
Rubber & FoamSKU IP-TPEU-8.5X25X4-25M
TPE U Channel – 8.5mm x 25mm for 4mm Panels – 25m Coil
A deep black TPE U channel that pushes onto 4mm sheet, glass and panel edges. Its long parallel arms run about 22.7mm down each face, so it grips firmly without glue in most uses, and the 8.5mm rounded bead takes knocks so the edge, and the people working near it, don't. Supplied as one continuous 25m coil.
At a glance
- Size: 8.5mm wide x 25mm high, deep U with parallel arms and a round base
- Fits: 4mm edges only (4mm slot)
- Grip: about 22.7mm of each face covered, one of the deepest grips in our range
- Material: thermoplastic elastomer (TPE), 60 Shore A, black
- Weight: 120 g per metre, about 3 kg per 25m coil
- Push-on: no adhesive needed in normal use; removable and re-fittable
- Cuts cleanly with a knife or shears; offcuts are recyclable
Technical drawing

Specifications
| Property | Value | Source / test method |
|---|---|---|
| Profile | Deep U channel, parallel arms, round base | Manufacturer's drawing |
| Overall width | 8.5 mm | Manufacturer's drawing |
| Overall height | 25.0 mm | Manufacturer's drawing |
| Slot width | 4.0 mm | Manufacturer's drawing |
| Wall (arm) thickness | 2 mm stated ("just over 2 mm"); 2.25 mm from (8.5 − 4) ÷ 2 | Manufacturer's technical data; derived from the drawing |
| Slot depth (grip on each face) | ≈ 22.75 mm | Derived: 25 mm height less a ≈2.25 mm base; not a stated dimension |
| Base outer radius | ≈ 4.25 mm (full round) | Derived from the drawing (half the 8.5 mm width) |
| Panel / edge thickness it fits | 4 mm only (clamping range 4 mm to 4 mm) | Manufacturer's product data and datasheet |
| Material | Thermoplastic elastomer (TPE) | Manufacturer's datasheet |
| Hardness | 60 Shore A | Manufacturer's datasheet (Shore A durometer) |
| Colour | Black | Manufacturer's datasheet |
| Weight per metre | 120 g/m (≈ 3.0 kg per 25 m coil) | Manufacturer's datasheet |
| Use temperature (design range) | −25 °C to +70 °C | Manufacturer's datasheet |
| Temperature, web listing | −40 °C to +90 °C | Manufacturer's product page (wider than the datasheet; we quote the datasheet figure) |
| Dimensional tolerance | ISO 3302-1 class E2 (cross-section) / L2 (length) | ISO 3302-1 (datasheet: quality level 2) |
| Length | 25 m continuous coil | — |
| Density, tensile strength, elongation, tear, compression set | Not published for this profile | Ask us if you need a material certificate |
Materials and compliance
This profile is made from a black thermoplastic elastomer (TPE) at 60 Shore A: firm enough to hold its shape and absorb impacts, flexible enough to follow gentle curves. The manufacturer describes the material as having good resistance to weathering, UV, flex fatigue, tearing, abrasion and many chemicals, and as 100% recyclable.
The manufacturer does not state any food-contact (FDA, EC 1935/2004), WRAS, REACH or RoHS approval for this product, so we make no such claim. If your application needs a declaration, contact us before ordering.
How it fits

- Check the edge is 4mm thick. Deburr it and wipe off oil or grease so the slot can seat fully.
- Start at one end and press the trim down onto the edge with your thumb or a rubber mallet, working along. Don't stretch it as you go, or it will shrink back and leave gaps.
- Cut square with a sharp knife or shears. On outside corners, mitre at 45° or cut a V-notch out of the arms and bend it round.
- Where there is heavy vibration, run a thin bead of contact adhesive in the slot.
Shown to scale

Typical uses
- Safety edging on 4mm sheet metal guards, enclosures and fabrications
- Finishing 4mm glass, polycarbonate and acrylic panel edges
- Running boards, stair and step edges
- Furniture, shelving and display panel edges
- Vending machine and kiosk panels
- Protecting sheet edges in storage and transport
How much do I need?
Add up the edge length and allow about 5% for cutting. Example: 12 guard panels with a 1.8m top edge = 21.6m, or about 22.7m with the allowance. One 25m coil covers it with around 2m to spare.
Other sizes
| Size | Edge it fits | Choose it for |
|---|---|---|
| TPE U 8.4 x 20mm | 1.5mm | Thin sheet, deep grip |
| TPE U 10 x 21mm | 2.5mm | Medium sheet |
| TPE U 7 x 24mm | 3mm | 3mm sheet, very deep grip |
| TPE U 8.5 x 25mm (this item) | 4mm | 4mm panels, deepest grip |
| TPE square U 8 x 12mm | 4mm | Shorter, squarer 4mm edge |
| TPE square U 12 x 16mm | 4mm | Bulkier 4mm bumper edge |
| TPE U 16 x 21mm | 5 – 8mm | Thicker panels |
Frequently asked questions
What panel thickness does it fit?
It is made for 4mm edges, and the manufacturer gives the clamping range as 4mm only. On 3mm sheet it will be loose; use the 7 x 24mm size instead. For 5mm and over, see the 16 x 21mm size.
Do I need glue?
Not usually. The arms grip about 22.7mm down both faces of the edge. Use a thin bead of contact adhesive only where there is strong vibration or frequent knocks along the length.
How do I measure what I need?
Measure your edge thickness with calipers (it should be 4mm), then the total edge length, plus about 5% for cutting. Fitted, the trim makes the edge 8.5mm wide and sits about 2.25mm proud of it.
How do I cut and join it?
Cut with a sharp knife, shears or a fine-toothed saw. Mitre corners at 45°, or notch the arms for bends. Butt joints can be closed with a drop of cyanoacrylate (superglue) suitable for rubber.
What temperatures can it take?
The manufacturer's datasheet gives −25 °C to +70 °C. Their web page quotes −40 °C to +90 °C; we recommend designing to the datasheet range.
What is it used for?
Covering sharp 4mm edges on machine guards, glass and polycarbonate panels, shelving, running boards, steps and vending machines, and protecting sheet edges in handling and transport.
Is it suitable outdoors?
TPE copes well with weather, UV and flexing. For long-term exposure to strong sun or ozone, ask us and we'll suggest an EPDM option if one suits better.
Is it food-safe or certified?
No food-contact or other approvals are stated for this profile, so don't use it where food-contact certification is required.
Can I get a shorter length or another colour?
This listing is a 25m black coil. Contact us for cut lengths or other options.
Need help choosing? Call +44 1282 277786 or email sales@industrial-polymers.co.uk.
Product details
| SKU | IP-TPEU-8.5X25X4-25M |
|---|---|
| Weight | 6.61 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE U Channel – 8.5mm x 25mm for 4mm Panels – 25m Coil