
Rubber & FoamSKU IP-TPEUC-9X17X3-STD
TPE Square U Channel – 9mm x 17mm, Tapered Grip for 3mm Panels – 50m Coil
A deep, flat-sided TPE square U channel, 9mm x 17mm, for finishing and protecting 3mm thick edges. The slot is only 1mm wide at the mouth and widens to 3mm at the base, so the walls are forced apart as you push it onto a 3mm panel and then clamp it firmly along 13.5mm of each face. No adhesive is needed, and it can be taken off and refitted. Supplied as one continuous 50m coil, black, from UK stock.
At a glance
- Size: 9mm wide at the base x 17mm high, for 3mm panels and sheets
- Tapered grip: 1mm slot mouth opening to 3mm, 13.5mm deep, for a tight hold without glue
- Tough section: 2mm walls at their thinnest, a solid 3.5mm base over the cut edge
- Material: 60 Shore A thermoplastic elastomer (TPE), resistant to UV, weathering and many chemicals, with good flex-fatigue, tear and abrasion resistance
- Easy to work: cuts cleanly with a sharp knife; 100% recyclable
- Value: £535.35 per 50m coil inc VAT, which is about £10.71 per metre
Typical uses
- Safety edging on 3mm sheet-metal machine guards, brackets and enclosures
- Edge finish on 3mm acrylic, polycarbonate and glazing panels, screens and displays
- Running boards, step and stair edges
- Furniture, shopfitting and vending machine panels
- Edge protection on 3mm sheet during handling and transport
Technical drawing

Nominal dimensions in mm, shown as extruded. When fitted, the walls spread so the slot matches the 3mm panel.
Which size do I need?
Measure the panel thickness first. This profile is made for 3mm edges only. Pick the depth and width by how much of the face you want covered and how much protection you need.
| Profile | Overall size | Fits panel | Coil | Best for |
|---|---|---|---|---|
| TPE U channel 7 x 15mm | 7 x 15mm | 3mm | 25m | Slimmer, lighter trim |
| TPE square U channel 7 x 18mm | 7 x 18mm | 3mm | 25m | Narrow square look, deep grip |
| TPE square U channel 9 x 17mm (this item) | 9 x 17mm | 3mm | 50m | Tapered grip, 3.5mm base, long runs |
| TPE square U channel 9 x 20mm | 9 x 20mm | 3mm | 25m | Deepest cover on 3mm |
| TPE square U channel 16 x 18mm | 16 x 18mm | 10mm | 25m | Thick boards and panels |
Specification
| Property | Value | Test method / source |
|---|---|---|
| Profile and dimensions | ||
| Profile | Square U channel with tapered walls (push-on edge trim) | – |
| Overall width (base) | 9.0 mm | Nominal, ISO 3302-1 class E2 |
| Overall height | 17.0 mm | Nominal, ISO 3302-1 class E2 |
| Slot width at the mouth | 1.0 mm | Nominal, manufacturer drawing |
| Slot width at the base | 3.0 mm | Nominal, manufacturer drawing |
| Slot depth (grip on each face) | 13.5 mm | Nominal, manufacturer drawing |
| Wall thickness at the mouth (thinnest point) | 2.0 mm | Nominal, manufacturer data |
| Base thickness (thickest point) | 3.5 mm | Nominal, manufacturer data |
| Fits edge / panel (clamping range) | 3 mm to 3 mm | Manufacturer datasheet |
| Dimensional tolerance | Cross-section class E2, length class L2 (quality level 2) | ISO 3302-1 |
| Weight | 98 g per metre, approx. 4.9 kg per 50 m coil | Manufacturer datasheet |
| Material | ||
| Material | Thermoplastic elastomer (TPE) | – |
| Hardness | 60 Shore A | Shore A durometer (ISO 48-4) |
| Working temperature | -25 °C to +70 °C | Manufacturer datasheet (a wider -40 °C to +90 °C is also quoted for the material; we list the more cautious datasheet figure) |
| Environmental resistance | UV, weathering, chemicals and flex fatigue; good tear and abrasion resistance | Manufacturer data |
| Density, tensile strength, elongation, tear strength, compression set | Not published for this profile; ask us if you need them for a specification | – |
| Supply | ||
| Colour | Black | – |
| Unit of sale | One continuous 50 m coil | – |
| Price per metre | About £10.71 inc VAT | £535.35 ÷ 50 m |
| Part number | IP-TPEUC-9X17X3-STD | – |
| Availability | Held in stock | – |
Material and compliance
This profile is extruded from a black thermoplastic elastomer (TPE) of 60 Shore A. TPE is a rubber-like material that can be reprocessed, which is why it is fully recyclable, and it springs back after long periods under compression, so the grip on the panel holds over time.
No food-contact (FDA, EC 1935/2004), WRAS, REACH or RoHS approval is stated for this profile, so we do not claim one. If your project needs a declaration, contact us before ordering.
How much do I need?
Add up the length of every edge you will trim and allow about 5% for corners and offcuts. Example: twelve 3mm guard panels, each trimmed on three sides of 0.8m + 1.2m + 1.2m = 3.2m, need 12 x 3.2m = 38.4m, plus 5% = about 40.3m. One 50m coil covers the job with room to spare.
Fitting tips
- Deburr the cut edge and wipe it with a degreaser; a clean, smooth edge lets the tapered walls grip evenly.
- Start at one end and press the channel on with your thumb, working along. Do not stretch it, or it will shrink back and leave gaps.
- Use a rubber or soft-faced mallet to seat it fully if the panel is stiff.
- At outside corners, cut a small V-notch in the base so the trim turns neatly; at tight curves allow a generous bend.
- Cut ends square with a sharp knife and butt them tightly together for a tidy joint.
Frequently asked questions
Will it fit my panel?
It is made for 3mm thick edges. On thinner sheet the grip will be loose; on thicker sheet it will not seat fully. For other thicknesses see the size table above or contact us.
Do I need glue to hold it on?
No. The 1mm slot mouth is much narrower than the panel, so the walls clamp the edge along 13.5mm of each face. It can be removed and refitted. Wiping the edge with a degreaser first improves the grip.
What is the difference between this and the 9 x 20mm square channel?
Both fit 3mm. The 9 x 17mm has a tapered slot and a 3.5mm base and comes as a 50m coil; the 9 x 20mm covers more of each face and comes as a 25m coil.
Can it be used outdoors?
Yes. TPE resists UV, weathering and many chemicals. The datasheet working range is -25 °C to +70 °C; avoid fitting it next to heat sources hotter than that.
What is it made of, and is it food-safe?
Black 60 Shore A thermoplastic elastomer. No food-contact approval is stated for this profile, so do not use it where it touches food.
How do I cut and join it?
Cut with a sharp utility knife or fine-tooth blade for a clean, square end. Butt the ends together at joins, or notch the base to turn corners in one continuous length.
How quickly will it arrive?
It is held in stock and ships in a single 50m coil. Order before the daily cut-off for same-day dispatch.
Not sure which profile you need? Contact our team with your panel thickness, or call +44 1282 277786 or email sales@industrial-polymers.co.uk.
Product details
| SKU | IP-TPEUC-9X17X3-STD |
|---|---|
| Weight | 11.46 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Square U Channel – 9mm x 17mm, Tapered Grip for 3mm Panels – 50m Coil