Rubber & FoamSKU IP-SIUC-4.1X8X2-10-BLACK
Silicone U Channel – 4.1mm x 8mm for 2mm Panels – 10m or 30m Coil
Price shown updates with the option you pick.
A push-on silicone U channel made for 2mm sheet: the thickness used for heavier machine guards, enclosure doors, hoppers, splash screens and polycarbonate or acrylic panels. The 2mm slot is 7mm deep, so it takes a long grip on the edge and holds by friction on most jobs, while the finished trim is just 4.1mm wide and 8mm tall. It is extruded from platinum-cured silicone with a smooth, glossy surface that does not yellow, the compound is approved for food-contact use, and it stays flexible from -40°C to +200°C. Choose a 10m or 30m coil in black, translucent or white.
At a glance
- Made for panels and edges 2mm thick (14 gauge steel, 2mm stainless, aluminium, polycarbonate or acrylic)
- 4.1mm wide x 8mm high, 2mm slot, 7mm slot depth, 1mm walls and base
- Platinum-cured silicone, 60 Shore A: soft enough to fit by hand, firm enough to grip
- Service range -40°C to +200°C, from cold stores to oven and heater housings
- Compound approved for food-contact applications
- Glossy, non-yellowing surface with excellent weather resistance
- Black, translucent or white, same price in every colour
- 10m coil (about £29.61 per metre) or 30m coil (about £21.09 per metre)
Typical uses
- Capping the top edge of 2mm stainless splash guards and side guards on food and packaging lines
- Finishing cut-outs, door edges and covers on 2mm steel and aluminium enclosures
- Edging 2mm polycarbonate or acrylic screens, guards and display panels
- Trimming hoppers, chutes and trays in bakeries, kitchens and food plants
- Heat-resistant edge trim round oven, heater and lamp housings where PVC trim would soften
- Protecting hands, cables and hoses from sharp edges on fabricated sheet-metal parts
Technical drawing
![]()
Which size do I need?
Measure the thickness of the edge with callipers, then pick the channel whose slot matches it. A slot that is too wide will slide off; one that is too narrow can split.
| Silicone U channel | Fits edge thickness |
|---|---|
| Silicone Round U Channel 3mm x 5mm | 1mm |
| Silicone U Channel 3.2mm x 5mm | 1.0 – 1.2mm |
| Silicone U Channel 3.6mm x 6mm | 1.5 – 1.6mm |
| Silicone U Channel 4.1mm x 8mm (this one) | 2mm |
| Silicone U Channel 7.1mm x 13mm | 4mm |
| Silicone U Channel 9.1mm x 14mm | 5mm |
Specification
| Property | Value | Test method / basis |
|---|---|---|
| Profile and dimensions | ||
| Profile | U channel with full-radius base (push-on edge trim) | – |
| Overall width | 4.1 mm | Nominal, from profile drawing |
| Overall height | 8.0 mm | Nominal, from profile drawing |
| Slot (grip) width | 2.0 mm | Nominal, from profile drawing |
| Slot depth | 7.0 mm | Nominal, from profile drawing |
| Wall thickness | 1.0 mm | Nominal, from profile drawing |
| Base thickness | 1.0 mm | Nominal, from profile drawing |
| Fits panel / edge | 2 mm | Manufacturer's fitting size |
| Section area | approx. 17 mm² | Calculated from nominal profile |
| Weight | approx. 20 g per metre (0.2 kg per 10 m, 0.6 kg per 30 m) | Calculated from section area at typical silicone density |
| Dimensional tolerance | Typically ±0.25 mm on slot, ±0.4 mm on overall size | Typical for ISO 3302-1 class E2 extrusions; not a guaranteed value |
| Material | ||
| Material | Silicone rubber (VMQ), platinum cured | Manufacturer's specification |
| Hardness | 60 ± 5 Shore A | Shore A durometer (ISO 48-4) |
| Minimum service temperature | -40 °C | Manufacturer's rating |
| Maximum service temperature | +200 °C | Manufacturer's rating |
| Density | typically 1.15 – 1.20 g/cm³ | Typical for 60 Shore A silicone (ISO 2781); not stated by the manufacturer |
| Tensile strength | typically 7 – 9 MPa | Typical for the material class (ISO 37); not stated by the manufacturer |
| Elongation at break | typically 300 – 450 % | Typical for the material class (ISO 37); not stated by the manufacturer |
| Tear strength | typically 15 – 25 kN/m | Typical for the material class (ISO 34-1); not stated by the manufacturer |
| Compression set | typically 15 – 30 % (22 h at 175 °C) | Typical for the material class (ISO 815-1); not stated by the manufacturer |
| Weathering resistance | Excellent | Manufacturer's rating |
| Oil resistance | Fair (not for continuous oil or fuel immersion) | Manufacturer's rating |
| Surface finish | Smooth, high gloss, non-yellowing | Visual |
| Recyclability | Recyclable | Manufacturer's statement |
| Supply | ||
| Colours | Black, translucent, white | – |
| Unit of sale | One continuous 10 m or 30 m coil | – |
| Price per metre | approx. £29.61 (10 m) or £21.09 (30 m) inc VAT | Coil price ÷ coil length |
Need tested values for your own records? Ask us and we will send what is available for the batch you receive.
Materials and compliance
- Platinum-cured silicone: the rubber is vulcanised with a platinum catalyst instead of peroxide. That leaves no peroxide by-products in the part, keeps the translucent and white grades from yellowing, and gives a smooth, glossy skin that is easy to wipe clean.
- Food-contact approved compound: the manufacturer states the compound is approved for food-contact applications, so it is a sensible choice for trims on food processing, bakery, catering and packaging equipment.
- Stable across temperature: silicone keeps its flexibility from -40°C to +200°C, so it neither cracks in a cold store nor softens beside a heater.
The approval relates to the material. Whether a finished assembly complies depends on the application. If you need a declaration of compliance for an audit, contact our team before ordering and we will confirm what paperwork is available for this profile.
How much do I need?
Add together the length of every edge you want to cover and allow about 5% for trimming and joints. Example: a run of six 1.2m splash screens edged along the top needs 7.2m, or about 7.6m with allowance, so a 10m coil does the job. Above about 20m the 30m coil works out cheaper per metre.
Fitting tips
- Deburr the edge, then wipe it clean and dry
- Start at one end and press the channel on with your thumb, working along the edge
- Cut with a sharp knife or scissors slightly over length and push the ends together for a tight butt joint
- For a permanent or sealed fit, or where there is vibration, run a thin bead of silicone or polyurethane sealant into the slot first
Questions
What thickness of panel does it fit?
It is made for edges 2mm thick, which covers 14-gauge steel, 2mm stainless and aluminium sheet and 2mm polycarbonate or acrylic. For 1.5–1.6mm sheet choose the 3.6mm x 6mm channel; for 4mm sheet the 7.1mm x 13mm.
Does it need glue?
Usually not. On a clean 2mm edge the 7mm-deep slot grips by friction. Where the part vibrates, is handled often or must be sealed, bed it in silicone or polyurethane sealant.
Is it suitable for food equipment?
Yes. The manufacturer states the compound is approved for food-contact applications, and the glossy surface wipes clean easily.
What temperatures can it handle?
It is rated from -40°C to +200°C, so it suits ovens, heater panels and lamp housings as well as chillers and freezers.
How do I cut and join it?
A sharp knife or scissors gives a clean square cut. Butt the ends tightly together; for a sealed joint, add a dab of silicone sealant. To go round a tight 90° corner, cut a small V notch in the base or mitre two lengths.
Can I use it near oil?
Occasional splashes are fine, but its oil resistance is only fair. For parts that sit in oil or fuel, a nitrile or fluorosilicone profile is the better choice.
Which colour should I choose?
Translucent is milky and blends into stainless steel, glass and clear plastics. White gives a clean opaque edge for white goods and food areas. Black suits painted machinery and enclosures. All three are the same compound, profile and price.
10m or 30m?
The 10m coil suits single machines and small jobs. The 30m coil costs about 29% less per metre and is the better buy for production runs or several machines. For other lengths or volume pricing, ask our team for a quote.
Need help choosing an edge trim or seal? Contact our team on +44 1282 277786 or sales@industrial-polymers.co.uk.
Product details
| SKU | IP-SIUC-4.1X8X2-10-BLACK |
|---|---|
| Weight | 0.55 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone U Channel – 4.1mm x 8mm for 2mm Panels – 10m or 30m Coil