
Rubber & FoamSKU IP-TPEB-15X18-STD
TPE Sponge Bead Profile – 15mm x 18mm – 50m Coil
This TPE sponge bead profile 15mm x 18mm combines a firm, self-adhesive solid base with a soft hollow foam bead, so it sticks straight onto a frame and squashes to seal gaps of 9mm to 16mm or cushion knocks. It is sold as one continuous 50m coil.
At a glance
- 15mm wide x 18mm high bead seal
- Dual hardness: solid TPE base 57 Shore A, foam bead 15 Shore A
- Self-adhesive backing, no separate glue needed
- Seals clearances of 9mm to 16mm, crushes up to about 25%
- Weather and UV resistant, -35°C to +75°C
- Light at 73g per metre; 50m coil
Typical uses
- Door and hatch seals on cabinets, enclosures and kiosks
- Draught, dust and splash seal on industrial doors and windows
- Soft bump strip on equipment, racking and warehouse fittings
- Edge cushion on jetties, pontoons and boat lockers
- Gap filler on uneven frames where a hard seal will not close
Which one do I need?
Pick the bead by the gap it must close when the door is shut:
| Profile | Suits |
|---|---|
| TPE sponge D 10mm x 8mm | Small gaps on light doors and lids |
| TPE sponge seal 14mm x 20mm | Similar gaps, taller seal |
| TPE sponge bead 15mm x 18mm (this item) | Gaps of 9mm to 16mm, round soft bead |
| TPE sponge D 25mm x 14mm | Wide frames needing a broad, flat-topped cushion |
Technical drawing
Specification
| Base material | Solid TPE (thermoplastic elastomer) |
| Bead material | TPE foam, hollow |
| Colour | Black |
| Overall size | 15mm wide x 18mm high |
| Base thickness | 2mm |
| Bead wall | 2mm |
| Base hardness | 57 Shore A |
| Foam hardness | 15 Shore A |
| Gap range | 9mm to 16mm |
| Temperature range | -35°C to +75°C |
| Weight | 73g per metre |
| Tolerance class | ISO 3302-1 E2 / L2 |
| Fixing | Self-adhesive backing |
| Unit of sale | 50m coil |
How much do I need?
Measure the perimeter of each opening and add them up. Example: a 2000mm x 900mm personnel door is 5.8m round, so a 50m coil seals eight such doors with a little left for trimming. For small 600mm x 600mm control cabinet doors at 2.4m each, one coil covers about twenty.
Fitting tips
- Clean the frame with a degreaser and let it dry fully before peeling the liner.
- Press the base down firmly along its whole length; do not stretch the strip as you lay it or it may shrink back.
- Fit the bead where the door closes squarely onto it, not where it would be dragged sideways.
- At corners, cut and butt-joint the strip rather than folding the bead.
Complete your project
- TPE Sponge Seal – 14mm x 20mm with Adhesive Backing – 50m Coil
- TPE Sponge D Profile – 10mm x 8mm Adhesive Backed – 100m Coil
- TPE Sponge D Profile – 25mm x 14mm Adhesive Backed – 25m Coil
Questions
What gap does it seal?
It is designed for clearances of 9mm to 16mm. The foam bead crushes by up to about a quarter of its height.
Can it be used outdoors?
Yes, the TPE resists weather and UV and works from -35°C to +75°C.
Is it self-adhesive?
Yes, the solid base carries an adhesive backing; clean and dry the surface first for a lasting bond.
Is the material recyclable?
Yes, both the solid TPE and the TPE foam are recyclable.
Need help choosing? Contact our technical team with your panel thickness or application and we will point you to the right profile.
Product details
| SKU | IP-TPEB-15X18-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Sponge Bead Profile – 15mm x 18mm – 50m Coil