
Rubber & FoamSKU IP-TPEU-29X12X25-STD
TPE Square U Channel – 29mm x 12mm for 25mm Panels – 25m Coil
This TPE square U channel 29mm x 12mm is a black push-fit edge cap for boards and panels exactly 25mm thick, sold as one continuous 25m coil. Its flat-sided square profile sits neatly over thick partition, worktop and machine-base edges, and the tapered inner grip holds it on without adhesive.
At a glance
- Square U profile 29mm wide x 12mm deep
- Made to fit 25mm thick panels and boards
- 2mm walls with a tapered inner grip
- Black thermoplastic elastomer (TPE), 60° Shore A
- Working temperature -40°C to +90°C
- Resists weathering, chemicals and ageing
- Supplied as one 25m coil
Typical uses
- Edge cap for 25mm MDF, ply and composite partition panels
- Protective trim on thick workbench, worktop and shelf edges
- Bump protection on machine bases and equipment plinths
- Finishing the edges of thick step boards and stair treads
- Covering cut edges on display stands and shopfitting panels
Which one do I need?
| Profile | Panel thickness | Best for |
|---|---|---|
| TPE square U channel 22mm x 12mm | 8mm to 10mm | Thinner sheet, same shallow height |
| TPE square U channel 16mm x 18mm | 10mm | Deeper legs on 10mm panels |
| TPE square U channel 29mm x 12mm (this item) | 25mm | Thick boards and worktop edges |
| TPE square U channel 46mm x 43mm | Larger profile | Heavy edges needing deep legs |
Technical drawing
Specification
| Material | Thermoplastic elastomer (TPE) |
| Colour | Black |
| External width | 29mm |
| External height | 12mm |
| Wall thickness | 2mm |
| To fit panel thickness | 25mm |
| Hardness | 60° Shore A |
| Operating temperature | -40°C to +90°C |
| Tolerance class | ISO 3302-1 E2 – L2 |
| Unit of sale | One 25m coil |
How much do I need?
Measure every exposed edge and add about 5% for trimming. For example, a run of six 25mm partition panels each 1800mm long needs 6 x 1.8m = 10.8m; with 5% allowance that is about 11.4m, so one 25m coil covers it with plenty left for a second run.
Fitting tips
- Check the board is a true 25mm; thinner boards will let the channel sit loose.
- Clean off dust and burrs so the tapered grip seats fully.
- Start at one end and press down along the length, using a soft mallet on stiff sections.
- Mitre-cut the ends at external corners for a neat, square finish.
- Cut with a sharp knife or shears and keep ends square.
Complete your project
- TPE Square U Channel – 16mm x 18mm for 10mm Panels – 25m Coil
- TPE Square U Channel Edge Trim – 22mm x 12mm for 8–10mm Panels – 25m Coil
- TPE Square U Channel – 46mm x 43mm – 25m Coil
Questions
Will it fit an 18mm or 22mm board?
No. This square U channel is made for 25mm thick panels; on thinner boards it will sit loose. Choose a smaller profile for thinner sheet.
Do I need adhesive?
Not usually. The tapered inner grip holds it on a 25mm edge. Add a flexible adhesive only where the trim will be knocked or pulled often.
Is it suitable outdoors?
Yes. TPE resists weathering and chemicals and works from -40°C to +90°C.
How is it supplied?
As one continuous 25m coil of black TPE edge trim, cut to length on site.
How do I cut it?
Use a sharp utility knife or heavy-duty shears and cut square for a neat joint.
Not sure which size fits your panel? Contact our team and we will help you choose.
Product details
| SKU | IP-TPEU-29X12X25-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Square U Channel – 29mm x 12mm for 25mm Panels – 25m Coil