
Rubber & FoamSKU IP-TPEU-15X18.5X11-STD
TPE Square U Channel – 15mm x 18.5mm for 11mm Panels – 25m Coil
A square-section U channel for capping thick edges: 11mm sheet, board, glazing and partition panels. The profile is 15mm wide by 18.5mm high, with flat sides, a flat top and a constant 2mm wall all the way round. Its 11mm parallel slot runs 16.5mm deep, so each arm covers a generous band of the panel face, and a 2mm base sits over the cut edge. The square shape is stiffer than a round-backed channel, so it holds a crisp line and resists being squashed when the edge is knocked. It is extruded from black 60 Shore A thermoplastic elastomer (TPE), supplied as one continuous 25m coil and held in stock.

At a glance
- Fits panels and edges 11mm thick (clamping range 11mm only)
- 15mm wide x 18.5mm high, 11mm parallel slot 16.5mm deep
- Uniform 2mm walls and base: a neat, rigid square edge
- Deep 16.5mm arms grip a wide band of each face, so adhesive is rarely needed
- 60 Shore A TPE: resists weathering, chemicals, tear, abrasion and repeated flexing
- Rated -40°C to +90°C; cuts cleanly with a knife; 100% recyclable
- Black, 25m coil, about £18.93 per metre inc VAT
Typical uses
- Capping 11mm polycarbonate, acrylic and glass machine guards and screens
- Edge finishing on 11mm plywood, MDF and compact-laminate partitions and furniture
- Sheet and plate edges on fabrications and enclosures
- Running boards, steps and stair-edge panels
- Vending machine, kiosk and display cabinet panels
- Protecting thick panel edges in storage, handling and transport

Which size do I need?
Measure the thickness of the edge and match it to the slot. A square U channel needs a snug fit: on a thinner panel it sits loose, on a thicker one it splays the arms. Nearby sizes in our range:
| Profile | Fits panel | Choose it when |
| TPE 22mm x 12mm | 8 to 10mm | the panel is 8 to 10mm and you want a shallow, wide cap |
| TPE 14mm x 14mm | 10mm | the panel is 10mm and you want a compact square edge |
| TPE 16mm x 18mm | 10mm | the panel is 10mm and you want thicker walls |
| TPE 15mm x 18.5mm (this item) | 11mm | the panel is 11mm thick and you want deep 16.5mm cover on each face |
| Silicone 18mm x 22mm | 12mm | the panel is 12mm, or you need silicone's wider temperature range |
Specification
| Property | Value | Standard / source |
| Profile | Square U channel (parallel-sided slot, flat top and sides) | Supplier description |
| Overall width | 15.0 mm | Supplier technical data |
| Overall height | 18.5 mm | Supplier technical data |
| Wall thickness | 2.0 mm, constant | Supplier technical data |
| Gripping arm height (slot depth) | 16.5 mm | Supplier description |
| Slot width | 11.0 mm (15 mm less two 2 mm walls) | Derived from supplier dimensions |
| Base thickness (over the edge) | 2.0 mm (18.5 mm less 16.5 mm arms) | Derived from supplier dimensions |
| Panel / edge thickness it fits | 11 mm (clamping range 11 mm only) | Supplier page |
| Material | Thermoplastic elastomer (TPE) | Supplier technical data |
| Colour | Black | Supplier page |
| Hardness | 60 Shore A | Shore A durometer (supplier page) |
| Maximum temperature | +90 °C | Supplier technical data |
| Minimum temperature | -40 °C | Supplier technical data |
| Dimensional tolerance | ISO 3302-1, class E2 (cross-section) / L2 (length) | ISO 3302-1 |
| Coil length | 25 m, one continuous length | Supplier page |
| Density, tensile strength, elongation, tear, compression set, weight per metre, bend radius | Not published for this profile; ask us if you need them | – |
Material and compliance
Thermoplastic elastomer combines the flexibility of rubber with the processing of a plastic. It springs back after being bent or squeezed, so the arms keep their grip on the panel over time and the trim can be removed and refitted. The supplier states good weathering and chemical resistance, good tear and abrasion resistance, and excellent resistance to flex fatigue, and the material is 100% recyclable.
No food-contact, fire or other approvals (FDA, EC 1935/2004, WRAS, UL 94, REACH or RoHS) are stated for this profile, so we do not claim any. Ask us before using it where a certificate is required.

How much do I need?
Add up the length of every edge you want to cover, add about 5% for corners and offcuts, then divide by 25. For example, twenty 11mm panels each 1.2m x 0.8m have 80m of edge; with 5% added that is 84m, so four 25m coils.
Fitting tips
- Check the panel is a true 11mm: this profile relies on a snug fit to grip.
- Wipe the edge clean and remove burrs or splinters so the trim slides on and grips evenly.
- Start at one end and push the channel on by hand; tap it home with a rubber mallet if needed.
- Cut 1 to 2mm over length and push the ends together so no gap opens.
- A square section does not bend tightly across its flat back: mitre square corners at 45° or cut a V-notch in the base.
Data sheet
Download the technical data sheet (PDF)
Questions
What panel thickness does it fit?
11mm only. On a 10mm panel it will sit loose, and on 12mm it will splay; for those choose the 16mm x 18mm (10mm) channel or the 18mm x 22mm silicone channel (12mm).
Do I need adhesive?
Usually not. The 16.5mm deep arms grip a wide band of each face. A thin bead of adhesive is only worth adding on vibrating machinery or where the trim could be pulled off.
Will it go round corners and curves?
It follows gentle curves in the plane of the panel. For square corners, mitre-cut the trim at 45° or cut a V-notch in the base so the walls meet neatly.
How do I cut and join it?
Cut with a sharp knife, shears or a fine-toothed saw for a square end. Butt the ends together tightly; a drop of cyanoacrylate (superglue) makes a neat permanent joint.
Can it be used outdoors, and what temperatures can it take?
Yes. TPE resists weathering and many chemicals, and the supplier rates this profile from -40°C to +90°C, so it suits unheated buildings, outdoor screens and warm machinery.
What is TPE and how does it differ from rubber?
TPE is a thermoplastic elastomer: it behaves like a soft rubber in use but can be melted and recycled. At 60 Shore A it is firm enough to hold its square shape and soft enough to cushion knocks.
Is it suitable for glass and polycarbonate?
Yes. It is widely used to cover the edges of thick glass, acrylic and polycarbonate guards and screens, protecting both the panel and the people handling it.
How quickly will it arrive?
This trim is held in stock and ships from our UK warehouse; see the dispatch message above the basket button for today's cut-off.
Not sure which profile suits your panel? Contact our team with the panel thickness, or call +44 1282 277786, and we will point you to the right channel.
Product details
| SKU | IP-TPEU-15X18.5X11-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Square U Channel – 15mm x 18.5mm for 11mm Panels – 25m Coil