
Rubber & FoamSKU IP-TPEU-19X12-STD
TPE Square U Channel – 19mm x 12mm for 15mm Panels – 50m Coil
A black TPE square U channel, 19mm wide and 12mm high, that pushes onto the edge of 15mm thick boards and panels. It gives plywood, MDF, HPL and plastic sheet a neat, square, cushioned edge. The 2mm walls and 10mm gripping arms hold by friction, so most jobs need no glue. It comes as one continuous 50m coil, which works out at about £11.07 per metre.
At a glance
- Fits 15mm panels only. The slot is 15mm wide with parallel sides.
- 19.0mm wide × 12.0mm high square profile, 2mm wall and base all round
- 10mm deep gripping arms cover the cut edge and 10mm of each face
- Thermoplastic elastomer (TPE), 60 Shore A: firm, but you can fit it by hand
- Resists UV, weather and most cleaning chemicals; 100% recyclable
- Light at 86g/m: the whole 50m coil weighs about 4.3kg
- In stock in the UK, with same-day dispatch on orders placed before the cut-off
Technical drawing

Specification
| Property | Value | Source / test method |
|---|---|---|
| Profile | Square U channel (edge protector) | Manufacturer datasheet |
| Overall width | 19.0 mm | Nominal, ISO 3302-1 class E2 |
| Overall height | 12.0 mm | Nominal, ISO 3302-1 class E2 |
| Slot width | 15.0 mm, parallel sides | Nominal |
| Clamping range (panel thickness) | 15 mm to 15 mm (15 mm panels only) | Manufacturer datasheet |
| Gripping arm height (slot depth) | 10.0 mm | Nominal |
| Wall thickness | 2.0 mm, uniform | Nominal |
| Base thickness | 2.0 mm (12.0 overall − 10.0 arms) | Nominal |
| Material | Thermoplastic elastomer (TPE) | Manufacturer datasheet |
| Hardness | 60 Shore A | Shore A durometer (the manufacturer does not name the standard) |
| Colour | Black | Visual |
| Weight | 86 g/m (about 4.3 kg per 50 m coil) | Manufacturer datasheet |
| Service temperature (datasheet) | −25 °C to +70 °C | Manufacturer datasheet: use this range for design |
| Service temperature (material, short term) | −40 °C to +90 °C | Manufacturer's product information for the TPE grade |
| Dimensional tolerance | ISO 3302-1 E2 (cross-section) / L2 (length) | ISO 3302-1, quality level 2 |
| Density, tensile strength, elongation, tear, compression set | Not published by the manufacturer for this profile | None |
| Recyclability | 100% recyclable TPE | Manufacturer's product information |
| Unit of sale | One continuous 50 m coil | None |
Two temperature ranges are published for this product. The datasheet gives −25 °C to +70 °C and the product information gives −40 °C to +90 °C. Design to the datasheet range. Treat the wider range as the limit for short exposures.
Materials and compliance
The channel is extruded from a thermoplastic elastomer, a rubber-like material that resists UV, ozone, weathering and many cleaning chemicals, and takes repeated flexing without cracking. Because it is a thermoplastic, it is 100% recyclable. The manufacturer does not state any food-contact, fire-rating or other third-party approvals for this profile, so we do not claim any. Contact us before specifying it where a certified material is required.
Typical uses
- Capping the edges of 15mm plywood, MDF and HPL in workshops, shopfitting and furniture
- Protecting the edges of 15mm plastic sheet screens, partitions and guards
- Finishing the edges of van racking, shelving and vehicle floor boards
- Edging display stands, kiosks and vending machine panels
- Covering rough cut edges on stair treads and running boards to reduce knocks and snagging
Which size do I need?
Measure the panel with callipers or a steel rule. This channel suits 15mm material only. On a 12mm board it will be loose, and on 18mm it will not go on.
| Panel thickness | Channel to choose |
|---|---|
| 8mm to 10mm | TPE square U channel 22mm x 12mm |
| 10mm (deeper grip) | TPE square U channel 16mm x 18mm |
| 15mm | This channel, 19mm x 12mm |
| 25mm | TPE square U channel 29mm x 12mm |
How much do I need?
Add up every edge you want to cap and allow about 2% for trimming and corners. For example, the front edges of six 2,400mm shelves need 14.4m. The 1,200mm side panels of three bays (six edges) add 7.2m, for a total of 21.6m, or 22m with the allowance. One 50m coil covers that job twice.
Fitting
- Deburr or sand the panel edge so that it is square and free of splinters.
- Wipe the edge with a degreaser and let it dry. A clean edge grips much better.
- Start at one end and press the channel on by hand, working along the edge without stretching the TPE.
- Seat stubborn sections with a rubber mallet.
- At external corners, either cut a 90° V-notch out of the arms and fold the channel round, or mitre two pieces at 45°.
- Where the edge may be pulled or knocked repeatedly, run a thin bead of rubber-compatible adhesive in the slot.
Questions
What thickness of panel does this U channel fit?
Exactly 15mm. The clamping range is 15mm to 15mm. For other thicknesses, use the size table above.
Do I need glue?
Usually not. The 10mm arms grip by friction, especially on a clean, deburred edge. Add adhesive only where the trim will be pulled or knocked repeatedly.
Can it go round corners and curves?
It follows gentle curves on its own. For tight external corners, notch the arms with a V-cut so the channel folds neatly, or mitre two pieces at 45°.
How do I cut and join it?
Cut it with a sharp utility knife, heavy-duty scissors or secateurs; TPE cuts cleanly and does not fray. Butt joints can be bonded with a cyanoacrylate (superglue) suitable for elastomers.
Can it be used outdoors?
Yes. TPE resists UV, rain and weathering. Keep to −25 °C to +70 °C in service; the material tolerates −40 °C to +90 °C for short periods.
What is it made of, and is it rubber?
It is a thermoplastic elastomer (TPE): it feels and flexes like rubber but can be melted down and recycled. The hardness is 60 Shore A, firm enough to protect an edge and soft enough to fit by hand.
Is the 50m coil one piece?
Yes. It is a single continuous 50m length, so long runs need no joins.
Will it fit glass or sheet metal?
Yes, provided the sheet is 15mm thick. Most glass and sheet metal is much thinner, so check the size table for a channel to suit.
Not sure which channel you need? Call +44 1282 277786, email sales@industrial-polymers.co.uk or contact our team with your panel thickness.
Product details
| SKU | IP-TPEU-19X12-STD |
|---|---|
| Weight | 10.14 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Square U Channel – 19mm x 12mm for 15mm Panels – 50m Coil