil |
How much do I need?
Measure the total length of slot to be sealed and add about 10% for cutting and corners. Example: a cabinet with four doors, each with a 2.4m perimeter, needs 4 x 2.4 = 9.6m, plus 10% = about 10.6m, so one 25m coil covers it with plenty to spare for a second machine.
Fitting tips
- Clean dust and old sealant out of the slot so the stem seats fully.
- Mark cuts with a non-permanent marker and cut square with a sharp knife.
- Where the slot is loose, run a bead of silicone adhesive in first.
- Press the stem in a short section at a time and smooth the flange flat against the face.
Complete your project
- Silicone T Seal Profile – 4mm x 6.5mm, 60° Shore A – 25m Coil
- Silicone T Seal Profile – 3mm x 6.5mm, 50° Shore A – 25m Coil
- Silicone T Seal Profile – 9mm x 8mm, Barbed Push-In Leg – 25m Coil
Questions
Is this silicone T seal suitable for food contact?
Yes. The silicone meets FDA 21 CFR 177.2600 and EC 1935/2004 for food-contact use.
Can it be used outdoors?
Yes. Silicone resists UV, ozone and weathering, so it suits outdoor hatches and panels.
What temperatures can it take?
It works continuously from -50°C to +180°C.
Is it approved for drinking water?
Yes, it is WRAS approved for use with drinking water.
Why choose 70° rather than 60° Shore A?
The firmer 70° grade grips the slot harder and is less likely to roll or pull out on doors that are opened often.
Need advice on the right T section? Contact our team for help.
Product details
| SKU | IP-STSP-4X6.5-8050-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone T Seal Profile – 4mm x 6.5mm, 70° Shore A – 25m Coil